som

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Linux 6.7 release – Main changes, Arm, RISC-V, and MIPS architectures

Linux 6.7 release – Main changes, Arm, RISC-V, and MIPS architectures

Linux 6.7 release

Linus Torvalds has just announced the release of Linux 6.7, following Linux 6.6 LTS a little over two months ago: So we had a little bit more going on last week compared to the holiday week before that, but certainly not enough to make me think we’d want to delay this any further. End result: 6.7 is (in number of commits: over 17k non-merge commits, with 1k+ merges) one of the largest kernel releases we’ve ever had, but the extra rc8 week was purely due to timing with the holidays, not about any difficulties with the larger release. The main changes this last week were a few DRM updates (mainly fixes for new hw enablement in this version – both amd and nouveau), some more bcachefs fixes (and bcachefs is obviously new to 6.7 and one of the reasons for the large number of commits), and then a few random […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Mixtile Core 3588E SoM review – Part 2: Ubuntu 22.04, hardware features, RK3588 AI samples, NVIDIA Jetson compatibility

Mixtile Core 3588E SoM review – Part 2: Ubuntu 22.04, hardware features, RK3588 AI samples, NVIDIA Jetson compatibility

Mixtile Core 3588E Ubuntu 22.04 review

We’ve already had a look at the Mixtile Core 3588E NVIDIA Jetson Nano/TX2 NX/Xavier NX/Orin Nano compatible Rockchip RK3588 SO-DIMM system-on-module in the first part of the review with an unboxing and first boot with an Ubuntu 22.04 OEM installation. I’ve now had more time to play with the devkit comprised of a Core 3588 module in 16GB/128GB configuration and a Leetop A206 carrier board with low-level features testing, some benchmarks, multimedia testing with 3D graphics acceleration and video playback, some AI tests using the built-in 6 TOPS NPU and the RKNPU2 toolkit, and finally I also tried out the system-on-module with the carrier board from an NVIDIA Jetson Nano developer kit. Ubuntu 22.04 System info We had already checked some of the system information in the first part of the Mixtile Core 3588E review, but here’s a reminder:

I also ran inxi to check a few more details. […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 19 Comments on Sipeed Longan Pi3H – A Raspberry Pi Zero-sized board with gigabit Ethernet, WiFi 6, HDMI, and USB ports

Sipeed Longan Pi3H – A Raspberry Pi Zero-sized board with gigabit Ethernet, WiFi 6, HDMI, and USB ports

Lichee Longan Pi3H

Sipeed Longan Pi3H is a Raspberry Pi Zero-sized single board computer (SBC) powered by an Allwinner H618 quad-core Cortex-A53 processor and equipped with full-size connectors namely an HDMI 2.0 video output, two USB 2.0 Type-A ports, and a gigabit Ethernet RJ45 jack. It also offers WiFi 6 and Bluetooth 5.4 connectivity, features the usual 40-pin GPIO header found in Pi Zero boards and relies on a USB OTG Type-C port for power. Its design is unusual for a board of that size, not only because of the full-size ports, but also because it’s comprised of a carrier board and a replaceable LM3H CPU module with the Allwinner H618 SoC, RAM, and eMMC flash. Sipeed Longan Pi3H specifications: SoC – Allwinner H618 CPU – Quad-core Arm Cortex-A53 processor @ up to 1.5GHz with 1MB L2 cache GPU – Arm Mali-G31 MP2 GPU with support for OpenGL ES 1.0/2.0/3.2, OpenCL 2.0, Vulkan […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Radxa CM3S Rockchip RK3566 SODIMM system-on-module supports up to 8GB RAM, 128GB flash, wireless module

Radxa CM3S Rockchip RK3566 SODIMM system-on-module supports up to 8GB RAM, 128GB flash, wireless module

Radxa CM3S Compute Module 3 SODIMM

Radxa CM3S (Compute Module 3 SODIMM), also called the ROCK3 Compute Module SODIMM, is a system-on-module with a 200-pin SO-DIMM edge connector powered by a Rockchip RK3566 processor with up to 8GB RAM, 128GB eMMC flash, and an optional wireless module with WiFi 4 and Bluetooth 4.2. It follows the company’s CM3 module with Raspberry Pi CM4 form factor based on the same Rockchip RK3566 SoC, but in a more compact SO-DIMM form factor with a 200-pin edge connector that’s compatible with the Raspberry Pi Compute Module 3/3+, but not compatible with NVIDIA’s Jetson Nano, Xavier NX, and Orin NX 260-pin SO-DIMM modules, and you’d need to wait for the upcoming Radxa NX5 instead… Radxa CM3S specifications can be found below along with the ones for the Radxa CM3 and Rockchip RK3568-based Radxa CM3I system-on-modules. Note that some of the specifications differ depending on where you look on the Radxa […]

Posted on by Tomisin Olujinmi - No Comments on Aper-Oculus is an open-source camera development board for AMD Xilinx’s Kria SoM (Crowdfunding)

Aper-Oculus is an open-source camera development board for AMD Xilinx’s Kria SoM (Crowdfunding)

Aper-Oculus Front

The Aper-Oculus board is an open-source hardware camera carrier board for the AMD Xilinx Kria system-on-modules aimed at high-speed computer vision applications. The carrier board is built around the Sony SLVS-EC (Scalable Low-Voltage Signaling with Embedded Clock), a high-speed interface standard that delivers high-resolution video output to the FPGA. It also features several connectivity options, including dual MIPI connectors, USB 3.0, DisplayPort, and SATA to accommodate the varying demands of AI and robotics projects. The Kria K24 and K26 SOMs are adaptive system-on-modules designed for edge and vision applications. These small modules are ruggedized and come with hardware acceleration enabled out-of-the-box. The Kria lineup also includes a series of starter kits, such as the KR260 Robotics Starter Kit, which are designed for early evaluation and development. Aper-Oculus specifications: Processor-Board Support – Compatible with AMD Xilinx Kria SOMs Video Interface – SLVS-EC for high-speed, high-quality video input Expansion – FMC connector […]

Posted on by Tomisin Olujinmi - 2 Comments on Pi-Cast is a portable KVM switch based on Raspberry Pi CM4 (Crowdfunding)

Pi-Cast is a portable KVM switch based on Raspberry Pi CM4 (Crowdfunding)

Pi-Cast with HAT

The Pi-Cast KVM is a compact, open-source KVM (Keyboard, Video, Mouse) over IP device based on the Raspberry Pi CM4. It is powered by PiKVM, an open-source IP-KVM solution, and allows you to control and manage other devices remotely regardless of the operating system or even if one isn’t installed. The Pi-Cast KVM is capable of controlling any device with HDMI and USB ports. It works for low-level access and enables BIOS and UEFI configuration without an operating system installed. You can turn off and start the target system, as well as check for low-level hardware problems, all from a web browser. The Pi-Cast KVM is similar to the PiKVM v3 but is built around the Raspberry Pi CM4 (like the PiKVM v4) instead of being a HAT for Raspberry Pi SBC. The company behind this device has compared the Pi-Cast with market alternatives such as PiKVM v4 Plus and […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Cytron IRIV PiControl is an Industry 4.0 controller based on Raspberry Pi CM4 module

Cytron IRIV PiControl is an Industry 4.0 controller based on Raspberry Pi CM4 module

IRIV PiControl IR4.0 CM4 Industrial controller

Cytron IRIV PiControl is described as an Industrial Revolution 4.0 (or Industry 4.0) controller that is powered by a Raspberry Pi Compute Module 4 (CM4) and joins the likes of OnLogic Factor 201, Modberry 500 CM4, and Pigeon RB700 among others. The DIN Rail mountable Industry 4.0 controller from Cytron currently ships with a Raspberry CM4 Wireless (2GB/16GB or 4GB/32GB) and offers several isolated interfaces such as DI and DO up to 50V, four analog inputs, and RS232 and RS485 serial interfaces via terminal blocks, IRIV PiControl specifications: SoM – Raspberry Pi CM4 with Broadcom BCM2711 quad-core Arm Cortex-A72 processor @ up to 1.5 GHz, up to 8GB LPDDR4 RAM, up to 32GB eMMC flash Additional storage – M.2 socket for NVMe SSD (See Expansion section) Video Output – HDMI port up to 4Kp60 Networking 1x Gigabit Ethernet port 1x 10/100M Ethernet port WiFi 5 and Bluetooth 5.0 on Raspberry […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Mixtile Core 3588E development kit review – Part 1: Unboxing and first boot

Mixtile Core 3588E development kit review – Part 1: Unboxing and first boot

Mixtile Core 3588E development kit review

Mixtile Core 3588E is a Rockchip RK3588 SO-DIMM system-on-module with up to 32GB LPDDR4 and 256GB eMMC flash that follows NVIDIA Jetson Nano, TX2 NX, Xavier NX, and Orin Nano form factor and should work with any board made for Jetson SO-DIMM modules. We first covered the module last April, but Mixtile is now shipping their Rockchip RK3588 module and sent us a development kit with the Mixtile Core 3588 SoM fitted with a fansink and a carrier board that looks quite similar to the NVIDIA Jetson Nano developer kit we reviewed a few years ago, although its design is closer to the new B01 developer kit as we’ll see below.  We’ll start the review with an unboxing and first boot, before testing it in more detail with Ubuntu 22.04 in the second part of the review. Mixtile Core 3588E development kit unboxing We received the development kit fully preassembled. […]

UP 7000 x86 SBC