Single Board Computer News - Page 89 of 95 - CNX Software

February 20, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Qualcomm Snapdragon 820 SBCs: Inforce 6640, iWave iW-RainboW-G25S, and DragonBoard 820c

We’ve already covered Qualcomm Snapdragon 820 system-on-modules such as Intrinsyc Open-Q 820 and Inforce 6601, which can be used with baseboards that are suitable for development, but so far I had not seen a single board computer (SBC) powered by the processor optimized for mass production and suitable for integration into products. Bu this is about to change, as three Snapdragon 820 SBCs are now (or soon will be) available with Inforce Computing 6640, iWave iW-RainboW-G25S, and DragonBoard 820c. Inforce 6640 SBC Inforce Computing 6640 Single Board Computer specifications: SoC – Qualcomm Snapdragon 820 quad core Kryo processor with 2x cores @ up to 2.2GHz, 2x cores @ up to 1.6GHz, Adreno 530 GPU, Hexagon 680 DSP System Memory – 4GB LPDDR4 Storage – Up to 64GB UFS 2.0 flash, microSD slot Video Output / Display Interface – 2x 4-lane MIPI-DSI DPHY 1.2 , 1x HDMI 2.0 interface for touch […]

December 27, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

ADLE3800SEC is a Compact Intel Bay Trail-I Board with Dual Gigabit Ethernet, HDMI or DisplayPort, and More

ADL Embedded Solutions, a US company specializing in… embedded solutions, has unveiled ADLE3800SEC embedded single board computer (SBC) optimized for size, weight and power (SWAP), based on an Intel Atom E3800 Bay Trail-I processor with HDMI, SATA dual Gigabit Ethernet, etc… The board is the first one part of the company’s Edge-Connect architecture defined a 75x75mm form factor with an edge connector exposing additional I/Os for breakout boards. ADLE3800SEC board specifications: SoC Intel Atom E3827 dual core Bay Trail-I processor @ up to 1.75GHz with 1MB cache, Intel Gen7 graphics (8W TDP) OR Intel Atom E3845 quad core Bay Trail-I processor@ up to 1.91GHz with 2MB cache, Intel Gen 7 Graphics (10W TDP) System Memory – Up to 4GB DDR3-1333MHz (soldered on-board) Storage – 1x M.2 socket(Key B, 2242); 1x SATA 2.0 (6GB/s) via edge connector Video Output 1x HDMI up to 1920 x 1200 or 1x DisplayPort up to […]

October 20, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

TOPEET iTOP4412 Exynos 4412 Boards Support Up to 3 LCD Displays, GPS, 3G, 4x UARTs, etc…

Beijing TOPEET Electronics iTOP4412 board based on Samsung Exynos 4412 quad core Cortex A9 processor, and a developer has very recently committed patchsets to mainline Linux kernel to add support for the board. Exynos 4412 is not quite the latest and most powerful processor, but the board is still interesting due to mainline Linux support, and some hardware features like interfaces for up to 3 LCD displays plus HDMI, two DB9 serial interfaces, two camera interfaces, and more. iTOP4412 is comprised of the company’s Exynos 4412 SoM and a baseboard with the following specifications: SoC – Samsung Exynos 4412 quad-core Cortex A9 clocked at up to 1.4GHz-1.6GHz + ARM Mali-400MP4 GPU @ 440MHz System Memory – 1 GB dual channel DDR3 Storage – 4GB eMMC flash and microSD slot Video Output / Display IF – HDMI 1.4 port, 2x LVDS interfaces (including one via an HDMI connector?), 1x LCD RGB […]

September 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

MinnowBoard Turbot SBC Gets a Quad Core Atom E3845 Processor, Better Ethernet, and a Fansink

MinnowBoard Turbot open source hardware SBC was released in 2015 with an Intel Atom E3826 dual core Bay Trail-I processor, 2GB RAM, SATA and Gigabit Ethernet support, and a new version – MinnowBoard Turbot Quad – with a more powerful quad core processor, an heatsink and fan, and better Ethernet connectivity will be launched in December. MinnowBoard Turbot Quad “MBT-4210” board specifications: SoC – Intel Atom E3845 quad core Bay Trail-I processor @ 1.92 GHz with Intel HD graphics @ 542 / 792 MHz (10W TDP) System Memory – 2GB DDR3L 1067 MT/s (Soldered) Storage – 1x SATA2 3Gbs, 1x micro SD card slot, , 8 MB SPI Flash for firmware (Tianocore UEFI, Coreboot, SeaBIOS) Video & Audio Output – 1x micro HDMI connector Connectivity – 10/100/1000M Ethernet RJ-45 connector (Intel i211 instead of Realtek NIC on first board) USB – 1x USB 3.0 host, 1x USB 2.0 host Debugging […]

June 2, 2016June 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Axiomtek Braswell pico-ITX Board Fearures Pentium N3710 or Celeron N3060 Processor

Axiomtek has just announced PICO300 pico-ITX board, an update of their PICO842 board replacing Bay Trail processors by Braswell ones. The board supports either Intel Pentium N3710 or Celeron N3060 processors with up to 8 GB memory via a SO-DIMM socket, and includes HDMI or VGA, SATA and Gigabit Ethernet interfaces among others. Axiomtek PICO300 pico-ITX motherboard specifications: SoC Intel Celeron N3060 dual core processor @ 1.6 / 2.48 GHz with 12 EU Intel HD Graphics 400 @ up to 600 MHz (6W TDP) OR Intel Pentium N3710 quad core processor @ 1.6 / 2.56 GHz with 16 EU Intel HD Graphics 405 @ up to 700 MHz (6W TDP) System Memory – 1x 204-pin SO-DIMM DDR3L-1600 up to 8GB Storage – 1x SATA-600, 1x mSATA (shared with PCIe mini card) Video Output – 1x LVDS, and 1x HDMI or 1x VGA Audio – MIC-in/Line-out; Realtek ACL662 audio codec Connectivity […]

April 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Boardcon’s Rockchip RK3288 Single Board Computer Runs Android 4.4/5.1, Supports 3G, GPS, 5 Display Interfaces and More

Rockchip RK3288 is back in the news this month, and after the announced of MiQi low cost board a few days ago, an high-end Rockchip RK3288 SBC has come to market with Boardcon EM3288 comprise of MINI3288 CPU module, and a features-packed baseboard with multiple ports and connectivity options, including SATA and a 3G modem. EM3288 board specifications: SoC – Rockchip RK3288 quad core ARM Cortex A17 processor up to 1.8 GHz with Mali-T764 GPU System Memory – 2G DDR3 Storage – 8 GB eMMC flash, SATA, and micro SD slot Video I/O HDMI 2.0 up to 3840×2160@60p (provided your TV/monitor support YUV444) VGA 1x 26-pin MIPI connector, 1x 40-pin LVDS (multiplexed with VGA), 1x 40-pin TTL LCD connector Audio Output / Input – HDMI, Line IN and OUT 3.5mm jacks, and built-in MIC Connectivity Gigabit Ethernet Optional 8021.11b/g/n and Bluetooth4.0 via Ampak AP6212 module Optional 3G via ZTE MF210 […]

March 28, 2016March 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

SolidRun Introduces Intel Braswell MicroSoMs, and SolidPC Q4 Carrier Board

SolidRun has been making ARM based MicroSoMs – tiny system-on-module – for a while, and integrated them in many of their boards such as HummindBoard Edge or ClearFog Pro, and now the company has packed Intel Braswell processors into 52.8 x 40mm MicroSoMs that can be plugged into SolidPC Q4 carrier board. Two Braswell MicroSoM module have been designed so far: SoM IB8000 and SoM IB3710, which beside having different SoCs, and memory options share most of the same specifications: SoC SoM IB8000 – Intel Atom x5-E8000 quad core processor @ 1.04 / 2.0 GHz with 12EU Intel HD graphics @ 320/600 MHz (5W TDP) SoM IB3710 – Intel Pentium N3710 quad core processor @ 1.6 / 2.56 GHz with 16EU Intel HD graphics 405 @ 400/700 MHz (6W TDP) System Memory SoM IB8000 – 1GB (single channel), 2GB, 4GB or 8GB (dual channel) SoM IB3710 – Up to 8GB (default size) […]

February 23, 2016May 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Boundary Devices Nitrogen7 Single Board Computer is Powered by NXP i.MX7 Processor

While several system-on-modules based on Freescale/NXP i.MX7 processor have been announced such as Compulab CL-SOM-iMX7, or TechNexion PICO-IMX7-EMMC, I had not seen many single board computers or development boards based on the new processor, apart from Freescale i.MX7 96Boards by Arrow Electronics which was scheduled for Q4 2015, but has yet to launch. Boundary Devices Nitrogen7 board is another option that’s available now (in limited quantities) with NXP i.MX7 Cortex A7+Cortex M4 processor, 1GB RAM, 4 to 64GB eMMC, wired and wireless connectivity, and expansion headers. Nitrogen7 board specifications: SoC – Freescale i.MX7 single or dual ARM Cortex-A7 processor @ up to 1GHz + ARM Cortex-M4 MCU + 2D graphics engine System Memory – 1GB DDR3L Storage – 4GB eMMC flash (expandable to 64GB), 2MB Serial NOR Flash, SD card slot Connectivity – 1x 10/100/1Gb Ethernet, WiFi 802.11 a/b/g/n, Bluetooth 4.1 (TiWi-BLE combo module) Display – 24-bit RGB (via expansion […]