Single Board Computer News - Page 78 of 98 - CNX Software

November 10, 2019November 12, 2019 by Jean-Luc Aufranc (CNXSoft) - 283 Comments

Giveaway Week – NanoPi M4V2 SBC & Metal Case Kit

Let’s finish giveaway week 2019 on a high with FriendlyELEC NanoPi M4V2 single board computer, and its metal case kit. The board features a Rockchip RK3399 processor with 4GB LPDDR4 RAM, and the metal case kit allows the addition of an NVMe M.2 SSD as well. I tested the mini PC with FriendlyCore Desktop based on Ubuntu 18.04, since at the time, Armbian was still not working with the updated board equipped with LPDDR4 memory, and Android requires an eMMC flash module which was not part of the kits I received. NanoPi M4V2 performed fairly well in the case, but the fan is quite noisy, and somehow the RAM bandwidth was almost half of the one in the earlier NanoPi M4 board with DDR3 memory, which is the opposite one would expect. Probably related to some software tweaks as explained in the comments section of the review. I received two […]

November 4, 2019February 16, 2020 by Stephen Vicinanza - 1 Comment

Digilent Offers 2 Zynq-Based Linux Development Boards Supporting SYZYGY Expansion

Digilent Announces SYZYGY high-speed SBCs Digilent has announced two new SBCs that are ultra-high-speed and built to be more modular than its other boards. The company, which has a great deal of experience in Pmod lower speed FPGA standards has now entered the open-source, SYZYGY high-speed standards with its Eclypse Z7 and the Genesys ZU development SBCs. Background on the Digilent Zybo FPGA SoC SBC We reported on the Zybo development board FPGA SoC from Digilent and that seems to have lead to the latest format for the Eclypse Z7. Zmod There is also a release planned for the new Zmod modules, built to work with both the Eclypse Z7 and the Genesys ZU as SYZYGY compliant expansion modules. Opal Kelly and Zmod expansion The Zmods are Opal Kelly module standard, called SYZYGY, first seen in the Opal Kelly SYZYGY Brain-1 SBC. The standard was developed to jump the gap […]

October 23, 2019November 24, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Khadas VIM3L SBC Review with Android 9 Firmware

Khadas VIM3L is the first and so far only Amlogic S905D3 SBC on the market, so I first ran some benchmarks and checked system info. But it is also designed to be an HTPC, I’ll continue the review with some 4K video and audio playback testing, some gaming, and I/O benchmarks. Khadas VIM3L Unboxing As you may remember (or not), VIM3L ships either as a bare board pre-loaded with Android 9 or as an HTPC kit with the board running CoreELEC. I’ve received the bare board which also comes with two WiFi antennas. It can do much more than a simple TV box however, since it also comes with an M.2 NVMe socket (extra adapter board required), and sockets with MIPI DSI + touchscreen, and MIPI CSI camera. It’s one of the few boards with a low profile Ethernet connector, so if you ever wanted to build a farm of […]

October 22, 2019October 22, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

VersaLogic Harrier Credit-Card Sized Computer is Powered by Intel Atom E3930/E3950 Processor

Back in 2016, we wrote about VersaLogic Osprey industrial and military-grade computer based on Intel Atom Bay Trail processor, and slightly larger than a credit card. The company is now back with an upgrade with many of the same features, and the exact form factor, but VersaLogic Harrier comes with a choice of more powerful dual-core and quad-core E39xx Apollo Lake processors. VersaLogic Harrier (VL-EPU-4011) board specifications: SoC – Intel Atom E3930 dual-core @ 1.3 GHz or E3950 quad-core @ 1.6 GHz Apollo Lake processor with Intel HD Graphics 505 System Memory – 2GB or 8GB ECC-DDR3L (soldered) Storage 8GB or 32GB eMMC flash MicroSD slot SATA 2.0 port with latching connector mSATA via mini-PCIe slot Display Single-channel 18/24-bit LVDS up to 1024×768 @ 60Hz 1x mini-DisplayPort++ with HDMI and audio support up to 4096×2160 Connectivity – 2x Gigabit Ethernet ports with latching connector, network boot option on one of […]

October 17, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Forlinx NXP LS1043A & LS1046A Networking SBC’s Support 10Gbps Ethernet

NXP LS1043A quad-core Cortex-A53 communication processor was introduced in 2014, while NXP LS1046A quad-core Cortex-A72 SoC was launched about 18 months later. Both are designed for networking equipment such as CPE (Customer Premise Equipment), routers, NAS, gateways, as well as single board computers and include one or two 10 GbE interfaces. Forlinx Embedded has decided to leverage those two processors in their OK1043A-C and OK1046A industrial-grade single board computers designed for networking applications. Both boards are comprised of the same baseboard and only differ by their COM-Express Mini Type 10 module which comes with the processor, memory, and flash storage. Specifications: COM Express Mini System-on-Module (one or the other) FET1046A-C NXP LS1046A SoM CPU – NXP LS1046A quad-core Cortex-A72 processor @ up to 1.8GHz System Memory – 2GB DDR4 RAM Storage – 8GB eMMC flash + 16MB QSPI NOR Flash Voltage Input – 12V Temperature Range – -40℃ to +75℃ […]

October 10, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Novasom M7+ SBC Adds FFC HDMI Connector, USB & RS-485 Headers, Improves on Raspberry Pi 3 SW Compatibility

We previously wrote about Novasom M7 Rockchip RK3328 SBC being promoted as a drop-in replacement for Raspberry Pi 3 in industrial projects. That’s despite the different port arrangement, and instead, the company bases the claim on the availability of the 40-pin header, mounting holes matching RPI 3 board design, as well as software compatibility thanks to a library that allows customers to re-use the code written for Raspberry Pi boards. Based on feedback from customers, the company has made some changes to their design and launched Novasom M7+ SBC, and made several improvement to the software to be even more compatible with Raspberry Pi 3 board. Specifically there are five changes: Ability to power the board via the USB type-A port (5V) as an alternative to the 12V power barrel jack Stronger Backlight Driver for display up to 6A @5V) t FFC cable for HDMI output – The dimension of […]

October 10, 2019October 10, 2019 by Jean-Luc Aufranc (CNXSoft) - 31 Comments

Rock Pi S mini SBC Now Available for $15 with 512MB RAM, 512MB SD NAND Flash, WiFi & Bluetooth

Rock Pi S is a tiny single board computer powered by Rockchip RK3308 quad-core Cortex-A35 processor coupled with up to 512MB RAM, up to 1GB SD NAND flash, as well as a USB port, Fast Ethernet & optional WiFi & Bluetooth connectivity which was announced to sell for as low as $9.90 with 256MB RAM, 256MB flash and no wireless module. Seeed Studio has now started to take pre-orders for Rock Pi S with the board selling for $14.90 with 512 MB RAM, 512MB SD NAND flash, WiFi & Bluetooth. Shipping is scheduled to start on October 15th. [Update: Seeed Studio has also listed the 256MB RAM version of the board for $9.90] Rock Pi S specifications as currently sold on Seeed Studio: SoC – Rockchip RK3308 quad-core Arm Cortex-A35 processor @ up to 1.3 GHz with built-in VAD (Voice Activity Detector) System Memory – 512MB RAM Storage – MicroSD […]

October 8, 2019 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

NanoPI NEO2 Black Allwinner H5 SBC Adds an eMMC flash Module, Up to 1GB RAM

NanoPi NEO2, now called NanoPi NEO2 LTS, is a great little Allwinner H5 SBC designed for server/headless applications with Ethernet & USB ports, as well as I/O headers. FriendlyELEC is now about to launch a new variant called NanoPi NEO2 Black with the same form factor and Allwinenr H5 64-bit Arm SoC, but adding an eMMC flash module, supporting up to 1GB RAM, modifications to the I/O headers, and featuring a black PCB instead of the blue PCB found in NEO2-LTS. NanoPi NEO2 Black SBC specifications with changes in bold or stricken-through: SoC – Allwinner H5 quad-core Cortex A53 processor with an ARM Mali-450MP GPU System Memory – 512 MB or 1GB DDR3 Storage – MicroSD card slot, eMMC flash module connector Connectivity – Gigabit Ethernet (via RTL8211E-VB-CG chip) USB – 1x USB 2.0 host port, 1x micro USB OTG port, 2x 1x USB via headers Expansion headers 10-pin header […]