allwinner News - Page 11 of 22 - CNX Software

November 10, 2016November 15, 2016 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Allwinner H2 Linux & Android SDK, and Allwinner XR819 WiFi Driver Released

Orange Pi Zero is an interesting little ARM Linux board thanks to its low price, but also because it features a new Allwinner H2 / H2+ quad core Cortex A7 processor very similar to Allwinner H3 minus the 4K video decoding part, as well as Allwinner XR819 WiFi module, which I have not seen on any other boards so far. But hardware without software is pretty much useless, so developers will be happy to find out that Allwinner H2 SDK with Linux (lichee) and Android has been released or leaked, and it also includes the Allwinner XR819 WiFi driver. You’ll find the SDK on Zoobab server with three main directory / files: Android folder – Android 4.4.2 SDK lichee folder – Linux 3.4.39 source code. However you’d probably better use Linux 3.4.113 currently released by sunxi-linux, or Linux mainline. The latter does have some limitations, and may or may not […]

November 2, 2016July 31, 2019 by Jean-Luc Aufranc (CNXSoft) - 80 Comments

Orange Pi Zero Allwinner H2+ Board with WiFi and Ethernet is Up for Sale for $7 and Up

Orange Pi Zero development board powered by Allwinner H2+ quad core Cortex A7 processor with 256 to 512MB RAM, Ethernet, and USB ports is now available for sale on Aliexpress for just $6.99, with shipping adding $3.39 in my case bringing the total to $10.38. Orange Pi Zero specifications: SoC – Allwinner H2(+) quad core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU @ 600 MHz System Memory – 256 to 512 MB DDR3-1866 SDRAM Storage – micro SD card slot Connectivity – 10/100M Ethernet + 802.11 b/g/n WiFi (Allwinner XR819 WiFi module) with u.FL antenna connector and external antenna USB – 1x USB 2.0 host ports, 1x micro USB OTG port Expansion headers – Unpopulated 26-pin “Raspberry Pi B+” header + 13-pin header with headphone, 2x USB 2.0, TV out, microphone and IR receiver signals Debugging – Unpopulated 3-pin header for serial console Misc – 2x LEDs Power […]

August 30, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

C.H.I.P Board and Allwinner A13/R8 SoCs To Get VPU Support in Linux Mainline

Allwinner has mixed relationships with open source communities such as Kodi, especially due to issues with its closed-source CedarX VPU drivers, and some GPL violations. However to address the former, linux-sunxi community has been working on open source Cedrus library for the video processor unit on Allwinner processors, that’s been successfully tested on boards such as Orange Pi One. Free Electrons has gone further, as they’ve made sure Cedrus now works with Linux mainline kernel, currently Linux 4.8, and tested it on Allwinner R8 based Pocket CHIP. The work has been done by Florent Revest, a 19 years old intern at the company, who delivered a new sunxi-cedrus driver, a Video4Linux (V4L2) memory-to-memory decoder kernel driver, and corresponding VA-API backend, with the implementations currently available on Github here and there respectively. Currently only MPEG2 and MPEG4 are working, but adding other codecs such as H.264, and video encoding is possible […]

August 17, 2016August 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Allwinner R40 Quad Core ARM Processor, Successor of Allwinner A20, Supports SATA & Gigabit Ethernet

One of the most common complaints I get from readers when I publish news about new ARM processor is “Why didn’t they include SATA?”. So far Allwinner A20 is the only really low cost ARM processor that includes a SATA port, but it’s been released a few years, and its dual core Cortex A7 processor is getting old. We’ve been hearing rumors about an upgraded version for one or two years with Allwinner A40 or more recently Allwinner A20E, and finally the company has now published details about Allwinner R40 processor on their revamped website, which they claim to be the successor of Allwinner A20. Allwinner R40 key specifications: CPU – Quad-core ARM Cortex-A7 Processor GPU – Mali-400 MP2 GPU Memory I/F – 32-bit DDR3/DDR3L/LPDDR2/LPDDR3 Storage I/F – 8-bit NAND flash, SD3.0, eMMC 5.0, and 1x SATA Networking – 2x MAC: 1x EMAC (10/100M Ethernet), 1x GMAC (Gigabit Ethernet) Display […]

August 17, 2016August 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

Allwinner H5 is a Quad Core Cortex A53 Processor for 4K OTT TV Boxes

Last year, we found that Allwinner was preparing to launch Allwinner H64 and H5 quad and octa processors in their roadmap, but there have been some changes, and the compny seems to have dropped H64 name, and has now introduced Allwinner H5 quad core Cortex A53 processor designed for 4K TV boxes. Allwinner H5 main specifications: CPU – quad core Cortex A53 with NEON, FPU, 64KB I/D cache per core, and 512KB L2 cache 3G GPU – ARM Mali-450MP GPU with 4 pixel processor cores, and 2 geometry cores with support for OpenGL ES 2.0/1.1/1.1, OpenVG 1.1 and EGL 2D GPU (Graphics and Display Processor) – Dual display; Main display: 4 video layers, 12 graphics layers, 4 alpha blending channels; Auxiliary display: 4 video layers, 4 graphics layers, and 2 alpha blending channels Memory I/F – DDR3/3L SDRAM interface up to 32-bit data width Storage I/F – SPI NOR flash, […]

July 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Allwinner and Qualcomm Partner on Android and Windows 10 LTE Tablets

Allwinner, a leading tablet SoC vendor, and Qualcomm have decided to collaborate, and introduced three new LTE tablet reference designs based on Qualcomm Snapdragon 425, 430, and 435 available to Chinese OEMs, on top of Snapdragon 210, 212 and 410 designs released last year. The full technical technical details about the reference designs are only available to OEMS who signed an NDA, but the key specifications are as follows: SoC – Qualcomm Snapdragon 420, 430, 435 application processors System Memory – 2G DRAM Storage – 32GB internal memory Connectivity – CAT 6 LTE band The tablet will run Android, but Windows 10 is also being worked on. The agreement only covers tablets, so Allwinner will not be involved in LTE smartphones. Since both Allwinner and Qualcomm are silicon vendors, and competitors, you may wonder why they’ve partnered. Allwinner only provides WiFi and Bluetooth tablets with their own processors, so partnering with Qualcomm allows then to […]

May 31, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Allwinner Virtual Reality 2016 – 2017 Roadmap: H8vr, VR9 and VR10 Solutions

Virtual reality has gotten a lot of hype in the last year or so, and so far there’s basically three ways to implement virtual reality: smartphone + VR headset, all-in-one headset, and PC + headset. Currently the former is the most popular option as it’s much cheaper than the other two, while PC based virtual reality provides the best user experience, but it’s quite pricey. Allwinner is now at Computex 2016 promoting their virtual reality solutions, and they see smartphone based VR peak in 2018, PC based VR have a slower growth, with All-in-one VR becoming the dominant force in 2020 and beyond. So the company is focusing on all-in-one Android VR headsets, starting with H8vr board featuring Allwinner H8 octa-core processor with 2GB RAM and 16GB storage, and mainly targeting 4K virtual reality videos, since the performance of current mobile processors does not really provide a good experience for […]

May 13, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Allwinner News – Root Exploit in Linux and Fake Pine A64 Boards

There’s been a lot of buzz about a root exploit in Linux 3.4 kernel for Allwinner H3/H83T SoCs found by linux-sunxi & armbian developers in the last few days. Since the kernel for H3 / H83T is stuck to 3.4, and not always updated on the vast majority of hardware platforms, it’s quite likely there are many ways to breach into such systems, and even the majority of Android devices are not secure, not only the ones powered by Allwinner. So I did not really pay attention at first, but it went viral with stories reporting a hidden backdoor, and hitting to ill-intent. But is that really the case? That’s the code from github, now removed from the master branch, but still in A83T branch. It’s now super easy to gain root access by simply running one command which works for any users:

echo "rootmydevice" > /proc/sunxi_debug/sunxi_debug

1	echo "rootmydevice" > /proc/sunxi_debug/sunxi_debug

That’s obviously pretty bad, but is […]