pico-itx News - Page 6 of 8 - CNX Software

March 21, 2017March 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

AAEON RICO-3288 Pico-ITX Board is Powered by Rockchip RK3288 Processor

When Rockchip RK3288 was launched in 2014 we got a few development boards like Firefly-RK3288, PopMetal, and Radxa Rock 2, and later on MiQi board. ASUS Tinker board made the processor popular again in 2017, and now AAEON, an industrial embedded company of ASUS group, has just unveiled RICO-3288 Pico-ITX Board based on the processor, and targeting OEMs instead of hobbyists & makers. RICO-3288 board specifications with RICO-3288F & RICO-3288V models adding wireless connectivity & battery options, as well as CAN and an extra RS-232 port for for the latter: SoC – Rockchip RK3288 quad core Cortex A17 processor @ 1.8GHz with ARM Mali-T760 GPU System Memory – 2GB DDR3L RAM Storage – 16GB eMMC flash, micro SD slot up to 64GB Video Output / Display IF mini HDMI 2.0 up to 4Kx2K @ 60Hz (Note that 4K @ 60 Hz may not work with all HDMI 2.0 TVs). eDP […]

March 10, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

F&S Elektronik armStone A53SD Pico-ITX SBC Features Qualcomm Snapdragon 410E Processor

F&S Elektronik Systeme GmbH will showcase their solutions at Embedded World 2017 next week, including their latest ARM Cortex A53 modules and boards based on NXP QorIQ LS1012A, and Qualcomm Snapdragon 410E processors. Today, I’ll write about the later with the company’s armStone A53SD pico-ITX single board computer equipped with up to 32GB flash and 8GB memory. armStone A53SD board specifications: Processor – Qualcomm Snapdragon 410E quad core ARM Cortex-A53 processor @ up to 1.2 GHz with Adreno GPU System Memory – Up to 8GB LPDDR3 RAM Storage – Up to 32GB eMMC flash, 1x micro SD card slot Display – 24-bit LVDS, DVI up to 720p, I2C for touch controller Audio – Line In/Out/Mic via header Connectivity – 1x 10/100M Ethernet, WiFi IEEE 802.11a/b/g/n, Bluetooth 2.1+EDR/4.1 LE USB – 3x USB 2.0 host ports, 1x USB 2.0 device port Camera – MIPI-CSI connector Expansion – Unpopulated 66-pin header with […]

March 9, 2017March 9, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Axiomtek Introduces PICO312 Fanless Apollo Lake Pico-ITX SBC

Axiomtek has recently introduce PICO312, a fanless pico-ITX single board computer powered by either Intel Pentium N4200 quad core processor or Celeron dual code N3350 processor N3350 part of “Apollo Lake” family. The board is equipped with a SO-DIMM socket supporting up to 8GB RAM, LVDS, VGA or HDMI output, and working within -20°C to +60°C without the need for a fan, but just a heat spreader with heatsink. Axiomek PICO312 Apollo Lake Pico-ITX board specifications: SoC – Intel Pentium N4200 quad core procesoor @ up to or Celeron N3350 processor @ up to with respectively 18EU or 12 EU Intel HD Graphics Gen 9. System Memory – 1x DDR3L-1867 SO-DIMM supporting up to 8GB Storage – 1x SATA-600 port, 1x mSATA via mini PCIe slot (both on the back of the board) Video Output / Display IF 1x LVDS; 18/24-bit single/dual channel 1x HDMI (N4200 model) or 1x VGA […]

June 2, 2016June 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Axiomtek Braswell pico-ITX Board Fearures Pentium N3710 or Celeron N3060 Processor

Axiomtek has just announced PICO300 pico-ITX board, an update of their PICO842 board replacing Bay Trail processors by Braswell ones. The board supports either Intel Pentium N3710 or Celeron N3060 processors with up to 8 GB memory via a SO-DIMM socket, and includes HDMI or VGA, SATA and Gigabit Ethernet interfaces among others. Axiomtek PICO300 pico-ITX motherboard specifications: SoC Intel Celeron N3060 dual core processor @ 1.6 / 2.48 GHz with 12 EU Intel HD Graphics 400 @ up to 600 MHz (6W TDP) OR Intel Pentium N3710 quad core processor @ 1.6 / 2.56 GHz with 16 EU Intel HD Graphics 405 @ up to 700 MHz (6W TDP) System Memory – 1x 204-pin SO-DIMM DDR3L-1600 up to 8GB Storage – 1x SATA-600, 1x mSATA (shared with PCIe mini card) Video Output – 1x LVDS, and 1x HDMI or 1x VGA Audio – MIC-in/Line-out; Realtek ACL662 audio codec Connectivity […]

October 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Axiomtek PICO842 Fanless Bay Trail Pico-ITX Motherboard Includes a SO-DIMM Socket and SATA Ports

Axiomtek PICO842 is a fanless Pico-ITX motherboard that features Intel Celeron J1900 quad core processor or Celeron N2807 dual core processor with up to 8GB DDR3L, and aimed at IoT & medical applications, automation, and embedded systems with wide temperature range requirements. Axiomtek PICO842 specifications: SoC Intel Celeron J1900 quad core processor up to 2.42 GHz OR Intel Celeron N2807 dual core processor up to 2.16 GHz System Memory – 1x DDR3L-1066/1333 SO-DIMM up to 8GB for J1900, and 4GB for N2807 Storage – 1x SATA-300, 1x mSATA Video Output – 1x 18/24-bit single/dual channel LVDS, and 1x HDMI or 1x VGA Audio – HD Codec audio (Realtek ALC662); MIC-in/Line-out Connectivity – Gigabit Ethernet (Intel i211AT) USB – 4x USB 2.0 host port Serial – 2x COM ports supporting RS-232, RS-422, and RS-485. Expansion – mini PCI Express (shared with mSATA support) Power Supply – 12V DC power jack. Battery […]

February 6, 2015February 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Data Modul eDM-pITX-BT pico-ITX Boards Powered by Intel Bay Trail Processors

Data Modul has introduced industrial pico-ITX boards based on low power Intel Atom or Celeron Bay Trail processors, that include a Gigabit Ethernet port, LVDS, HDMI or DisplayPort video output, a SATA interface and up to 4 GB RAM. eDN-pITX-BT boards specifications: SoC: Intel Atom E3815 single core processor @ 1.46GHz with HD graphics – 5W TDP Intel Celeron J1900 quad core processor @ 2.0 GHz (up to 2.42GHz) with HD graphics – 10W TDP System Memory – 2GB or 4GB on-board DDR3L (1600 MT/s) Storage – SATA 2.0 (3GB/s), mSATA via mini-PCIe Video Output / Display I/F – DisplayPort up to 2560 x 1600, optional HDMI (TBC), dual-channel 24-bit LVDS up to 1920 x 1200, backlight control. Dual independent display support. Audio – Realtek ALC888S HDA audio codec – S/PDIF, front speaker, and microphone via headers. Connectivity – 1x Gigabit Ethernet USB – 3x USB 2.0; 1x USB 3.0 […]

May 9, 2014May 9, 2014 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Snapdragon 600 based IFC6410 Development Board is Available for $75 For a Limited Time

Despite their popularity with tablets and smartphones, I don’t see much developer community around Qualcomm Snapdragon processor, and only a few low cost development boards. One of them is Inforce Computing IF6410 pico-ITX board powered by Qualcomm Snapdragon 600 (APQ8064) quad core processor with 2GB RAM, 4GB eMMC flash, Gb Ethernet, Wi-Fi, Bluetooth, SATA, micro HDMI and LVDS video outputs, etc.., that normally sells for just $149. But the company is having a promotion for $75 with the coupon code “makerfaire” until May 18, or until the 500 units they’ve reserved are sold out. Shipping is not included in the price, and you’ll have to add about $50 for Fedex delivery (It may be cheaper in the US) for a total of about $125, which still probably makes it the cheapest “Cortex A15 class” board that you can get. The board appears to only officially support Android, and if you […]

April 22, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Phytec phyBOARD WEGA Industrial Pico-ITX SBC Features Texas Instruments Sitara AM335x SoCs

Phytec has recently announced phyBOARD WEGA board powered by Texas Instruments AM335x Sitara ARM Processors via their phyCORE-AM335x SoM, which comes with up to 1GB DDR3 SDRAM, and up to 2GB NAND Flash. This single board computer targets industrial HMI (Human Machine Interface) and is suitable for various automation and display applications. PhyBOARD WEGA specifications: SoM – phyCORE-AM335x with: SoC – Texas Instruments Sitara AM355x ARM Cortex-A8 processor @ up to 1GHz, with PowerVR SGX530 GPU System Memory – 256 MB DDR3 RAM (Max: 1GB) Storage – 128 MB NAND Flash (Max: 2GB), optional 8 MB NOR Flash, 4KB EEPROM External Storage – micro SD card slot Connectivity – 2 x 10/100 Ethernet USB – 1 x USB Host, 1 x USB OTG Display I/F – 24bpp TTL Communication Interfaces – 6 x UART, 3 x I2C, 2 x SPI, 1 x CAN Expansion Connectors – 1x ADC(12Bit, 8Channel), GPIOs, […]