Android News - Page 25 of 374 - CNX Software

February 1, 2023February 1, 2023 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

WinLink E850-96Board SBC is powered by Samsung Exynos 850 Octa-core Cortex-A55 SoC

WinLink E850-96Board is a 96Boards CE Extended-compliant single board computer (SBC) based on a Samsung Exynos 850 octa-core Cortex-A55 processor plus 64GB flash and 4GB RAM found in a single eMCP (embedded Multi-Chip Package) chip. While the Samsung Exynos 5422 based ODROID-XU4/XU4Q was one of the most popular SBCs when it launched in 2015 thanks to its features set and affordable pricing, we haven’t really seen other interesting Samsung Exynos SBCs in recent years. I did notice a WinLink E850-96Board based on Exynos 850 in the Linux 5.17 release last March, but there was not enough information then. The good news is that the board has now launched so let’s have a closer look. WinLink E850-96Board “All-in” board specifications: SoC – Samsung Exynos 850 CPU – Octa-core Arm Cortex-A55 processor @ up to 2.0GHz GPU – Arm Mali-G52 MP1 GPU supporting OpenGL ES1.1/2.0/3.2, OpenCL 2.0 Full Profile, and Vulkan 1.0/1.1 […]

January 27, 2023 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Allwinner TV303 quad-core Cortex-A53 “Smart Screen” processor is made for projectors

Previously known for its tablet SoCs, Allwinner has been focusing on low-cost Cortex-A7 and Cortex-A53 processors for consumer devices in recent years, and the Allwinner TV303 quad-core Cortex-A53 processor is yet another one and appears to be the first of Allwinner TV-series processors designed for “smart screens”, notably smart Android projectors. I could not find any references for TV303 on the Allwinner website, but the company did publish a post on Weixin about a “Smart Android Projector” by Hotack based on the new processor and showcased at CES 2023. Allwinner TV303 preliminary specifications: CPU – 4x Arm Cortex-A53 GPU – Arm Mali-G31 VPU – 4K hardware video decoding + image quality engine Video Output – Up to Full HD Video Input – HDMI input The projector itself features two stereo speakers, WiFi 6 connectivity, and can be turned into a Bluetooth speaker. It also supports keystone correction and autofocus. Allwinner […]

January 22, 2023November 29, 2024 by Jean-Luc Aufranc (CNXSoft) - 63 Comments

Radxa ROCK 5A SBC – A Raspberry Pi 4 lookalike with up to 16GB RAM, Rockchip RK3588S SoC

Radxa has just unveiled the ROCK 5A single board computer (SBC) following Raspberry Pi 4 form factor and powered by a Rockchip RK3588S octa-core Cortex-A76/A55 processor coupled with up to 16GB of RAM as a way to celebrate Chinese New Year 2023. The Radxa ROCK 5A (aka ROCK5 Model A) closely follows the Raspberry Pi 4 layout, including two micro HDMI ports, a 3.5mm AV port, a microSD card, a 40-pin GPIO header, four USB ports, and a Gigabit Ethernet port. The MIPI DSI connector is there too, and so is the MIPI CSI camera connector, but in a different location. Radxa also added some features such as an M.2 socket for a wireless module (since there’s none on board) and eMMC flash module connectors, among other smaller changes (e.g. Power button!). ROCK 5A specifications: SoC – Rockchip RK3588S CPU – Octa-core processor with 4x Cortex-A76 cores @ up to […]

January 9, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Khadas VIM1S (Amlogic S905Y4) SBC review with Android 11

We’ve previously tested Ubuntu 22.04 on Khadas VIM1S Amlogic S905Y4 SBC, so we’ll switch to Android 11 in the second part to check out the user experience and benchmark the system under Android. Installing Android 11 on Khadas VIM1S board with OOWOW We’ll basically follow the same procedure as with Ubuntu to flash the Android OS. Press and hold the Function button, press the Reset button, and release the Function button. to enter the OOWOW Wizard, and if an Ethernet cable is not connected, select Network to configure Wi-Fi as the installation process requires downloading an image from Khadas servers. This time, we’ll select the latest Android 11 image namely vim1s-android-11-v221020.raw.img.xz At just 525 MB in size (when compressed), the Android 11 image for Khadas VIM1S board is fairly compact. Installing Android with OOWOW is really easy with the interface downloading and flashing the image to the eMMC flash without […]

January 5, 2023January 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Banana Pi BPI-CM4 Amlogic A311D system-on-module launched for $95

Banana Pi BPI-CM4 on Raspberry Pi CM4 IO board

Banana Pi BPI-CM4 system-on-module powered by an Amlogic A311D hexa-core Cortex-A73/A53 processor and compatible with the Raspberry Pi CM4 module has now been launched for $95 and up. Banana Pi introduced the Raspberry Pi CM4 compatible module with Amlogic A311D CPU last May with some 3D renders and specifications, and we expected a launch in Q4 2022 or Q1 2023 at the time. The Banana Pi BPI-CM4 is now available together with a carrier board so let’s have another look. Banana Pi BPI-CM4 specifications: SoC – Amlogic A311D hexa-core processor with 4x Arm Cortex-A73 @ 2.0 GHz and 2x Arm Cortex-A53, Arm Mali-G52 MP4 (6EE) GPU, 5 TOPS NPU System Memory – 4GB LPDDR4 RAM Storage – 16GB eMMC flash (up to 128GB) Networking Realtek RTL8211F Gigabit Ethernet PHY on-module Dual-band WiFi 5 up to 867Mbps and Bluetooth 5.2 via Realtek RTL8822CS module and 2x u.FL antenna connectors 2x 100-pin […]

January 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

NXP i.MX 95 processor features Cortex-A55, Cortex-M33, and Cortex-M7 cores, eIQ Neutron NPU

NXP i.MX 95 is an upcoming Arm processor family for automotive, industrial, and IoT applications with up to six Cortex-A55 application cores, a Cortex-M33 safety core, a Cortex-M7 real-time core, and NXP eIQ Neutron Neural Network Accelerator (NPU). We’re just only starting to see NXP i.MX 93 modules from companies like iWave Systems and Forlinx, but NXP is already working on its second i.MX 9 processor family with the i.MX 95 application processor family equipped with a higher number of Cortex-A55 cores, an Arm Mali 3D GPU, NXP SafeAssure functional safety, 10GbE, support for TSN, and the company’s eIQ Neutron Neural Processing Unit (NPU) to enable machine learning applications. NXP i.MX 95 specifications: CPU Up to 6x Arm Cortex-A55 cores with 32KB I-cache, 32KB D-cache, 64KB L2 cache, 512KB L3 cache with ECC 1x Arm Corex-M7 real-time core with 32KB I-cache, 32KB D-cache, 512KB TCM with ECC 1x Arm Cortex-M33 […]

January 3, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

MediaTek Genio 700 Cortex-A78/A55 IoT processor targets industrial and Smart Home applications

MediaTek Genio 700 is an octa-core Arm processor with two Cortex-A78 cores, six Cortex-A55 cores, a Mali-G57 GPU, and a 4 TOPS AI accelerator designed for consumer and industrial IoT applications. The new processor is a cost-down version of the Genio 1200 premium AIoT processor introduced last year with four Cortex-A78 and four Cortex-A55 cores. The Genio 700 offers many of the same features but with lower performance/capabilities, including a 3-core GPU and an AI accelerator limited to 4.0 TOPS, as well as support for dual displays up to 4K + Full HD (instead of 2x 4K), and 32MP single cameras (instead of 48 MP). MediaTek Genio 700 specifications: CPU – Octa-core processor with 2x Cortex-A78 cores @ up to 2.2 GHz, 6x Cortex-A55 cores @ up to 2.0 GHz GPU – Arm Mali-G57 MC3 GPU VPU Encoding up to 4Kp60 with H.265/HEVC Decoding up to 4Kp75, AV1, VP9, HEVC, […]

January 2, 2023January 3, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

MECOOL KM7 Plus runs Google TV OS on Amlogic S905Y4 SoC

MECOOL KM7 Plus is a TV box powered by an Amlogic S905Y4 quad-core Cortex-A35 processor and running Google TV OS based on Android 11 TV OS, instead of just the more common Android 11 TV OS. Amlogic S905Y4 quad-core Cortex-A35 processor was first unveiled in January 2021 for 4K Android TV dongles with AV1 support, but we had not seen many hardware platforms with the process apart from Khadas VIM1S SBC for which we just published a review with Ubuntu 22.04. MECOOL KM7 PLUS specifications: SoC – Amlogic S905Y4 quad-core Arm Cortex-A35 @ up to 2.0 GHz with Arm Mali-G31 MP2 GPU System Memory – 2 GB LPDDR4-2400 Storage – 16 GB eMMC flash, micro SD slot Video Output HDMI 2.1 up to 4K @ 60 Hz with HDR10+, HRD10, HLG, CEC, HDCP 2.2/2.3 AV port with compositive video (and analog audio) Video Decoder H.265, AV1, VP9, AVS2 up to […]