lpwan News - Page 15 of 23 - CNX Software

March 20, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

RAK Wireless Launches RAK7258 Indoor LoRa Gateway for $149

RAK Wireless has just launched a new indoor LoRa gateway with their RAK7258 model featuring Semtech SX1301 8-channel digital baseband chip. The OpenWrt gateway supports Ethernet with PoE, 2.4GHz WiFi, optional NB-IoT, LTE Cat M, LTE 4G module, and is fully compatible with LoRaWAN 1.0.2. The gateway supports all main LoRa regions including EU433, CN470, EU868, US915, and AS923. RAK7258 gateway specifications: SoC – MediaTek MT7628 MIPS 24KEc processor @ 580 MHz System Memory – 128MB DDR2 RAM Storage – eMMC flash, microSD card slot Connectivity 10/100 Ethernet with PoE 802.11 b/g/n WiFi 4 with internal antenna LoRa via RAK833 mini PCIe card + RP-SMA antenna Cellular – Extended NB-IoT, Cat M, LTE 4G, supported by default; nano SIM card slot USB – 1x USB 2.0 host port Console – RJ45 RS-232 port Misc – 6x status LED Power Supply – 12V/2A (default) or 42-57V DC PoE Dimensions – 180 […]

February 14, 2019June 11, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

The Things Industries Announces $69 Indoor Multi-Channel LoRaWAN Gateway

If you ever see a cheap LoRaWAN gateway, chances are that it is a single channel gateway such as Dragino LoRa gateways that can be purchased for as low as $56. Those will work for your private network, but if others people try to use your gateway, some LoRa nodes will fail to connect. So what you really need is a multi-channel gateway for instance to connect it to The Things Networks. That would be $200 (and up), thank you very much. The IoT can only succeed on a large scale if costs are low enough, so Things Industries decided to design, and has now unveiled a low cost indoor multi-channel LoRaWAN gateway. Meet The Things Indoor Gateway. The Things Indoor Gateway specifications: SoC – Espressif System ESP8266 WiSoC Wireless Connectivity 802.11 b/g/n WiFi 4 via ESP8266 + PCB antenna LoRaWAN via Semtech 1308 chipset with Support for 868 MHz […]

January 22, 2019April 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

RAK Wireless Introduces DIY Cellular LoRa Gateways, Raspberry Pi & 96Boards Compatible LoRa Modules

Raspberry Pi 3B+ professional LoRa gateway

RAK Wireless already has a decent offering of LoRa gateways and modules, but the company has been working on two new LoRa gateways, one Enterprise grade model – RAK7249 gateway – based on fully custom hardware, and the other – Pilot Gateway Pro RAK7243 – features a Raspberry Pi 3B+ board with Cellular & GPS connectivity on top of a LoRa radio. RAK Wireless will also introduce three RAK2245/RAK2248 LoRa concentrator modules that can easily be used with boards following Raspberry Pi, or 96Boards IoT edition form factors. RAK7249 DIY Enterprise LoRa Gateway Specifications: Main Board WiFi Module – RAK634 Module SoC – Mediatek MT7628N MIPS processor @ up to 580 MHz System Memory – 128MB DDR2 RAM Storage – 16MB SPI flash Connectivity – WiFi: 2×2 MIMO 802.11b/n/n mPCIe LoRa concentrator card Semtech SX1301 based Standard version with 8 channel Gateway and also support Max.16 channel Gateway. Tx Power […]

January 15, 2019January 15, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

STMicro Introduces STEVAL-FKI001V1 Dual-Radio Bluetooth/LPWAN IoT Development Kit

STMicro has just launched a new development kit – STEVAL-FKI001V1 – that integrates two radios, one at 2.4 GHz for Bluetooth Low Energy (BLE), and another sub-GHz radio for LPWAN IoT standards such as Sigfox. The devkit targets the development of IoT devices such as smart sensors, finders, and trackers for smart-home or smart-building scenarios, asset-tracking, energy-management, smart-farming and industrial monitoring, and control use cases. STEVAL-FKI001V1 devkit key features & specifications: Jorjin WS2118-00 Sigfox & BLE module Embedded BlueNRG-132 Bluetooth LE Arm Cortex-M0 SoC with up to +8 dBm BLE RF output power, receiver sensitivity of -88 dBm Embedded S2-LPQTR ultra-low power sub-1 GHz transceiver tuned for 826-958 MHz frequency bands Up to +16 dBm sub-1GHz RF output power, receiver sensitivity down to -130 dBm Modulation schemes: 2-(G)FSK, 4-(G)FSK, OOK, and ASK Air data rate from 0.1 to 500 kbps Ultra-low power consumption: 7 mA RX, 10 mA TX @ +10 dBm; low duty cycle RX/TX operation mode, […]

November 28, 2018November 28, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Wistrio LoRa Tracker RK5205 Complies with 96Boards IoT Edition Specification

It’s not hard to find a LoRa GPS tracker board such as Rak Wireless RAK811 these days, but if for some reasons, you’d also like your board to comply with 96Boards IoT Edition form factor, Rak Wireless just launched Wistrio LoRa Tracker RK5205 for $49.50 plus shipping on Aliexpress and Amazon. Wistrio specifications: LoRa Module – RAK5205 module with SX1276 LoRa chipset, STM32L1 Arm Cortex-M3 microcontroller LoRa Connectivity LoRaWAN 1.0.2 protocol OTAA/ABP activation Programmable bitrate up to 300 Kbps Support for global bands: EU433, CN470, EU868, US915, AS923, AU915, KR920, and IN865 SMA & iPEX antenna options Location – Quectel L76-L GNNS chip supporting GPS, GLONASS, Galileo and QZSS system (pin-to-pin compatible with u-blox Max7) Sensors – LIS3DH 3-axis accelerometer, BME680 environmental sensor reporting gas, pressure, humidity and temperature data Expansion Header – I2C, GPIOs, UART and ADC Power Supply – Rechargeable battery via micro USB port, or 5V […]

November 19, 2018November 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

PyGo Wearable Devices Create LoRa Mesh Networks (Crowdfunding)

Pycom has made some interesting IoT boards running MicroPython in the past starting with WiFi capable WiPy in 2015, and followed by various others supporting various wireless standard including Bluetooth, LoRa, Sigfox, and NB-IoT with LoPy and Fipy. The company launched all their boards via crowdfunding campaigns, and they are now back on Kickstarter for their PyGo plug-n-play wearable devices creating PyMesh networks with up to 12km range between nodes, and managed using Pylife mobile app. Typical use cases include basic connectivity (e.g. messaging) in remote areas without cellular access, and assets / pets / kids location tracking, There are two version of PyGo: PyGo1 with mesh networking only, and PyGo2 that adds cellular network access. Pygo hardware specifications: SoC – Espressif Systems ESP32 dual core WiFi 4 + BLE SoC System Memory – 64 Mbit (8MB) RAM Storage – 8MB flash Display – 128×36 OLED display Connectivity PyMesh up […]

November 17, 2018November 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Allwize K2 IoT Board Supports 169MHz Wize LPWAN Protocol (LoRa alternative)

LoRa, Sigfox, and NB-IoT are probably the most popular low power long range wireless protocols for the Internet of Things, but there are several others, including one I had never heard of: Wize. The Wize Low Power Wide Area Network (LPWAN) protocol has been created in late 2017, leverages the “old and refurbished” 169 MHz frequency, support up to 20 km range, 20-year battery life, and is managed by the Wize Alliance with members including STMicroelectronics, Suez, Sagecom, Renesas, Analog Devices, Silicon Labs and many others. Despite being a recent protocol, the table below claims 3 millions of deployment for Wize, and showcases some of differences against LoRa, NB-IoT, and Sigfox. You may be confused as how the standard was created in at the end of 2017, but there are so many deployments, and 13 years experience. It appears Wize is derived from the older EN 13757 standard for gas […]

November 15, 2018November 16, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Arduino PRO Gateway for LoRa Features Raspberry Pi 3 Board

Arduino has just introduced the Arduino PRO Gateway for LoRa based on Raspberry Pi 3 development board, a LoRa gateway mPCIe module, and a metal enclosure. The strange thing about this product is that it does not feature any Arduino MCU, so why did Arduino design it? That’s because it works as a LoRa gateway for their Arduino MKR WAN 1300 IoT nodes. The gateway is sold as a kit with a LoRa gateway Embit EMB-LR1301-mPCIe card with SX1301 baseband chipset, an adapter for Raspberry Pi, an aluminum enclosure, a Raspberry Pi 3 model B+, a 5V power supply, an Ethernet cable, and an external antenna. Specifications for the LoRa part of the gateway: Chipset – Semtech SX1301 Modulation – LoRa Spread Spectrum, FSK, GFSK 868MHz (EU) / 915MHz (US) Number of Channels – 8 LoRa Channels Operating Frequency – 868MHz (EU) / 915MHz (US) Frequency Range – 860MHz to 1020MHz Operating […]