Android News - Page 14 of 371 - CNX Software

August 29, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

LoRaWAN IoT Button ships with open-source firmware, bootloader, and Android app

LoRaWAN is often used for asset tracking or environmental monitoring, for example, to track cattle location, or monitor temperature and humidity in a field, but n-Fuse’s “LoRaWAN IoT Action Button” enables human interaction and comes with open-source firmware, bootloader, and soon the source code for the Android app. Most of the n-Fuse STx-LR family of LoRaWAN nodes integrates environmental sensors but the LoRaWAN IoT Action Button is different with support supports single, double, and long presses, as well as tactile feedback. n-Fuse STx-LR family comes in three variants with the following key features: MCU – STMicro STM32L071KZU6 Arm Cortex-M0+ microcontroller @ 32 MHz with 192KB flash, 20KB RAM sta-lr – Action button with tactile feedback. stx-lr – TI HDC2080 environmental sensor (Temperature, Humidity), BMA400 motion sensor (acceleration), magnetic field sensitive Reed switch, ambient light sensor, and proximity sensor. ste-lr – Bosch BME680 environmental sensor with temperature, humidity, air pressure, and […]

August 29, 2023August 29, 2023 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Orange Pi Compute Module 4 – A low-cost Rockchip RK3566-powered alternative to Raspberry Pi CM4

Orange Pi Compute Module 4 is a system-on-module mechanically and electrically compatible with the Raspberry Pi CM4, but powered by a Rockchip RK3566 quad-core Arm Cortex-A55 AI processor just like the Radxa CM3 introduced a few years ago, or more recently the Banana Pi BPI-CM2 (RK3568). The new module, also called Orange Pi CM4 for shorts, comes with 1GB to 8GB RAM, 8GB to 128GB eMMC flash, and an optional 128/256MBit SPI flash, as well as a Gigabit Ethernet PHY and on-board WiFi 5 and Bluetooth 5.0. It comes with the two 100-pin high-density connectors found on the Raspberry Pi CM4, and a smaller 24-pin connector for extra I/Os. Orange Pi Compute Module 4 specifications: SoC – Rockchip RK3566 quad-core Arm Cortex-A55 processor @ 1.8 GHz with Arm Mali-G52 2EE GPU, 0.8 TOPS AI accelerator, 4Kp60 H.265/H.264/VP9 video decoding, 1080p100f H.265/H.264 video encoding System Memory – 1GB, 2GB, 4GB, or […]

August 28, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

SemiDrive D9-Pro (D9360) Arm Cortex-A55/R5 processor powers industrial CPU module for motor control

MYD JD9360 SemiDrive D9 Pro Development Board

MYiR MYC-JD9360 is a CPU Module powered by SemiDrive D9-Pro (D9360) processor with six Arm Cortex-A55 application cores, a dual-core lock-step Cortex-R5 real-time core along with a PowerVR GPU, 4Kp30 H.265/H.264 VPU and a 0.8 TOPS NPU, and designed for motion control and industrial applications. The MYC-JD9360 CPU module also comes with 2GB LPDDR4, 16GB eMMC flash, 16MB QSPI Flash, 256Kbit EEPROM, and exposes I/Os such as PCIe 3.0, USB 3.0, CAN FD, and TSN-enabled Gigabit Ethernet through a 314-pin MXM connector. The company also provides the MYD-JD9360 development board to quickly get started with the module and evaluate the solution. MYiR MYC-JD9360 CPU module with SemiDrive D9-Pro SoC Specifications: SoC – SemiDrive D9-Pro (D9360) CPU Application – Hexa-core Arm Cortex-A55 processor @ 1.6 GHz Real-time – Dual-core lock-step Cortex-R5 cores @ 800MHz GPU – Imagination PowerVR 9XM GPU @ 100 GFLOPS VPU – 4Kp30 H.265/VP8/VP9 video decoder, 4Kp30 H.264 […]

August 28, 2023September 19, 2023 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Sipeed unveils RISC-V tablet, portable Linux console, and cluster

Sipeed RISC-V tablet, cluster, Linux console

Sipeed has unveiled three new hardware platforms based on the LM4A RISC-V system-on-module found in their LicheePi 4A SBC, namely the Lichee Cluster 4A cluster for native RISC-V compilation, the Lichee Pad 4A 10.1-inch tablet running Android 13 or Debian, and the Lichee Console 4A a portable Linux console with a small 7-inch display and a built-in keyboard. As a quick reminder, the Sipeed LM4A SoM is based on the Alibaba T-Head TH1520 quad-core RISC-V processor @ 1.8 to 2.5 GHz that has just gotten some support in Linux 6.5, comes with up to 16GB RAM and up to 64 GB eMMC flash, integrates two Gigabit Ethernet PHY, and exposes all I/Os through a 260-pin SO-DIMM connector. We’ve previously noticed the TH1520 module delivers performance similar to the Raspberry Pi Compute Module 4 and even more when using a customized toolchain. Lichee Cluster 4A All new Sipeed hardware platforms feature […]

August 27, 2023August 30, 2023 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Cool Pi Arm Linux Laptop with Rockchip RK3588 SoM sells for $358 and up.

Cool Pi has put its CM5 Rockchip RK3588 system-on-module to good use by integrating it into a 14.1-inch laptop with 1920×1080 resolution running Android 12, Ubuntu 22.04, or other Linux distributions. The Cool Pi laptop comes with up to 32GB LPDDR4X memory, up to 256GB eMMC flash, features an M.2 socket for additional NVMe storage, as well as HDMI 2.1 video output and a USB-C port with DisplayPort Alt. mode to enable triple display setups with the laptop. Cool Pi laptop specifications: System-on-Module – Cool Pi CM5 SoC – Rockchip RK3588 octa-core processor with 4x Cortex‑A76 cores @ up to 2.2 GHz, 4x Cortex‑A55 core @ 1.8 GHz Arm Mali-G610 MP4 “Odin” GPU @ 1.0 GHz Video decoder – 8Kp60 H.265, VP9, AVS2, 8Kp30 H.264 AVC/MVC, 4Kp60 AV1, 1080p60 MPEG-2/-1, VC-1, VP8 Video encoder – 8Kp30 H.265/H.264 video encoder 6 TOPS NPU System Memory – 4GB, 8GB, 16GB, or […]

August 25, 2023January 9, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Youyeetoo YY3568 devkit review – Part 1: Unboxing, specifications, and Android 11 testing

Youyeetoo has sent us a review sample of their YY3568 “Bundle 5” devkit with the Rockchip RK3568-powered YY3568 SBC, an 11.6-inch touchscreen display, a MIPI camera module, and all accessories required to get started. We were especially interested in using it to play with the 1 TOPS NPU in the Rockchip RK3568 in Linux, but we’ll start the Youyeetoo YY3568 review with an unboxing, some specifications, and a quick review with Android 11 before switching to Debian 10 in the second part of the review. Youyeetoo YY3568 devkit unboxing The YY3568 single board computer itself is comprised of a carrier board and a YY3568-Core board with a Rockchip RK3568 processor, as well as 8GB RAM, 64GB eMMC flash, and WiFi 5 and Bluetooth 5.0 module. The board is suitable for various applications from generic computing to video playback and AI workloads. YY3568 SBC specifications and hardware overview Youyeetoo YY3568 board […]

August 8, 2023August 8, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Banana Pi BPI-CM2 – A Raspberry Pi CM4-compatible Rockchip RK3568 SoM with extra I/Os

Banana Pi BPI-CM2 is another Raspberry Pi CM4-compatible system-on-module, this time based on a Rockchip RK3568 quad-core Cortex-A55 SoC and with a twist as besides the two 100-pin high-density connectors, the module adds two 70-pin high-density connectors for the extra I/Os provided by the Rockchip processor such as PCIe 3.0, USB 3.0, eDP, MIPI DSI, and an additional Gigabit Ethernet. The Rockchip RK3568 module comes with many of the same features and options as the Raspberry Pi CM4 with 2GB to 8GB RAM, 8GB to 256GB eMMC flash, optional WiFi 5 and Bluetooth 5.0 connectivity, and an on-module Ethernet transceiver, in this case, a Realtek RTL8211F. Banana Pi BPI-CM2 specifications: SoC – Rockchip RK3568 CPU – Quad-core Cortex-A55 processor @ up to 2.0 GHz GPU – Arm Mali-G52 2EE GPU with support for OpenGL ES 1.1/2.0/3.2, OpenCL 2.0, Vulkan 1.1 AI accelerator – 0.8 TOPS NPU VPU – 4Kp60 H.265/H.264/VP9 […]

August 5, 2023August 7, 2023 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Orange Pi 3B – A Rockchip RK3566 SBC with an M.2 NVMe/SATA SSD socket, up to 8GB RAM

Orange Pi 3B is a new Rockchip RK3566 SBC that’s like a supercharged Raspberry Pi 3B board with the same form factor, but with a faster processor, up to 8GB RAM, and support for multiple storage options with a microSD card slot, an eMMC flash socket, an M.2 Key-M socket for NVMe (PCIe 2.1) or SATA III SSDs, as well as an SPI flash that should enable features like network boot. The board also features HDMI 2.0 and eDP display intefaces, a Gigabit Ethernet port, a WiFI 5 and Bluetooth 5.0 wireless module, four USB ports, MIPI DSI and CSI connector, and the 40-pin Raspberry Pi GPIO header. It’s powered through a USB-C port taking 5V instead of the micro USB port found in the Raspberry Pi 3B. Orange Pi 3B specifications: SoC – Rockchip RK3566 CPU – Quad-core Cortex-A55 processor @ up to 1.8 GHz GPU – Arm Mali-G52 […]