som News - Page 19 of 78 - CNX Software

August 20, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Raspberry Pi Zero 2 W board gets Raspberry Pi CM3 adapter

A couple of months ago, we wrote about the Raspberry Pi Compute Module 3E (CM3E) equipped with the Raspberry Pi RP3A0 SiP found in the Raspberry Pi Zero 2 W board. It looks like an OEM product from Raspberry Pi trading, and as such is close to impossible to purchase. But if somehow, you’d like to have the guts of the Pi Zero 2 W into CM3 module form factor, Waveshare has designed the Zero-to-CM3 adapter for the Raspberry Pi Zero 2 W that should be compatible with most carrier boards designed for Raspberry Pi CM3 or CM3+. As you can see, it is also using pogo pins to connect to the test points on the Raspberry Pi Zero 2 W board in order to route the USB, USB OTG, and SD card signals, so it will not work on older Pi Zero boards since the test points are in […]

August 16, 2022 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

NVIDIA Jetpack 5.0.2 release supports Ubuntu 20.04, Jetson AGX Orin

The NVIDIA Jetpack 5.0.2 production release is out with Ubuntu 20.04, the Jetson Linux 35.1 BSP 1 with Linux Kernel 5.10, an UEFI-based bootloader, support for Jetson AGX Orin module and developer kit, as new as updated packages such as CUDA 11.4, TensorRT 8.4.1, cuDNN 8.4.1. NVIDIA Jetson modules and developer kits are nice little pieces of hardware for AI workloads, but the associated NVIDIA Jetpack SDK was based on the older Ubuntu 18.04 which was not suitable for some projects. But the good news is that Ubuntu 20.04 was being worked on and initially available through the Jetpack 5.0.0/5.0.1 developer previews, and NVIDIA Jetpack 5.0.2 SDK is the first production release with support for Ubuntu 20.04. Besides the upgrade to Ubuntu 20.04, the Jetpack 5.0.2 SDK also adds support for both the Jetson AGX Orin Developer Kit and the newly-available Jetson AGX Orin 32 GB production module. It still […]

August 5, 2022August 5, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Renesas RZ/A3UL Cortex-A55 CPU runs RTOS for HMI with quick startup times

Renesas RZ/A3UL is a single-core Cortex-A55 processor clocked at up to 1 GHz designed to run FreeRTOS or Azure RTOS on high-definition (1280×800) HMI solutions requiring quick startup times such as industrial equipment, home appliances, office automation equipment, audio equipment, and POS terminals. The new RZ/A3UL processor family has the same peripheral functions and package pin assignments as the RZ/G2UL (Arm Cortex-A55/M33) and RZ/Five (RISC-V) families targeting Linux-based HMI applications. Renesas also designed a SMARC 2.1 compliant System-on-Module (SoM) based on the Renesas RZ/A3UL microprocessor to speed up time to market. Renesas RS/A3UL specifications: CPU – Single-core Arm Cortex-A55 processor @ up to 1.0 GHz with 32KB I-cache with parity, 32KB D-cache with ECC, 256KB L3 cache with ECC Internal Memory – 128KB SRAM with ECC Memory & Storage I/F 16-bit DDR4-1600 or DDR3L-1333 memory interfaces with in-line ECC; up to 4GB RAM Octal Peripheral Interface (OPI) for flash or […]

August 3, 2022October 13, 2022 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

NVIDIA Jetson AGX Orin 32GB production module is now available

NVIDIA Jetson AGX Orin 32GB production module is now in mass production and available after the 12-core Cortex-A78E system-on-module was first announced in November 2021, and the Jetson AGX Orin developer kit was launched last March for close to $2,000. Capable of up to 200 TOPS of AI inference performance, or up to 6 times faster than the Jetson AGX, the NVIDIA Jetson AGX Orin 32GB can be used for AI, IoT, embedded, and robotics deployments, and NVIDIA says nearly three dozen partners are offering commercially available products based on the new module. Here’s a reminder of NVIDIA Jetson AGX Orin 32GB specifications: CPU – 8-core Arm Cortex-A78AE v8.2 64-bit processor with 2MB L2 + 4MB L3 cache GPU / AI accelerators NVIDIA Ampere architecture with 1792 NVIDIA CUDA cores and 56 Tensor Cores @ 1 GHz DL Accelerator – 2x NVDLA v2.0 Vision Accelerator – PVA v2.0 (Programmable Vision […]

August 2, 2022August 2, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

reComputer J101/J202 carrier boards are designed for Jetson Nano/NX/TX2 NX SoM

Seeed Studio’s reComputer J101 & J202 are carrier boards with a similar form factor as the ones found in NVIDIA Jetson Nano and Jetson Xavier NX developer kits, but with a slightly different feature set. The reComputer J101 notably features different USB Type-A/Type-C ports, a microSD card, takes power from a USB Type-C port, and drops the DisplayPort connector, while the reComputer J201 board replaces the micro USB device port with a USB Type-C port, adds a CAN Bus interface, and switches to 12V power input instead of 19V. The table below summarizes the features and differences between the Jetson Nano devkit (B1), reComputer J101, Jetson Xavier NX devkit, and reComputer J202. Note the official Jetson board should also support production SoM with eMMC flash, but they do ship with a non-production SoM with a built-in MicroSD card socket instead. The carrier boards are so similar that if NVIDIA would […]

July 21, 2022 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

XRF16 Gen3 SOM features Xilinx Zynq UltraScale+ ZU49DR RFSoC with up to 6GHz bandwidth

We’ve written about Xilinx Zynq UltraScale+ MPSoCs that combine Arm Cortex-A53/R5 cores and Mali-400 GPU with Ultrascale FPGA fabric several times over the course of a few years. But AMD-Xilinx also offers the Zynq UltraScale+ RFSoC single-chip adaptable radio platforms that support up to 7.125GHz analog bandwidth. The topic came to my attention because of an upcoming ZU49DR SoM from iWave Systems that seems to be under development but also noticed Avnet had launched a solution last year with the XRF16 Gen3 SoM featuring the same third-generation Zynq Ultrascale+ ZU49DR RFSoC with 16 RF-ADC, 16 RF-DAC channels, and 6GHz RF bandwidth. Avnet XRF16 specifications: Main chip – Xilinx Zynq UltraScale+ Gen3 ZU49DR RFSoC with Quad-core Arm Cortex-A53 processing subsystem Dual-core Arm Cortex-R5F MPCore up to 533MHz 16x ADCs, 14-bit up to 2.5 GSPS 16x DACs, 14-bit up to 9.85 GSPS (10 GSPS Available) 1 GbE, PCIe Gen1/2, SATA, USB2/3 UltraScale+ […]

July 6, 2022July 7, 2022 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Firefly ITX-3568JQ – A Mini-ITX motherboard with Rockchip RK3568 CPU

Firefly ITX3588J mini-ITX motherboard with Rockchip RK3588 SoC now has a little sister/brother based on Rockchip RK3568 quad-core Cortex-A55 processor called ITX-3568JQ, and designed to power Arm PCs, cloud terminals, industrial controllers, edge computers, advanced NVR, NAS devices, and more. The motherboard supports up to 8GB RAM, 128GB eMMC flash, offers SATA storage, dual Gigabit Ethernet, WiFi 6, optional 4G or 5G cellular connectivity, can handle up to three independent displays, and offers plenty of I/O options including an RS232/RS485 DB9 connector and a PCIe slot. Firefly ITX-3568JQ specifications: SoC – Rockchip RK3568J quad-core Arm Cortex-A55 processor @ up to 2.0 GHz with Arm Mali-G52-2EE GPU with support for OpenGL ES 3.2, OpenCL 2.0, Vulkan 1.1, 1.0 TOPS NPU, 8MP ISP, 4Kp60 video decoding, 1080p60 H.265/H.264 video encoding System Memory – 1GB, 2GB, 4GB, or 8GB LPDDR4 Storage 8GB, 16GB, 32GB, 64GB, or 128GB eMMC flash 16MB SPI flash 1x […]

July 1, 2022 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

AEC-Q100 qualified module features Allwinner T507-H processor for automotive applications

We first wrote about Allwinner T507 when we covered a module and devkit from Forlinx, but now MYiR Tech has designed its own AEC-Q100 qualified system-on-module (MYC-YT507H) and the MYD-YT507H development board based Allwinner T507-H processor. MYC-YT507H – Allwinner T507-H SoM Specifications: SoC – Allwinner T507-H with a quad-core Arm Cortex-A53 processor @ 1.5GHz, Arm Mali-G31 MP2 GPU with support for OpenGL ES 3.2/2.0/1.0, Vulkan1.1, OpenCL 2.0; 4K60 H.265/VP9/AVS2 video decoder, 4K H.264/MJPEG video encoder System Memory – 1 or 2GB LPDDR4 Storage – 8GB eMMC flash, 32Kbit EEPROM (or is it 32KB/256Kbit – see block diagram below) 222x castellated holes with 1.0mm pitch for carrier board connection Networking – 1x RGMII and 1x RMII Video 1x HDMI 2.0a up to 4Kp60 2x single-channel LVDS or 1x dual-channel LVDS or 24-bit RGB up to 1080p60 1x TV CVBS output with PAL/NTSC Camera – 1x DVP digital camera, 1x MIPI CSI […]