Single Board Computer News - Page 97 of 103 - CNX Software

June 22, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Inforce 6309 Snapdragon 410E micro SBC is Now Selling for $89 (Promo)

With its Snapdragon 410E processor, Inforce 6309 single board computer is similar to Qualcomm DragonBoard 410c board, except it adds a Gigabit Ethernet port with optional PoE/RS484 add-on, switches HDMI with micro HDMI, replaces Low and High speed connectors with LVDS, dual MIPI-DSI, and 26-pin IO onnector, as well as offering an extended temperature range. It’s also designed for production, rather than just development, but it normally costs $126 instead of $75 for Qualcomm’s 96Boards compliant board. Inforce is now bringing that price down with a summer promotion allowing you to buy the board for $89 using summer coupon, excluding potential taxes, and shipping. I’ll reproduce the specifications below for reference: SoC- Qualcomm Snapdragon 410/410E (APQ8016/APQ8016E) quad-core ARM CortexA53 @ 1.2 GHz with Adreno 306 GPU and Hexagon QDSP6 @ 700 MHz System Memory – 1GB LPDDR3 @ 533MHz, single-channel 32-bit (4.2GBps) Storage – 8GB eMMC flash (eMCP package with […]

April 12, 2017April 12, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

MYIR MYS-6ULX is a $25 Single Board Computer based on NXP i.MX 6ULL/6UL Processor for IoT and Industry 4.0

MYIR Tech has released MYS-6ULX single board computer based on NXP i.MX 6ULL/6UL Cortex-A7 processor designed for either Industry 4.0 with MYS-6ULX-IND model, or the Internet of Things for MYS-6ULX-IOT. Both boards include 256MB DDR3 SDRAM, 256MB NAND flash, USB, USB, Ethernet, LCD interfaces and more, in a compact 70 x 55mm form factor. Both boards have very similar specifications. Features MYS-6ULX-IND MYS-6ULX-IOT SoC NXP i.MX 6UltraLite (MCIMX6G2CVM05AA) with an ARM Cortex A7 processor @ up to 696 MHz and 2D graphics accelerator NXP i.MX 6ULL (MCIMX6Y2DVM05AA) with an ARM Cortex A7 processor @ 528 MHz and 2D graphics accelerator DDR3 256MB (support up to 2GB) NAND Flash 256MB (support 512MB/1GB) eMMC DNP (Do Not Populate – Reserved design for optional 4GB flash) Ethernet 10/100Mbps USB 1x USB Host, 1x micro USB OTG Micro SD Card 1x Micro SD card slot Buttons 1x Reset Button, 1x User Button LED 1x Power Indicator, 2x […]

March 21, 2017March 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

AAEON RICO-3288 Pico-ITX Board is Powered by Rockchip RK3288 Processor

When Rockchip RK3288 was launched in 2014 we got a few development boards like Firefly-RK3288, PopMetal, and Radxa Rock 2, and later on MiQi board. ASUS Tinker board made the processor popular again in 2017, and now AAEON, an industrial embedded company of ASUS group, has just unveiled RICO-3288 Pico-ITX Board based on the processor, and targeting OEMs instead of hobbyists & makers. RICO-3288 board specifications with RICO-3288F & RICO-3288V models adding wireless connectivity & battery options, as well as CAN and an extra RS-232 port for for the latter: SoC – Rockchip RK3288 quad core Cortex A17 processor @ 1.8GHz with ARM Mali-T760 GPU System Memory – 2GB DDR3L RAM Storage – 16GB eMMC flash, micro SD slot up to 64GB Video Output / Display IF mini HDMI 2.0 up to 4Kx2K @ 60Hz (Note that 4K @ 60 Hz may not work with all HDMI 2.0 TVs). eDP […]

March 10, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

F&S Elektronik armStone A53SD Pico-ITX SBC Features Qualcomm Snapdragon 410E Processor

F&S Elektronik Systeme GmbH will showcase their solutions at Embedded World 2017 next week, including their latest ARM Cortex A53 modules and boards based on NXP QorIQ LS1012A, and Qualcomm Snapdragon 410E processors. Today, I’ll write about the later with the company’s armStone A53SD pico-ITX single board computer equipped with up to 32GB flash and 8GB memory. armStone A53SD board specifications: Processor – Qualcomm Snapdragon 410E quad core ARM Cortex-A53 processor @ up to 1.2 GHz with Adreno GPU System Memory – Up to 8GB LPDDR3 RAM Storage – Up to 32GB eMMC flash, 1x micro SD card slot Display – 24-bit LVDS, DVI up to 720p, I2C for touch controller Audio – Line In/Out/Mic via header Connectivity – 1x 10/100M Ethernet, WiFi IEEE 802.11a/b/g/n, Bluetooth 2.1+EDR/4.1 LE USB – 3x USB 2.0 host ports, 1x USB 2.0 device port Camera – MIPI-CSI connector Expansion – Unpopulated 66-pin header with […]

February 20, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Qualcomm Snapdragon 820 SBCs: Inforce 6640, iWave iW-RainboW-G25S, and DragonBoard 820c

We’ve already covered Qualcomm Snapdragon 820 system-on-modules such as Intrinsyc Open-Q 820 and Inforce 6601, which can be used with baseboards that are suitable for development, but so far I had not seen a single board computer (SBC) powered by the processor optimized for mass production and suitable for integration into products. Bu this is about to change, as three Snapdragon 820 SBCs are now (or soon will be) available with Inforce Computing 6640, iWave iW-RainboW-G25S, and DragonBoard 820c. Inforce 6640 SBC Inforce Computing 6640 Single Board Computer specifications: SoC – Qualcomm Snapdragon 820 quad core Kryo processor with 2x cores @ up to 2.2GHz, 2x cores @ up to 1.6GHz, Adreno 530 GPU, Hexagon 680 DSP System Memory – 4GB LPDDR4 Storage – Up to 64GB UFS 2.0 flash, microSD slot Video Output / Display Interface – 2x 4-lane MIPI-DSI DPHY 1.2 , 1x HDMI 2.0 interface for touch […]

December 27, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

ADLE3800SEC is a Compact Intel Bay Trail-I Board with Dual Gigabit Ethernet, HDMI or DisplayPort, and More

ADL Embedded Solutions, a US company specializing in… embedded solutions, has unveiled ADLE3800SEC embedded single board computer (SBC) optimized for size, weight and power (SWAP), based on an Intel Atom E3800 Bay Trail-I processor with HDMI, SATA dual Gigabit Ethernet, etc… The board is the first one part of the company’s Edge-Connect architecture defined a 75x75mm form factor with an edge connector exposing additional I/Os for breakout boards. ADLE3800SEC board specifications: SoC Intel Atom E3827 dual core Bay Trail-I processor @ up to 1.75GHz with 1MB cache, Intel Gen7 graphics (8W TDP) OR Intel Atom E3845 quad core Bay Trail-I processor@ up to 1.91GHz with 2MB cache, Intel Gen 7 Graphics (10W TDP) System Memory – Up to 4GB DDR3-1333MHz (soldered on-board) Storage – 1x M.2 socket(Key B, 2242); 1x SATA 2.0 (6GB/s) via edge connector Video Output 1x HDMI up to 1920 x 1200 or 1x DisplayPort up to […]

October 20, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

TOPEET iTOP4412 Exynos 4412 Boards Support Up to 3 LCD Displays, GPS, 3G, 4x UARTs, etc…

Beijing TOPEET Electronics iTOP4412 board based on Samsung Exynos 4412 quad core Cortex A9 processor, and a developer has very recently committed patchsets to mainline Linux kernel to add support for the board. Exynos 4412 is not quite the latest and most powerful processor, but the board is still interesting due to mainline Linux support, and some hardware features like interfaces for up to 3 LCD displays plus HDMI, two DB9 serial interfaces, two camera interfaces, and more. iTOP4412 is comprised of the company’s Exynos 4412 SoM and a baseboard with the following specifications: SoC – Samsung Exynos 4412 quad-core Cortex A9 clocked at up to 1.4GHz-1.6GHz + ARM Mali-400MP4 GPU @ 440MHz System Memory – 1 GB dual channel DDR3 Storage – 4GB eMMC flash and microSD slot Video Output / Display IF – HDMI 1.4 port, 2x LVDS interfaces (including one via an HDMI connector?), 1x LCD RGB […]

September 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

MinnowBoard Turbot SBC Gets a Quad Core Atom E3845 Processor, Better Ethernet, and a Fansink

MinnowBoard Turbot open source hardware SBC was released in 2015 with an Intel Atom E3826 dual core Bay Trail-I processor, 2GB RAM, SATA and Gigabit Ethernet support, and a new version – MinnowBoard Turbot Quad – with a more powerful quad core processor, an heatsink and fan, and better Ethernet connectivity will be launched in December. MinnowBoard Turbot Quad “MBT-4210” board specifications: SoC – Intel Atom E3845 quad core Bay Trail-I processor @ 1.92 GHz with Intel HD graphics @ 542 / 792 MHz (10W TDP) System Memory – 2GB DDR3L 1067 MT/s (Soldered) Storage – 1x SATA2 3Gbs, 1x micro SD card slot, , 8 MB SPI Flash for firmware (Tianocore UEFI, Coreboot, SeaBIOS) Video & Audio Output – 1x micro HDMI connector Connectivity – 10/100/1000M Ethernet RJ-45 connector (Intel i211 instead of Realtek NIC on first board) USB – 1x USB 3.0 host, 1x USB 2.0 host Debugging […]