SB’s Dual Roundy and Squary Displays are powered by RP2040 or ESP32-S3 microcontrollers (Crowdfunding)

Dual Display Modules Roundy and Squary by SB Components

SB-Components has launched Dual Roundy and Dual Squary display modules powered by Raspberry Pi RP2040 or ESP32-S3 microcontrollers. These compact modules feature a 6-DoF IMU, interchangeable displays, and multiple storage and connectivity options. The Dual Roundy is equipped with two 1.28-inch round displays, with a 240 x 240 resolution, and uses the GC9A01 display driver IC. In contrast, the Dual Squary features two 1.54-inch square displays with a 240 x 240 resolution but utilizes the ST7789 display driver. Both displays offer a choice between a Raspberry Pi RP2040 MCU and the ESP32-S3-WROOM-1 module catering to different needs in performance and wireless capabilities. We’ve previously explored other rounded displays like the MaTouch ESP32-S3, T-RGB ESP32-S3, and ESP32-S3 Round SPI TFT. We’ve also examined other products from SB Components such as the Cluster HAT, PiMecha, PiTalk 3G HAT, and Micro RP2040. Feel free to check these out for more interesting tech insights. […]

Espressif announces the ESP32-C61 WiFi 6 SoC with improved affordability and wireless connectivity

ESP32 C61 Block Diagram

Espressif has announced the ESP32-C61 SoC, a new ESP32-Cx chip with improved wireless connectivity, and expanded memory options. The ESP32-C61 builds upon the foundation laid by previous ESP32-Cx chips, such as the ESP32-C2 and ESP-C3, and its specifications appear to be quite similar to the ESP32-C6 launched in early 2023, but this SoC also adds support for the BLE Mesh 1.1 protocol and Quad SPI PSRAM at a frequency of up to 120MHz. It supports WiFi 6 on two modes (802.11ax and 802.11b/g/n) and includes a Bluetooth 5 (LE) radio with support for long-range operation through advertisement extension and coded PHY. The TWT (Target Wake Time) feature is supported in 802.11ax mode to save power, as well as OFDMA (Uplink/Downlink) and MU-MIMO (Downlink) for a high-quality, low-latency connection between devices. ESP32-C61 specifications: CPU – Single-core, 32-bit RISC-V microcontroller that can be clocked up to 160MHz Memory: 320KB on-chip SRAM 256KB […]

The EQSP32 is a no-code, no-solder Industrial Internet of Things Controller powered by a generative AI assistant (Crowdfunding)

eqsp32 industrial controller

The EQSP32 controller is a complete, end-to-end solution for IoT applications that recently launched on Kickstarter. It is a compact, wireless Industrial IoT controller based on the ESP32-S3 wireless SoC with a 250MHz dual-core processor, 512KB of RAM, and 8MB of flash memory. The product leverages artificial intelligence and code for automation projects can be generated automatically by the bundled generative AI programming assistant. The EQSP32 controller features 16 terminals that can be configured as analog or digital inputs, or as digital outputs. Switches, pushbuttons, keypads, LED strips, sensors, servos, potentiometers, etc., can be connected to these terminals. It is similar to the EdgeBox-Edge-100 we covered a while back but lacks an Ethernet port and uses less power overall. EQSP32 specifications: SoC: Espressif Systems ESP32-S3 dual-core Tensilica LX7 microcontroller @ 240 MHz, 512KB RAM Memory – 8MB flash Network Connectivity: Bluetooth, WiFi USB – USB-C programming port I/O: 16 multipurpose […]

AAEON COM-R2KC6 – A COM Express Module featuring the AMD Ryzen Embedded R2000 Series

AAEON COM-R2KC6 front

AAEON, a Taiwan-based hardware manufacturer, has released the COM-R2KC6, a new COM Express module in the Type 6 compact form factor. This computer-on-module board is the first COM Express module to feature AMD’s mid-range processor series, the Ryzen Embedded R2000 series. The R2KC6 will be sold with an R2000 CPU, with TDP ranging from 15W to 45W and up to 4 cores and 8 threads (4C/8T). The R2000 SoCs provide up to two times the I/O connectivity and CPU core count of their R-series predecessors. Relatedly, ADLINK recently announced a COM Express Type 7 module based on AMD’s Ryzen Embedded V3000 processor. The COM-R2KC6 supports four simultaneous 4K displays through an embedded DisplayPort (eDP) connector and three Digital Display Interface (DDI) connectors. This means the integrated AMD Radeon Vega 8 graphics card can be used to its maximum potential. Additional graphics support is available through the board’s PEG x4 slot. […]

ASRock Industrial NUC Ultra 100 Meteor Lake-H motherboards feature Core Ultra 5 125H and Core Ultra 7 155H processors

ASRock Industrial NUC Ultra 100 Motherboard

ASRock Industrial has just announced two NUC Ultra 100 motherboards powered by Intel Core Ultra Meteor Lake-H processors namely the Core Ultra 5 125H and Ultra 7 155H with up to 16 cores and 22 threads, and integrating Intel ARC Graphics and the new Intel NPU AI engine. As the name implies, the NUC Ultra 100 Motherboard Series are designed in NUC form factor, support up to 96GB dual-channel DDR5-5600 MHz memory, three storage interface, up to four 4K displays, and offer two 2.5GbE networking ports, one USB4/Thunderbolt, and four USB 3.2 Gen 2 ports. ASRock Industrial says those features make the motherboards suitable for smart retail, kiosks, digital signage, smart cities, embedded industries, Edge AIoT applications, etc… NUC Ultra 100 motherboards specifications: Meteor Lake-H SoC (one or the other) Intel Core Ultra 7 T4 155H 16-core (6P+8E+2LPE) processor @ 1.4 / 4.8 GHz with 24MB cache, Intel 8Xe LPG […]

Infineon launches PSoC Edge Cortex-M55/M33 microcontrollers for enhanced AI and ML applications

The PSoC Edge microcontrollers integrate the Arm Cortex-M55 core with Helium DSP and the Ethos U55 NPU unit for advanced AI tasks. It also includes a power-efficient Arm Cortex-M33 core paired with an NNLite(DSP/NPU) for simpler AI tasks.

Infineon’s new PSoC Edge series of microcontrollers integrates the Arm Cortex-M55 core with Helium DSP and the Ethos U55 NPU unit for advanced AI tasks. It also includes a power-efficient Arm Cortex-M33 core paired with an NNLite(DSP/NPU) for simpler AI tasks. This setup allows the device to be more efficient in varying load conditions. Infineon’s PSoC lineup is a configurable microcontroller powered by Arm Cortex-M4, Cortex-M3, or Cortex-M0+ cores. The main USP (Unique Selling Point) of this lineup is its configurable digital and analog components. This feature makes them somewhat similar to an FPGA, but an FPGA is far more difficult to program than these microcontrollers and they are also very power-hungry. The device is equipped with advanced HMI and “Always-on” capability. “Always-on” is a feature of this device to constantly monitors and responds to signals automatically, making it suitable for smart homes, security, wearables, robotics, and many more. Key […]

ESP32 Qwiic Pro Mini is an ESP32 board in Arduino Pro Mini form factor

Sparkfun's latest development board puts Espressif ESP32-PICO-MINI-02 on a compact Arduino Pro Mini footprint. It also includes an onboard QWICC connector for easy interfacing with a wide range of sensors and peripherals,

SparkFun’s latest development board, the ESP32 Qwiic Pro Mini, puts the Espressif ESP32-PICO-MINI-02 on a compact Arduino Pro Mini footprint. It also includes an onboard QWICC connector for easy interfacing with a wide range of sensors and peripherals. We have already covered other Sparkfun dev boards like DataLogger IoT, Datalogger IoT – 9DoF, and SparkFun Thing Plus Matter you can check those out if interested. Like any other ESP32 board, this also uses an ESP32 microcontroller which features a 32-bit dual-core processor, 520kB of SRAM, 2MB of PSRAM, 8MB of flash memory, and 16 kB of additional SRAM in its RTC. It supports Bluetooth 4.2 and BLE and has ADC and DAC, touch detection, PWM, TWAI, Ethernet MAC, UART, SPI, SDIO, I2C, and I2S interfaces. As reported in a Hackster article, the board also features a Qwiic Connector for solderless connections to sensor boards and add-ons, positioned at a 90-degree angle […]

M5StickC PLUS2 IoT development kit features ESP32-PICO-V3-02 SiP, larger 200 mAh battery

M5StickC Plus2 IoT development kit

M5Stack M5StickC PLUS2 is a battery-powered ESP32 IoT development kit with a 1.14-inch display, a built-in microphone, a 6-axis gyroscope and accelerometer, a few buttons, a buzzer, a Grove connector and a GPIO header for expansion. It builds upon the M5StickC Plus released in September 2020, but replaced the ESP-PICO-D4 SiP with an ESP32-PICO-V3-02 still based on ESP32 WiSoC but having 8MB SPI flash and 2MB flash and also features a larger 200 mAh battery along with a new CH9102 USB to TTL chip and does without a PMIC. M5StickC PLUS2 key features and specifications: ESP32-PICO-V3-02 SiP – Espressif Systems ESP32-PICO-V3-02 system-in-package with ESP32 dual-core WiFI and Bluetooth IoT processor @ up to 240 MHz, 8MB SPI flash, 2MB PSRAM Display – 1.14-inch Color TFT LCD with 135×240 resolution (ST7789v2 driver) Audio – SPM1423 microphone, buzzer USB – 1x USB-C port for power and programming using CH9102 USB to TTL chip […]

Exit mobile version
EmbeddedTS embedded systems design