Diskio Pi 13.3″ Touch Panel Display Kit is Designed for Raspberry Pi and ODROID Boards (Crowdfunding)

If your project requires a touch panel, there are plenty of solutions for Raspberry Pi and ODROID boards, with Hardkernel even selling ODROID-VU8C fully integrated touch panel display. However, most display kits require you to make your own case, and feature smaller displays with lower resolution. One developer has however come up with Diskio Pi, a higher-end touch panel kit with a 13.3″ Full HD display that works with the most popular Raspberry Pi and ODROID boards. Diskio Pi specifications: Display –  13.3″ AUO TFT IPS display with 1920×1080 resolution connected via a 30-pin eDP connector ; 330 cd/m2 brightness; 85° viewing angles in all directions. Touch panel – 10-point capacitive touch; G/G structure; USB 2.0 interface; ≥6H surface hardness. Main board: HDMI to eDP driver Stereo sound amplifier USB 2.0 hub with 3x ports:  2x external + 1x internal Battery balance circuit (3S/3S2P) Expansion – Various headers for prototyping […]

AAEON RICO-3288 Pico-ITX Board is Powered by Rockchip RK3288 Processor

When Rockchip RK3288 was launched in 2014 we got a few development boards like Firefly-RK3288, PopMetal, and Radxa Rock 2, and later on MiQi board. ASUS Tinker board made the processor popular again in 2017, and now AAEON, an industrial embedded company of ASUS group, has just unveiled RICO-3288 Pico-ITX Board based on the processor, and targeting OEMs instead of hobbyists & makers. RICO-3288 board specifications with RICO-3288F & RICO-3288V models adding wireless connectivity & battery options, as well as CAN and an extra RS-232 port for for the latter: SoC – Rockchip RK3288 quad core Cortex A17 processor @ 1.8GHz with ARM Mali-T760 GPU System Memory – 2GB DDR3L RAM Storage – 16GB eMMC flash, micro SD slot up to 64GB Video Output / Display IF mini HDMI 2.0 up to 4Kx2K @ 60Hz (Note that 4K @ 60 Hz may not work with all HDMI 2.0 TVs). eDP  […]

UP Core is a Low Cost & Compact Intel Maker Board Powered by an Atom x5-Z8350 SoC (Crowdfunding)

The UP community has already launched Intel Cherry Trail and Apollo Lake boards in the past with UP Board and UP2 (squared) boards, and they are now about to launch a cheaper and smaller board called UP Core powered by Intel Atom x5-Z8350 processor with to 1 to 4GB memory, up to 64GB eMMC flash, HDMI, USB 3.0, … and I/O expansion connectors. UP Core specifications: SoC – Intel Atom x5-Z8350 “Cherry Trail” quad core processor @ 1.44 GHz / 1.92 GHz (Burst frequency) with Intel HD 400 graphics @ 200 / 500 MHz System Memory –  1, 2 or 4 GB DDR3L-1600 (soldered on board) Storage – 16, 32, or 64 GB eMMC flash, SPI flash ROM Video Output / Display – HDMI 1.4 port, full eDP (embedded DisplayPort) connector Audio I/O – Via HDMI, and I2S Connectivity – 802.11 b/g/n WiFi  @ 2.4 GHz, Bluetooth 4.0 LE (AP614A) […]

UP Squared Apollo Lake Development Board Comes with Up to 8GB RAM, 128 GB Storage for 89 Euros and Up (Crowdfunding)

Up-Squared-Board

AAEON Introduced a Intel Atom X5 based Raspberry Pi-like development board named “UP Board” last year that sold for as low as 89 Euros via a Kickstarter campaign. The company is now back with the first Apollo Lake development board for makers I’ve seen so far, powered by either a dual core Celeron N3350 or a quad core Pentium N4200 processor, featuring an Altera MAX 10 FPGA, and called UP2 (“UP Squared”). There are six variants of UP Squared board sharing most of the same technical specifications: SoC Intel Celeron N3350 dual core “Apollo Lake” processor @ 1.1 GHz / 2.4 GHz with 12 EU Intel HD graphics 500 @ 200 MHz / 650 MHz (6W TDP) Intel Pentium N4200 quad core “Apollo Lake” processor @ 1.1 GHz / 2.5 GHz with 18 EU Intel HD graphics 505 @ 200 MHz / 750 MHz (6W TDP) FPGA – Altera Max […]

AAEON BOXER-6404 Bay Trail Embedded Computer Comes with 4 GbE Ports, 2 HDMI Outputs

AAEON has recently launched BOXER-6404 embedded box PC suitable to industrial application, powered by Intel Celeron J1900 “Bay Trail-D” or Celeron N2807 “Bay Trail-M” processor, with up to 8GB RAM, a CFast slot, four Gigabit Ethernet ports, and to HDMI outputs. BOXER-6404 mini PC specifications: SoC Intel Celeron J1900 quad core processor @ 2.0 /  2.42 GHz with Intel HD graphics (10W TDP) OR Intel Celeron N2807 dual core processor @ 1.58 / 2.16 GHz with Intel HD graphics (5W TDP) System Memory – 1x 204-pin DDR3L SODIMM slot for up to 4GB RAM with N2807), and up to 8GB RAM with J1900 Storage – CFast Slot Video and Audio Output – 1x or 2x HDMI ports Connectivity –  2x or 4x Gigabit Ethernet RJ45 ports USB – 2x USB 2.0 ports, 1x USB 3.0 port Serial – 1x RS232 DB9 port Expansion – 1x mini card with USB interface […]

Aaeon AIOT-X1000 Linux Gateway is Powered by an Intel Quark SoC

Intel Quark SoC for low power embedded devices has been seen on platforms designed by Intel themselves, such as Intel Galileo board or Edison wearable development kit, but I had not found Quark SoC in actual products until Aaeon announced their AIOT-X1000 gateway for the internet of things running Linux on an Intel Quark X1000 SoC, and working with a Cloud Service by Asus, Aaeon’s parent company. The solution targets manufacturing, transportation, and energy applications. Aaeon AIOT-X1000 specifications: Processor – Intel Quark X1000-series SoCs @ up to 400 MHz System Memory – 1GB DDR3 800/1066 SODIMM Storage – IDE port, and micro SD slot Connectivity – 10/100M Ethernet USB 4x USB2.0 ports Serial – 1x RS-232/422/485, 1x RS-422/485 Other I/Os — I2C, GPIO, JTAG Mini-PCIe card expansion – 1x full-size and  1x half-size, allowing for WiFi, 2G/3G/LTE cellular, Bluetooth, CAN bus, ZigBee, and RFID add-on boards Power – 5V or 9-24V DC input Dimensions – 146 x […]

Aaeon Announces CoMs, 3.5″ & mini ITX Embedded Boards Powered by Intel Bay Trail Processors

AAEON has announced the release three embedded boards and modules based on Intel Celeron J1900, N2930, N2807 and Atom E3800 series processors, which are all part of Intel’s low power Bay Trail family. EMB-BT1 is s mini-ITX board powered by Intel Atom 3825 or 3845, Gene-BT05 is a 3.5″ industrial board also based on Atom 3815/3815 or Celeron N2930 processors, and COM-BT is a series of COM Express type 6 computers-on-module. EMB-BT1 mini-ITX Board EMB-BT1 is a fanless board designed for digital signage, POS, Kiosk and networking applications among others, with the following key features: SoC – Intel Atom E3825 with 2 cores @ 1.33 GHz (TDP: 6 W) or Atom E3845 with 4 cores @ 1.91 GHz (TDP: 10W) System Memory – DDR3L-1066 MHz (3825) or DDR3L-1333 MHz (3845) Storage – Up to 2x SATA 6.0Gb/s, 2x SATA 3.0Gb/s Display – 1x VGA, 1x HDMI, 1x LVDS with dual […]

AAEON EMB-KB1 AMD G-Series SoC based mini-ITX Embedded Motherboard

AMD announced their G-Series SoC combining CPU, GPU and chipset in a single chip nearly a year ago, but AAEON EMB-KB1 is the first mini-ITX board I’ve ever heard of using these embedded SoCs. The board features first generation AMD SoCs in dual and quad core configuration, with up to 16GB RAM, up to 9 USB interfaces, 2 SATA III ports, and 2 USB 3.0 ports. AAEON EMB-KB1 hardware specifications: SoC GX-420CA quad-core CPU @2.0GHz with AMD Radeon HD 8400E GPU @600MHz – 25W TDP GX-217GA dual-core CPU @1.65GHz with AMD Radeon HD 8280E GPU @450MHz – 15W TDP System Memory – 2x SODIMM sockets for up to 16GB DDR3/DDR3L @ 1600MHz/1333MHz Storage – 2x SATA III (6.0Gb/s) I/O Chipset – Fintek F8186D-I Connectivity – 2x Gigabit Ethernet (Realtek 8111F) Video Output – 1x LVDS, 1x VGA, and 1x DVI up to 1080p or 1920×1200 Audio – Mic-in, line-out, and […]

Exit mobile version
EmbeddedTS embedded systems design