Compulab IOT-GATE-IMX8 is a Debian Linux powered fanless Industrial IoT gateway powered by NXP i.MX 8M Mini processor and specially designed for industrial control and monitoring with optional support for WiFI 6 (802.11ax), Bluetooth 5.1, 4G LTE, and GNSS connectivity. The gateway is equipped with up to 4GB RAM and 128GB eMMC flash, takes variable DC input from 8V to 36V, and operates in a wide temperature range of -40C to 80°C with the company providing a 5-year warranty and 15-year availability. Compulab IOT-GATE-IMX8 specifications: SoC – NXP i.MX8M Mini quad-core Arm Cortex-A53 processor @ 1.8GHz with Arm Cortex-M4 real-time core, Vivante 3G and 2D GPU System Memory – 1GB – 4GB LPDDR4 Storage – 4GB – 64GB eMMC flash (soldered on-board), plus secondary storage with optional 16GB – 64GB eMMC flash module Networking & Wireless Connectivity Gigabit Ethernet port, RJ45 connector Fast Ethernet port, RJ45 connector Optional 802.11ax WiFi […]
Skytraq PX1122R Tiny Multi-Band RTK GNSS Module Offers Centimeter Accuracy
Several years ago Skytraq introduced NavSpark mini, a tiny (17x17mm) GPS module, that sold for $6. I got one and wrote a post explaining how to get started with the GPS module using GNSS viewer program. The company contacted me again today, as they’ve now launched an even smaller module Skytraq PX1122R measuring just 16x12mm, supporting GPS, Galileo, GLONASS, and Beidou signals, as well as Real-time Kinematic (RTK) relative positioning technique that allows for 1-3cm positioning accuracy. Skytraq PX1122R RTK GNSS module key features & specifications: Chipset – SkyTraq PX100 Phoenix GNSS chipset Supported GNSS standards & bands – GPS L1/L2C, Galileo E1/E5b, Beidou B1I/B2I, GLONASS L1/L2, QZSS L1/L2C Integrated RTK with 1cm + 1ppm RTK accuracy in seconds (under 10 seconds) Up to 10Hz quad-GNSS RTK update rate Base or rover mode configurable Serial Interface – 3V LVTTL level 24x castellated holes with UART, RF input, 1PPS, Reset, 3.3V, […]
WiFi & Cellular Router Focuses on Security, Always-on Connectivity with 2GB Free Monthly Data (Crowdfunding – US)
We previously covered Roqos Core RC10 Intel Atom-based AC router that was offered for only $19 with the catch of having to $17 per month for “advanced cybersecurity and parental control features” for at least a year. The company is now back with Roqos Core RC20 AC router that adds supports for cellular connectivity including 2GB per month of cellular data, and a focus on security with built-in VPN service so you can connect securely from anywhere, even public WiFi hotspots. Roqos Core RC20 hardware specification: SoC – Intel Atom E3845 quad-core processor @ up to 1.91 GHz cores System Memory – 2GB RAM Storage – 8GB flash Video Output – HDMI (but not sure whether it’s used since not listed in the specs) Connectivity Wired – 1x Gigabit Ethernet WAN port, 4x Gigabit Ethernet LAN ports Wireless – Simultaneous dual frequency 3×3 802.11ac WiFi 5 and 2×2 802.11n WiFi […]
Particle Tracking System Offers Software, Hardware LTE IoT Module and Tracker in Turnkey Solution
Particle’s first cellular M2M module was launched in 2015 when the company was still called Spark IO. Since then they’ve offered new modules and boards supporting recent standards like NB-IoT and/or LTE Cat-M with product likes Boron and E series castellated modules. The company found out that most of their customers used their boards for asset tracking despite many off-the-shelf products already available, and the main reason was the ability to customize the solution. To help their customers, the company has now launched the Particle Tracking System combining a software suite with LTE IoT system-on-module and Tracker One reference product to ease the development and deployment of customized asset tracking solutions. Particle Tracking System is comprised of three main components relying on the existing Particle IoT platform: Particle Tracking Services software suite with geolocation services (mapping and geodatabase), fleet-wide device management, an open device firmware application framework to integrate with […]
Meshtastic Mesh Networking Project Combines ESP32, LoRa and GPS Radio
Meshtastic is a project using off-the-shelf, inexpensive ESP32-based hardware with GPS & LoRa connectivity to create mesh networks helping hikers. skiers, paragliders, or people exercising other outdoor activities communicate short messages such as their GPS location. This allows each member of a private mesh network to see the location and distance of all other members and read/or any text messages sent to a group chat. No phone is required unless you have an ESP32 LoRa board without GPS in which case it would get the GPS coordinates from your phone over Bluetooth. A phone is also needed to send a message. The project currently works on three different boards TTGO T-Beam, TTGO LORA32 and Heltec LoRa 32. The T-Beam is recommended as it sells for around $26 plus shipping and features a 18650 battery holder so you can source the battery easily locally. Just make sure to purchase the right […]
Semtech LoRa Edge Uses LR1110 Single Chip with LoRa, WiFi, and GNSS
Semtech, a leader in LoRa and RF technology, is continuing its support for the LoRa ecosystem with the launch of a new portfolio of solutions called LoRa Edge to simplify and accelerate IoT applications for the Edge. LoRa Edge is a new highly versatile and low power software-defined LoRa-based platform that will enable a wide portfolio of applications for indoor and outdoor asset management, targeting industrial, building, home, agriculture, transportation, and logistics markets. The LoRa Edge platform is launching with a geolocation solution targeted to IoT applications for asset management. It features an ultra-low power LoRa transceiver, GNSS sniffing capabilities, Wi-Fi scanning technologies all in one single package called Semtech LR1110. “Semtech continually delivers Internet of Things (IoT) solutions that simplify and accelerate the development of LPWAN applications,” said Pedro Pachuca, Director of IoT Wireless in Semtech’s Wireless and Sensing Products Group. “LoRa Edge and LoRa Cloud geolocation services enable customers […]
Semtech LoRa Asset Tracking Reference Kit Includes one LoRaWAN Gateway, Six Waterproof GPS Trackers
The Things Conference is taking place now until January 31, so we should expect a few LoRaWAN announcements, and yesterday we covered Semtech LLCC68 LoRa transceiver for smart home applications, but the company also introduced a LoRa asset tracking reference kit to ease the deployment and evaluation of LoRa based tracking solutions. The kit is comprised of one LoRaWAN gateway, and six waterproof trackers with GPS and LoRa connectivity which everything supposed to work out of the box. The gateway, as shown above, comes with LoRa, cellular and GPS antennas, as well as a PoE power supply. It ships with a pre-configured SIM card to connect to the cloud platform over 3G/4G. Six industrial LoRaWAN-based GPS trackers are also included with the kit. Each comes with a battery but the trackers need to be activated by the user. Interestingly they are not using a button to turn on and off […]
Qualcomm Introduces Snapdragon 720G, 662, and 460 4G Mobile SoCs with NavIC GNSS
While 5G is ramping up, 4G LTE handsets will still be dominant in terms of market demand for a few more years. So Qualcomm has unveiled three new mobile SoC for mid-range smartphones with Snapdragon 720G, Snapdragon 622, and Snapdragon 460 that also happen to be one of the first processors to support Navigation with Indian Constellation (NavIC). Snapdragon 460 Key features: CPU – 8x Kryo 240 cores up to 2.3GHz GPU – Adreno 610 GPU DSP – Hexagon 683 with vector extensions, hardware-accelerated TensorFlow Lite ISP – Spectra 340 ISP supporting 25MP camera, or dual 16MP camera Connectivity Cellular – Snapdragon X11 LTE modem WiFi 6 ready Bluetooth 5.1 with advanced audio via the Qualcomm FastConnect 6100 platform GNSS – Dual-Frequency (L1 and L5) GNSS for GPS, Galileo, GLONASS, Beidou, NavIC Quick Charge 3.0 – 0 to 50% in 20 minutes Process – 11nm Snapdragon 460 is an update […]