Single Board Computer News - Page 42 of 103 - CNX Software

September 13, 2022October 4, 2022 by Jean-Luc Aufranc (CNXSoft) - 39 Comments

Khadas Edge2 ultra thin SBC is powered by Rockchip RK3588S processor

As noted in the Khadas VIM1S announcement, the company is also preparing to launch the Khadas Edge2 single board computer with a Rockchip RK3588S octa-core Cortex-A76/A55 processor and a thickness of just 5.7mm (before a low-profile heatsink is installed). The new board follows a similar form factor as the original Khadas Edge board powered by a Rockchip RK3399 processor, except the edge connector is gone, so it can’t be used as a system-on-module anymore, but remains the thinnest and one of the most powerful Arm SBCs so far. Khadas Edge2 Basic/Pro specifications: SoC – Rockchip RK3588S CPU – Octa-core processor with four Cortex-A76 cores @ 2.25 GHz, four Cortex-A55 cores @ 1.8 GHz GPU – Arm Mali G610MC4 GPU AI accelerator – 6TOPS NPU VPU 8Kp60 10-bit H.265 decoder, 4Kp60 AV1 video decoder 8Kp30 H.264/H.265 video encoder MCU – STMicro STM32G031K6 Arm Cortex-M0+ microcontroller @ 64 Mhz for power management […]

September 9, 2022September 20, 2022 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Khadas VIM1S low-profile SBC features Amlogic S905Y4 quad-core Cortex-A35 SoC

Khadas VIM1S is an upcoming low-profile single board computer powered by an Amlogic S905Y4 quad-core Cortex-A35 processor that’s meant to provide an upgrade to the Amlogic S905X-powered Khadas VIM SBC introduced in 2016, and since then renamed to Khadas VIM1. Khadas has been teasing two new SBCs: the low-end Khadas VIM1S with S905Y4 SoC, and the most powerful Khadas Edge2 board equipped with a Rockchip RK3588S octa-core Cortex-A76/A55 processor. I have received both as you can clearly see from the photo above :), but I’m only allowed to write about information available publicly at this time, so today I’ll introduce the Khadas VIM1S which looks just like the VIM1 board. Khadas VIM1S specifications with highlights in bold showing the differences against the VIM1 Pro model: SoC – Amlogic S905Y4 quad-core Arm Cortex-A35 @ up to 2.0 GHz (real frequency) with Arm Mali-G31 MP2 GPU @ up to 850 MHz MCU – […]

September 9, 2022September 8, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

GENE-ADP6 – An 3.5-inch SBC with Intel 12th Gen Alder Lake-P processor, DDR5 RAM

AAEON GENE-ADP6 is a 3.5-inch SBC equipped with a choice of Intel 12th Gen Alder Lake-P (and Alder Lake-U) processors and the first from the company to support DDR5 memory, of which up to 64GB can be installed through two SO-DIMM sockets. The single board computer also supports SATA and NVMe storage, up to two 8K displays (and up to four independent displays), 2.5GbE networking, USB 3.2 ports, four RS232/RS422/RS485 interfaces, and further expansion through three M.2 sockets for wireless connectivity (WiFi, 5Gm, 4G LTE…) as well as the already mentioned NVMe SSD storage. GENE-ADP6 SBC specifications: Intel Alder Lake-P SoC (one or the other) Core i7-1270PE 12-core/16-thread processor @ 3.30GHz / 4.50GHz (Turbo) with 96EU Intel Xe graphics – PBP: 28W, up to 64W MTP Core i7-1265UE 10-core/12-thread processor @ 3.50GHz / 4.70GHz (Turbo) with 96EU Intel Xe graphics – PBP: 15W, up 55W MTP Core i5-1250PE 12-core/16-thread processor […]

September 5, 2022September 5, 2022 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Banana Pi BPI-R3 WiFi 6 router board features MediaTek Filogic 830/MT7986 SoC

I first noticed the MediaTek MT7986 WiFi router processor in Linux 5.17 changelog. MT7986 is the codename for MediaTek Filogic 830 quad-core Cortex-A53 processor designed for Wi-Fi 6/6E routers with up to 6 Gbps bandwidth, and two 2.5Gbps Ethernet interfaces. Banana Pi BPI-R3 is a router board based on Filogic 830/MT7986A that offers an upgrade to the company’s Banana Pi BPI-R2 board powered by a MediaTek MT7623A quad-core Cortex-A7 processor or even the Banana Pi BPI-R64 board based on a MediaTek MT7622 dual-core Arm Cortex-A53 SoC. Banana Pi BPI-R3 specifications: SoC – MediaTek MT7986A (Filogic 830) quad-core Arm Cortex A53 processor with hardware acceleration engines for Wi-Fi offloading and networking System Memory – 2GB DDR RAM Storage – 8GB eMMC flash, MicroSD card socket, support for M.2 NVMe SSD Networking 2x 2.5GbE SFP cages, 5x Gigabit Ethernet ports (1x WAN + 4x LAN) via MT7531AE 7-port switch WiFi 6 4×4 […]

August 30, 2022October 21, 2022 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

MangoPi MQ Quad SBC – Allwinner H616 meets Raspberry Pi Zero W form factor

MangoPi MQ Quad is an Allwinner H616 quad-core Arm Cortex-A53 SBC following Raspberry Pi Zero W form factor, and the company’s earlier MangoPi MQ Pro RISC-V SBC featuring the Allwinner D1 processor. The MangoPi MQ Quad also comes with 1GB RAM, a mini HDMI output, two USB Type-C ports, WiFI 4 and Bluetooth connectivity, a microSD card, as well a 40-pin Raspberry Pi-compatible GPIO header and an FPC connector with USB, Ethernet, and more GPIOs for expansion. MangoPi MQ Quad specifications: SoC – Allwinner H616 quad-core Cortex-A53 @ 1.5GHz with Mali-G31 MP2 GPU with OpenGL 3.2, Vulkan 1.1, OpenCL 2.0 API support System Memory – 1GB DDR3L Storage – MicroSD card slot, a footprint for SPI flash (on the bottom of the board) Video Output – Mini HDMI 2.0 port up to 4Kp60 Connectivity – 802.11 b/g/n WiFi 4 and Bluetooth 4.2 via RTL8723DS; ceramic and u.FL antennas included USB […]

August 26, 2022August 27, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

WAFER-TGL-U 3.5-inch Tiger Lake SBC offers 3x 2.5GbE ports, SATA, 4x display interfaces

IEI’s WAFER-TGL-U is a 3.5-inch SBC based on a choice of Intel Tiger Lake UP3 processors with up to 32GB RAM, SATA storage, three 2.5 Gbps Ethernet ports, four display interfaces including HDMI, DisplayPort, and the company’s custom iDPM 3040 slot for eDP/LVDS/VGA, as well as four USB 3.2 ports. The board also comes with M.2 sockets to add 4G LTE or 5G cellular connectivity, a few RS232/RS422/RS485 ports, and IEI says it is ideal for space-constrained applications such as AGV (Automated Guided Vehicle), AMR (Autonomous Mobile Robot), and small cabinets in factories. WAFER-TGL-U specifications: Tiger Lake UP3 SoC (One or the other) Intel Core i7-1185G7E quad-core processor up to 4.4GHz 12MB cache, TDP=28/15/12W Intel Core i5-1145G7E quad-core processor up to 4.1GHz, 8MB Cache, TDP=28/15/12W Intel Core i3-1115G4E dual-core processor up to 3.9GHz, dual-core, 6M Cache, TDP=28/15/12W Intel Celeron 6305E (up to 1.8GHz, dual-core, 4M Cache, TDP=15W) System Memory – […]

August 25, 2022 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

UP Squared 2 is a compact Elkhart Lake SBC with Celeron N6210 or Pentium J6426 processor

UP Squared 2 is a compact single board computer powered by either an Intel Celeron N6210 or Pentium J6426 “Elkhart Lake” processor with up to 16GB RAM, 64GB eMMC flash, 4K capable HDMI and DisplayPort video outputs, two Gigabit Ethernet ports, and more. Slightly smaller than two business cards, the UP Squared 2 is an upgrade of the UP Squared SBC introduced in 2016 with Intel Celeron N3350 or Pentium N4200 “Apollo Lake” processor. The new board offers virtually the same features, except the two HDMI ports, have been replaced by one HDMI port, and one DisplayPort connector, the mini PCIe slot is gone in favor of an M.2 NVMe socket, the Altera FPGA has been removed, and the new system provides overall better specifications in terms of CPU/GPU performance. UP Squared V2 specifications: Elkhart Lake SoC (one or the other) Intel Celeron N6210 dual-core processor up to 2.6 GHz […]

August 23, 2022August 25, 2022 by Jean-Luc Aufranc (CNXSoft) - 47 Comments

StarFive VisionFive 2 quad-core RISC-V SBC launched for $46 and up (Crowdfunding)

As expected, StarFive has officially unveiled the JH7110 quad-core RISC-V processor with 3D GPU and the VisionFive 2 SBC. I just did not expect the company to also launch a Kickstarter campaign for the board, and the version with 2GB RAM can be had for just about $46 for “early birds”. The VisionFive 2 ships with up to 8GB RAM, HDMI 2.0 and MIPI DSI display interfaces, dual Gigabit Ethernet, four USB 3.0/2.0 ports, a QSPI flash for the bootloader, as well as support for eMMC flash module, M.2 NVMe SSD, and microSD card storage. VisionFive 2 specifications: SoC – StarFive JH7110 quad-core 64-bit RISC-V (SiFive U74 – RV64GC) processor @ up to 1.5 GHz with Imagination BXE-4-32 GPU supporting OpenGL ES 3.2, OpenCL 1.2, Vulkan 1.2 4Kp30 H.265/H.264 video decoder 1080p30 H.265 video encoder System Memory – 2GB, 4GB, or 8GB LPDDR4 Storage – MicroSD card slot, eMMC flash […]