som News - Page 51 of 79 - CNX Software

November 22, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Open Source Hardware SpiderSoM System-on-Module Features Intel MAX 10 FPGA

When embedded systems companies offer a system-on-module (SoM) and a baseboard, the later is usually open source hardware with all design files provided so that customers can leverage the work for their own baseboard, but files for the SoM are normally not released to customers. Intel MAX 10 FPGA based Aries SpiderSoM and SpiderBase change that, as the company has decided to release both the module and carrier board KiCAD designs under a CERN OHL v1.2 license. SpiderSoM system-on-module specifications: FPGA – Intel MAX 10 FPGA in F256 package from 10M04DC to 10M50DA System Memory – Optional 128/256/512MB DDR3 DRAM for 10M 16/25/40/50 FPGAs Storage – Optional 4 MB SPI NOR, optional 4 GB eMMC flash 230-pin MxM2 edge connector with 178x FPGA GPIO pins, including 13 LVDS transmitters and 54 receivers Misc – RTC with battery backup, programmable clock generator and PLL, with optional external reference input Power Supply […]

November 16, 2018August 22, 2019 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Toradex Colibri iMX8X SoM Features NXP i.MX 8X Dual / Quad Arm Cortex-A35 Processor

Designed for infotainment and dashboard in automotive applications, industrial control, robotics, healthcare, mobile payments, handheld devices, and more, NXP i.MX 8X Arm Cortex-A35 processor was first spotted in 2016, before being formally announced in March 2017. But it took quite longer to see actual products launched, and several vendors announced i.MX 8X modules in the last week while NXP also released documentation. One of them is Toradex with their Colibri iMX8X system-on-module with up to 2GB LPDDR4 memory, 8GB flash, a built-in 802.11ac 2×2 MIMO WiFi + Bluetooth 5 module, dual channel LVDS, MIPI DSI display interface, a quad-lane MIPI CSI-2 camera interface, etc… Toradex Colibri iMX8X specifications: SoC (one of the following options) NXP i.MX 8QuadXPlus quad core Cortex-A35 processor @ up to 1.2GHz, Arm Cortex-M4 MCU @ up to 266MHz, HiFi4 DSP, Vivante GC7000Lite performance optimized GPU, 4K video support NXP i.MX 8DualXPlus dual core Cortex-A35 processor @ […]

October 12, 2018October 12, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Particle Unveils Mesh SoMs and IoT Developer Tools

Earlier this year, Particle unveiled three IoT development boards based on nRF52840 Bluetooth 5/802.15.4 WiSoC and supporting Particle Mesh, which interestingly is not based on Bluetooth Mesh or even Bluetooth, and instead relies on Thread specification/OpenThread implementation, and the 802.15.4 radio of the chip with Bluetooth only used for the initial setup stage. Particle announced the shipping date (October 2018 or… this month) for their Mesh boards pre-ordered in February, as well as three new products in a recent blog post. One of the products is a family of system-on-modules compatible with Particle Mesh, while the other two are related IoT developer tools. Particle Mesh SOMs The Particle Mesh SOMs will have similar names and features as corresponding Particle mesh developers kits such as Boron (NB-IoT / eMTC + BLE + Mesh) and Argon (ESP32 WiFi, BLE + Mesh), but with an edge connector and designed as enterprise-grade, production-scale version […]

September 13, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Howchip ExSOM-8895 Exynos 8895 Board is Designed for Android Development

Howchip has just launched a new Samsung based Android development kit -ExSOM-8895 DVK – powered by an Exynos 8895 system-on-module with 4GB DDR4, and UFS 2.1 storage. as well as featuring a carrier board exposing other interfaces such as mini DP, MIPI display and camera interfaces, Gigabit Ethernet, a UFS card reader, and so on. Having a Samsung Exynos 8895 board means we get a fairly powerful development platform, as the processor is found in Samsung Galaxy S8 smartphone released last year. ExSOM-8895 DVK specifications: SOC – Samsung Exynos 8895 octa-core processor with four custom ARMv8 “Mongoose M2+” cores, four Cortex-A53 cores (max freq: 2.1GHz), and an Arm Mali-G71 GPU System Memory – 4GB LPDDR4x 1866MHz (POP) Storage – UFS2.1 device (default), micro SD card (SD 3.0) slot, and UFS2.1 card slot, Video Output / Display I/F Mini Display Port 1.2 output 4-lane x 2-ch MIPI DSI connector for WQUXGA […]

September 9, 2018September 9, 2018 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Khadas is Working on more RK3399 / RK3399Pro Boards, Projector Development Kit, AR Kit

Shenzhen Wesion had already unveiled their Khadas Edge board that works both as a system-on-module and a standalone SBC thanks to an MXM3 connector on one side, and traditional HDMI and USB ports on the other. The Rockchip RK3399 board will be launched on Indiegogo a little later. But the company is working on a few more boards and development kits all based on Rockchip RK3399 or the upcoming RK3399Pro processor with neural processing unit (NPU) for AI workloads acceleration. First we have Khadas Edge-V, very similar to Khadas Edge but with a 40-pin IO header replacing the MXM3 connector, and following Khadas VIM form factor and ports, so for example we get an Ethernet port as well as an extra USB 3.0 port instead of USB 2.0 on Edge. As mentioned in Khadas Edge announcement, the company is also working on Khadas Captain carrier board with MXM3 socket. So we […]

August 27, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

UltraZed-EV Starter Kit Support Simultaneous 4K Encoding and Decoding with Xilinx Zynq UltraScale+ EV MPSoC

Xilinx unveiled Zynq UltraScale+ MPSoC‘s combining Arm Cortex A53/R5 cores with FPGA fabric back in 2015. and we started to see development boards and products based on the solution starting in 2017 with offerings such as AXIOM Board, TRENZ TE0808 SoM, or more recently 96Boards compliant Ultra96 development board. All last three boards have one thing in common: they all use an Zynq UltraScale+ GC MPSoC that adds a Mali-400MP2 GPU to CG MPSoC family. But there’s also a third EV family which standards for “Embedded Vision”, and adds support for 4K H.264 / H.265 hardware video codec capable of simultaneous encode and decode. The platform targets multimedia, automotive ADAS, surveillance, and other embedded vision applications. So far, I don’t think I had seen any boards based on Ultrascale+ EV MPSoC, but AVNet – following up on their UltraZed-EG starter kit – has now launched an UltraZed-EV starter kit powered […]

August 20, 2018March 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Forlinx OK5718-C Development Board is Powered by TI AM5718 Cortex-A15/M4 processor

Forlinx Embedded Technology (Forlinx) has just launched a new development board for indsutrial applications with audio and video processing requirements. OK5718-C development board features Texas Instruments AM5718 Sitara SoC with a single Arm Cortex-A15 core, two real-time Cortex-M4 cores, a dual PRU, and a TI C66x DSP core. OK5718-C development board consists of a carrier board and FET5718-C SoM with the following specifications: FET5718-C System-on-Module SoC – TI AM5718 Sitara Arm Cortex-A15 processor @ up to 1.5GHz, C66x DSP @ 750MHz, dual-core Arm Cortex-M4 @ 213MHz, dual core PRU @ 200MHz, PowerVR SGX544 3D GPU, Vivante GC320 2D GPU, IVA-HD video accelerator subsystem (H.264, MPEG4, MPEG2, VC1) System Memory – 1GB DDR3L Storage – 8GB eMMC flash Board-to-board connectors for interface with baseboard – 320–pin exposing USB 3.0, PCIe 3.0, HDMI 1.4a, LCD RGB, 10x UART, 1x QSPI, 2x CAN, 2x Gigabit Ethernet, etc… PMU – TI TPS659162RGZR Supply Voltage – […]

August 8, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Espressif Introduces ESP32-WROVER-B Module with 8MB RAM

ESP32 processor can support PSRAM, and so far I had seen boards or modules with up to 4MB RAM, but if you need more memory, Espressif Systems has now launched ESP32-WROVER-B module with 8MB SPI PSRAM. ESP32-WROVER-B module specifications: WiSoC – Espressif ESP32-D0WD with dual core processor up to 240 Mhz; 5x5mm package Connectivity 2.4GHz WiFi 802.11 b/g/n up to 150 Mbps Bluetooth 4.2 LE Two antenna designs: PCB antenna or IPEX connector External Memory – 8MB SPI Pseudo Static RAM (PSRAM) Storage – 4MB external SPI flash I/Os – Capacitive touch, SD card interface, Ethernet, SPI, UART, I2S, I2C, GPIOs, VP/VN, etc… Power Supply – 2.7 to 3.6V Dimensions – 31.4 x 18.0 x 3.3 mm Certifications – FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC ESP32-WROVER-B should be software compatible with other ESP32 modules. It works ESP-IDF framework based on FreeRTOS with LwIP ( light-weight Internet Protocol). TLS 1.2 hardware acceleration is built-in, and secure OTA […]