Single Board Computer News - Page 85 of 95 - CNX Software

July 13, 2018July 13, 2018 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Renegade Elite (ROC-RK3399-PC) RK3399 Single Board Computer Launched for $99 on Indiegogo

Libre Computer and Firefly Team previously collaborated on Renegade (ROC-RK3328-CC) board powered by a Rockchip RK3328 quad core Cortex A53 processor and mostly following Raspberry Pi 3 form factor. We already knew both companies worked again on another Rockchip RK3399 single board computer, and were expected to launch it in July via a crowdfunding campaign. The good news is that Libre Computer has just launched Renegade Elite (aka ROC-RK3399-PC) SBC on Indiegogo. Renegade Elite board specifications: SoC – Rockchip RK3399 hexa core processor with 2x Arm Cortex-A72 @ up to 2.0 GHz + 4 Arm Cortex-A53, Arm Mali-T860MP4 with OpenGL ES 1.1 / 1.2 / 2.0 / 3.1 / 3.2 and OpenCL 1.2 support System Memory – 4GB LPDDR4 SDRAM Storage – eMMC 5.x interface for storage modules up to 128GB, micro SD card slot, and 128Mbit SPI NOR flash Video Output / Display I/F HDMI 2.0 connector Embedded DisplayPort (eDP) […]

July 7, 2018 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

GIGABYTE Apollo Lake SBC Upgraded to a Quad Core Processor

GIGABYTE introduced GA-SBCAP3350 Apollo Lake SBC powered by an Intel Celeron N3350 dual core processor las year. The board came without any soldered memory nor storage, instead relying on a SO-DIMM slot, two SATA connectors, and/or an mSATA socket. The company has now launched a second Apollo Lake single board computer – GA-SBCAP3450 – with very similar specifications, except the processor has been upgraded to a Celeron N3450 quad core processor. GIGABYTE GA-SBCAP3450 SBC specifications: SoC – Intel Celeron N3450 quad core processor @ 1.1 GHz/ 2.2 GHz with 12 EU Intel HD graphics 500 @ 200 MHz / 700 MHz (6W TDP) System Memory – 1x SO-DIMM socket for up to 8GB DDR3L 1333/1600/1866 MHz Storage – 2x SATA 6Gb/s connectors, 1x MSATA connector (MSATA_MPCIE2), 2x 64Mbit flash for AMI UEFI BIOS supporting PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Video Output 1x HDMI 1.4 […]

July 6, 2018July 6, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Sapphire FS-FP5V Embedded Board Features AMD Ryzen Embedded V1000 Processor, Four DisplayPort Outputs

We’ve previously covered UDOO Bolt AMD Ryzen Embedded V1000 development board that’s offered for $229 and up on Kickstarter, and targets the maker community. Another board with Ryzen Embedded processor is SAPPHIRE FS-FP5V 5″ board with support for up to four independent displays, and suitable solution for digital signage, POS terminal, electronic gaming machines, medical imaging, thin clients, and so on. Sapphire FS-FP5V specifications: SoC AMD Ryzen Embedded V1202B 2 cores / 4 threads @ 2 GHz / 3.6 GHz (Turbo) with Radeon Vega 3 @ 1100 MHz; 12-25W TDP AMD Ryzen Embedded V1605B 4 cores / 8 threads @ 2.06 GHz / 3.6 GHz (Turbo) with Radeon Vega 8 GPU @ 1100 MHz; 12-25W AMD Ryzen Embedded V1756B 4 cores / 8 threads @ 3.25 GHz / 3.6 GHz with Radeon Vega 8 GPU @ 1100 MHz; 35-54W TDP AMD Ryzen Embedded V1807B 4 cores / 8 threads @ 3.35 […]

June 10, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

IC Nexus SBC3100 Rockchip RK3399 SBC Supports Variable DC Input (9 to 36V)

Earlier this year, we got flooded with announcements for new Rockchip RK3399 SBC’s or development boards with products like RockPro64 or Orange Pi RK3399. Here’s another one launched last year by Taiwan based IC Nexus, which showcased their SBC3100 board at Computex 2018 this past week. IC Nexus SBC3100 SBC specifications: SoC – Rockchip RK3399 hexa core big.LITTLE processor with two Arm Cortex-A72 cores up to 2.0GHz, four Cortex-A53 cores up to 1.5GHz, and a Mali-T864 GPU with OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC System Memory – 1 GB, 2GB or 4GB RAM Storage – 8 or 16GB eMMC flash, 1x microSD slot Display Interfaces / Video Output HDMI 2.0 up to 4K @ 60Hz DisplayPort 1.2 up to 4K @ 60 Hz via USB Type-C connector 1x eDP 1.3 up to 2560 x 1600 @ 60 Hz MIPI-DSI up to 2560 x 1600 @ 60 Hz I2C capacitive […]

June 1, 2018June 4, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

UDOO BOLT AMD Ryzen Embedded V1000 SBC Goes for $229 and Up (Crowdfunding)

While Intel has been outing low cost and low power processors with less than 10W TDP over the years with their Bay Trail, Cherry Trail, Braswell, Apollo Lake, and now Gemini Lake processors, AMD has not really ventured into the low power space, and the latest announcements about 10-12W processors was for their Embedded G-Series J Family, which I have not seen in many products. More recently, the company introduced Ryzen Embedded V1000 family of processors with 4 to 8 Zen cores, 4K support, 10 GbE interface, and more with a TDP of 12 to 25W for Ryzen Embedded V1202B & V1605B dual / quad core processors. The latest x86 UDOO board – dubbed UDOO BOLT – will be one of the rare AMD development boards available on the market with pricing starting at $229. Two versions of the board will be available: UDOO BOLT v3 with Ryzen Embedded V1202B, […]

May 29, 2018 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Orange Pi 3G-IoT SBC Launched for $24.90

We had two Arm Linux SBCs with cellular connectivity from Shenzhen Xunlong so far: Orange Pi 2G-IoT for 2G connectivity, and Orange Pi 4G-IoT with LTE support in Asia and Europe. But what if you needed 3G connectivity, and did not want to spend $45 on the 4G board? There was no option until today, but the company has just launched Orange Pi 3G-IoT with WCDMA (UMTS), TD-CDMA and CDMA2000 support. Orange Pi 3G-IoT-B board specifications: SoC – MediaTek MT6572 dual core Cortex A7 processor @ up to 1.2 GHz with Arm Mali-400 GPU System Memory – 512MB DDR2 Storage – 4GB eMMC flash, micro SD slot Display I/F – FPC connector for FWVGA display (854×480) Camera I/F – MIPI connector Audio – 3.5mm audio jack, built-in microphone, 2x solder pads for optional speakers Connectivity Cellular Nano SIM card slot 2G GSM – 850/900/1800/1900 MHz 3G WCDMA -(B1/B2/B5/B8), TD-CDMA, CDMA2000 […]

May 23, 2018May 24, 2018 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

FriendlyELEC Launches a Rockchip RK3399 SBC for $129. Meet NanoPC-T4

Earlier this year, we have a number of SBCs based on Rockchip RK3399 hexa-core processor from Orange Pi RK3399 to ODROID-N1, or Pine64 RockPro64 boards. FriendlyELEC has joined the fray with their NanoPC-T4, which they claim is the the smallest RK3399 based high-performance ARM board. The SBC comes with 4GB RAM, 16GB eMMC flash, dual-band WiFi module and an M.2 PCIe interface with NVME SSD support. NanoPC-T4 board specifications: SoC – Rockchip RK3399 hexa core big.LITTLE processor with two Arm Cortex-A72 cores up to 2.0GHz, four Cortex-A53 cores up to 1.5GHz, and a Mali-T864 GPU withsupport for OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC System Memory – 4GB dual channel LPDDR3 Storage – 16GB eMMC 5.1 flash, M.2 slot for NVMe SSD, 1x microSD slot Display / Video Output HDMI 2.0a up to 4K @ 60Hz withHDCP 1.4/2.2 DisplayPort 1.2 Alt Mode on USB Type-C LCD I/F – 1x eDP […]

May 11, 2018May 12, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Newport GW6400/GW6404 Arm SBC Comes with 5 Gigabit Ethernet Ports, 2 SFP Fiber Ports, and 4 mPCIe Sockets

Gateworks introduced their Newport SBC family based on Cavium Octeon TX Dual/Quad Core Arm processors at the end of last year, and the company has now announced the availability of the higher end models of their networking single board computers with Newport GW6400 & GW6404, which provide four mPCIe sockets for expansion, five Gigabit Ethernet ports, and in the case of GW6404, two optional SFP cages for fiber connections. GW6400 / GW6404 specifications: SoC GW6400 – Cavium OcteonTX CN8120 dual core processor up to 800MHz GW6404 – Cavium OcteonTX CN8130 quad core processor up to 1.5 GHz System Memory GW6400 – 1 GB DDR4 DRAM GW6404 – 2 GB DDR4 DRAM Storage – 8 GB eMMC Flash , micro SD card slot, serial configuration EEPROM Connectivity 5x GbE Ethernet ports GW6404 – Up to 2x optional SFP fiber ports (redirect of one or two of the RJ45 ports to SFP […]