esp32 News - Page 60 of 80 - CNX Software

October 5, 2020February 22, 2021 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

FeatherS2 Board Brings ESP32-S2 to Adafruit Feather Form Factor

We’ve covered a fair number of development boards following Adafruit Feather form factor in the last year or so with products such as QuickFeather Cortex-M4 + FPGA board, OrangeCrab (Lattice FPGA), nRF9160 Feather providing LTE IoT & GPS connectivity, and other boards. But here’s yet another Adafruit Feather themed board that has just launched: FeatherS2. The tiny board is equipped with the latest Espressif Systems ESP32-S2 WiFi SoC, 16 MB SPI Flash, 8 MB PSRAM, several I/O, and a USB-C port for power and programming. FeatherS2 key features and specifications: SoC – ESP32-S2 single-core Tensilica LX7 processor @ 240 MHz, RISC-V ultra-lower power co-processor, 320 kB SRAM, 128 kB ROM Memory – 8 MB extra PSRAM Storage – 16 MB SPI Flash Connectivity – 2.4 GHz Wi-Fi – 802.11b/g/n with 3D antenna USB – 1x USB-C port for power and programming Sensor – ALS-PT19 Ambient Light Sensor Expansion 16 + […]

September 5, 2020September 6, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

M5StickC PLUS ESP32-PICO Devkit Comes with 1.14-inch LCD, 120 mAh Battery and Buzzer

M5StickC PLUS ESP32-PICO DevKit Bluetooth and WiFi

Shortly after introducing the Core2 ESP32 IoT Development Kit with a 2-inch touch display, 390 mAh battery earlier this week, M5Stack has announced the availability of another ESP32 WiFi & Bluetooth IoT devkit, with the more compact M5StickC PLUS featuring a 1.14-inch display, a 120mAh battery, motion, sensor, a buzzer and the usual Grove connector for expansion. M5StickC PLUS is an upgrade to the original M5StickC that lacks the buzzer and features a smaller 0.96-inch display and a lower capacity 96 mAh battery. The new model can be purchased now for $13.95 plus shipping on Aliexpress, while the original device, that happens to be M5Stack top-selling product, is still available for $9.95. M5StickC PLUS key features and specifications: SiP – Espressif Systems ESP32-PICO-D4 system-in-package with ESP32 dual-core WiFI and Bluetooth IoT processor @ up to 240 MHz, 4MB SPI flash Display – 1.14-inch Color TFT LCD with 135×240 resolution (ST7789v2 […]

September 1, 2020September 1, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

M5Stack Launches Core2 ESP32 IoT Development Kit with 2-inch Touch Display

M5Stack has just launched an upgrade to its M5Stack Core development with M5Stack Core2 based on the same Espressif ESP32 WiFI + Bluetooth SoC, but adding capacitive touchscreen support to the 2-inch TFT LCD, as well as a motion sensor and a microphone. The new version also adds 8MB PSRAM, a larger 390 mAh battery, and targets IoT terminals for Smart Home, industrial automation or robotics, STEM Education, and DIY prototyping. M5Stack Core2 specifications: SoC – Espressif ESP32-D0WD-V3 dual-core Xtensa LX6 processor clocked at up to 240MHz with 520KB SRAM, Wi-Fi, and dual-mode Bluetooth connectivity External Memory – 8MB PSRAM Storage – 16MB flash storage, MicroSD card slot up to 16GB Display – 2-inch IPS LCD screen with 320×240 resolution (ILI9342C driver), and touchscreen support (via FT6336U controller) Audio – 1W speaker (1W-0928), SPM4123 microphone, NS4168 I2S power amplifier Antenna – 2.4GHz 3D antenna USB – 1x USB Type-C port […]

September 1, 2020January 2, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Espressif Unveils ESP32-S2-MINI Modules, ESP32-S3 and ESP32-C3 SoC’s Coming Soon

Espressif Systems has unveiled two new ESP32-S2 WiFi modules part of the new MINI series modules, namely ESP32-S2-MINI-1U with IPEX antenna, and ESP32-S2-MINI-1 with a PCB antenna. The press release also mentions upcoming ESP32-S3 and ESP32-C3 processors with few details. Let’s have a look. ESP32-S2-MINI modules Preliminary specifications: SoC – Espressif ESP32-S2FH4 single-core 32-bit LX7 microcontroller @ up to 240 MHz, RISC-V ultra-low-power co-processor, 320 kB SRAM, 128kB ROM, 2.4 GHz WiFi 4 connectivity, 4MB flash Antenna ESP32-S2-MINI-1 – PCB antenna ESP32-S2-MINI-1U – IPEX antenna connector Dimensions ESP32-S2-MINI-1 – 20 x 15.4 x mm ESP32-S2-MINI-1U – 15.4 x 15.4 x mm The company states the exact processor SKU used in the module is ESP32-S2FH4, but initially I could not find out it differed from ESP32-S2 since it has the same specs include a single-core processor, ULP core, up to 43 GPIOs, and USB-OTG support. It turns out the flash appears […]

August 31, 2020August 31, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Heart Rate Development Kit Features ESP32 WiSoC, MAX30102 Pulse Oximeter & HR sensor

Arduino ESP32 Heart Rate-Oxygen Level Monitor

LilyGO has launched a fair amount of ESP32 boards with some less common features like Ethernet and OLED Display, cellular connectivity, LoRa & GPS, PoE, watch form factor, and more. Their latest product is somewhat different from their earlier boards with the TTGO Heart rate programming development kit being closer to a reference design since it comes with an enclosure similar to commercial products. The heart rate devkit features ESP32 WiFi and Bluetooth SoC, a small LCD, as well as a Maxim Integrated MAX30102 pulse oximeter and heart-rate sensor. TTGO heart rate development kit specifications: SoC – Espressif Systems ESP32 dual-core Tensilica SoC with WiFi 4 & Bluetooth connectivity Display – 0.96-inch IPS LCD via ST7735 SPI controller Sensors MAX30102 heart rate blood oxygen I2C sensor MPU6050 6-axis accelerometer and gyroscope (I2C) Debugging – Micro USB port via CP2104 USB to TTL bridge Misc -PCF8563 RTC, user button Battery […]

August 28, 2020August 28, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

RISC-V & ESP32 based TTGO Handheld T-WATCH K210 AIoT DevKit Works with a 9V Battery

TTGO Handheld T-WATCH-K210 RISC-V & ESP32 Devkit

LilyGO TTGO T-Watch K210 AIOT is a rather thick watch development kit based on Kendryte K210 RISC-V AI Processor and ESP32 WiSoC capable of performing AI workloads such as face detection using a USB power source. We first covered the development kit in June, and the company releases some small variants from time to time with the latest being TTGO Handheld T-Watch K210 with basically the same hardware, plus the addition of a handle that adds a power button, and a compartment for a 9V battery to power the watch/devkit. TTGO Handheld T-Watch K210 specifications: SoC – Kendryte K210 dual-core 64-bit RISC-V processor with 8MB RAM, AI accelerators Storage – 16MB flash, MicroSD card slot Display – 1.54-inch capacitive touch IPS screen connected over an 8080 interface Camera – Adjustable 2MP OV2640 sensor with 65-degree lens (optional 120-degree angle lens), AS312 “human” infrared sensor Connectivity – 2.4 GHz 802.11b/g/n WiFi […]

July 30, 2020February 21, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Espressif and Amazon Introduce ESP32-PICO-V3-ZERO Alexa Connect Kit Module

Espressif Systems & Amazon have recently announced ESP32-PICO-V3-ZERO Alexa Connect Kit (ACK) module providing out-of-box connectivity to ACK cloud services, support for features such as Alexa control, “Frustration-Free Setup” and Amazon Dash replenishment for connected devices. The tiny (23 x 16 x 2.3mm) module is based on the company’s ESP32-PICO-V3 System-in-Package (SiP) based on ESP32-V3 dual-core Xtensa LX6 WiFI and Bluetooth SoC, a 4 MB SPI flash, a crystal oscillator, filter capacitors, and an RF matching network. The module supports 2.4 GHz 802.11 b/g/n WiFi, Bluetooth, and Bluetooth Low Energy connectivity and comes with a PCB antenna and a u.FL connector to plug in an external antenna [Update: That should be an RF test connector instead, see comments]. ESP32-PICO-V3-ZERO module interfaces to a host MCU through a UART interface, and to speed-up time-to-market the module comes pre-certified for regulatory certifications such as FCC, CE, SRRC, IC, and RCM. The module […]

July 29, 2020July 29, 2020 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

TTGO T-Lite W5500 ESP32 WiFi & Bluetooth Board Comes with OLED Display, Optional Ethernet Add-on Board

If you like tiny boards with Ethernet, TTGO T-Lite W5500 development board may be an interesting option, as the ESP32 board comes with a built-in OLED, and female headers to connect an Ethernet add-on board called W5500 Gateway Module. LilyGO TTGO T-Lite W5500 specifications: SoC – Espressif System ESP32 dual-core WiFi and Bluetooth SoC with 520KB SRAM Storage – 4MB flash Display – 0.96-inch OLED display (SSD1306 driver) Connectivity 802.11 b/g/n WiFi 4 up to 150 Mbps, and Bluetooth 5.x BR/LE via ESP32 SoC, on-board ceramic antenna or external antenna (selectable with a resistor?) Optional Ethernet via SPI Ethernet board based on Wiznet W5500 USB – 1x USB Type-C port for power and programming via CP2104 USB to TTL chip I/Os 8+6 through holes with GPIOs, SPI, ADC, Touch, 5V, 3.3V, GND Operating voltage – 2.7V-3.6V Misc – Boot & Reset button, 40MHz crystal oscillator Power Supply – 5V/1A via […]