ble News - Page 53 of 60 - CNX Software

September 2, 2016September 3, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Espressif ESP32 WiFi & Bluetooth SoC is Now Up For Sale for $2.85

Espressif ESP32 is one of the most awaited chip for IoT applications as it combines a dual core processor, WiFi, Bluetooth 4.0, and various I/Os. The good news is that you can now purchase ESP32 for 19 RMB ($2.85) on Taobao, or if you are not based in China, contact Espressif by email at sales [at] espressif.com. Availability is however limited, and the maximum order is now 5 pieces. ESP32 modules and boards, as opposed to just the SoC, are not quite ready right now, but should become available in a few weeks. ESP-WROOM-32 is the ESP32 module developed by Espressif, and NodeMCU is also working on an ESP32 board, so we’ll get more good news very soon. You can also find documentation, hardware and software resources on a Espressif ESP32 page , including a getting started guide, ESP32 SDK, ESP32 reference manual, ESP-WROOM-32 datasheet, and more. If you are […]

August 30, 2016August 30, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Fitbit Introduces Charge 2 and Flex 2 Fitness Trackers

My first activity tracker, Vidonn X5, worked reasonably well and lasted for over a year, but the subsequent models I tried were all mostly disasters, especially as they added some features like a heart rate monitor that did not work reliably, and worse, their lifetime was poor, lasting only a few days to a few weeks before stopping working. My Xiaomi Mi Band 2 died last week-end, two days after a firmware update which decreased battery life to less than a day, and now refuses to charge. While the HRM was utterly useless, it did count steps fairly accurately, and battery life was good. Sadly, it would only last about two months. So at this stage, it might be worth spending more for a fitness tracker, and Fitbit has unveiled two new models with Charge 2 and Flex 2. Fitbit Charge 2 includes a 1.5″ OLED touchscreen display, and an […]

August 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Dot is a Location Aware Bluetooth Beacon Used as a Digital Post-it, for Home Automation, and More (Crowdfunding)

Dot physical push notification is another Bluetooth beacon, but the company – Iota Labs – has designed and promote it in a location aware device that gets triggered when you move in a specific area with your smartphone. For example, somebody can leave a dot with a message such as “remember to take the trash out” in the kitchen, and once you walk pass you’ll receive a notification, or you can use a dot to automatically turn on the light if you enter a room at night. The full technical specifications have not been made available but here’s what we know: MCU – Nordic Semi nRF51822 (or similar) ARM SoC with Bluetooth radio Connectivity – Bluetooth 4.0 LE with a range up to around 45 meters Misc – RGB LED Battery – Replaceable battery good for 6 months to one year Android and iOS apps will allow your to configure […]

August 24, 2016November 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 45 Comments

M12N Amlogic S912 Octa-core TV Box Review – Part 2: Android 6.0 Firmware

Shenzhen Shiningworth MXQ Plus M12N is one of the first TV box powered by Amlogic S912 octa-core processor also bringing a faster GPU, VP9 and HDR support compared to the earlier Amlogic S905 processor. I’ve already shown the device, its accesories, and its internal degisn in the first part of MXQ Plus M12N review, so today I’ll spend time reporting my finding testing features and performance with Android 6.0 firmware. Setup Wizard and First Impressions Since there are only two USB ports, I connected my USB hard drive to one, and used a USB hub to connect input devices including two RF dongles for an air mouse, and a gamepad, as well as a USB keyboard to take screenshots. I also added Ethernet and HDMI cable, and finally connected the power supply to boot it up. But as you can see from the picture the very first boot was not […]

August 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

TW68 Smart Bracelet Measures Blood Pressure and Heart Rate for $22 and Up

Some people may need to frequently measure their blood pressure because of their health condition, but it’s often a cumbersome experience, so they may get lazy, and not do it as often as needed. TW68 smart bracelet should make this easy, as it’s your typical fitness tracker with an heart rate monitor, but adding the capability to also measure blood pressure. It’s also very cheap, and I first found it on DealExtreme where it sells for just $24. TW68 specifications: MCU – Nordic Semi NRF51822 ARM Cortex M0 micro-controller with 2.4 GHz radio Data Storage – 7 days detailed data, 23 days total data Connectivity – Bluetooth 4.0 LE Display – 0.49″ OLED display Sensors – PixArt-PAH8001EI blood pressure sensor; 6-axis Invensense-MPU6500 accelerometer and gyroscope Function Health tracker: Blood pressure measurement, Heart rate monitor, Pedometer, Sleep tracker Other functions: Call/Message notification, Fall reminder, Social sharing, Time, Alarm clock Misc – […]

August 5, 2016May 8, 2024 by Jean-Luc Aufranc (CNXSoft) - 120 Comments

NEXBOX A95X (Amlogic S905X) TV Box Review – Part 2: Android 6.0 and Kodi 16.1

Last week I publish the first complete review of an Amlogic S905X device with MINI M8S II TV box review, and while the device work in a smooth and stable manner, some features did not work as expect such as HDMI audio pass-through. I’ve now had the change to compare it to another S905X with NEXBOX A95X, not to confuse with its “homonym”: NEXBOX A95X with Amlogic S905 processor. I’ve already taken pictures of the device and accessories, and checked out the hardware in the first part of the review, so today, I’ll report my finding playing with Android 6.0 firmware, Kodi video and audio capabilities, and check whether bugs and issues found on MINI M8S II are also present in the device. First Boot, Settings and First Impressions NEXBOX A95X is really a tiny device, so it’s no surprise that it only comes with two USB 2.0 ports, and […]

July 27, 2016July 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

RuuviTag Open Source Bluetooth & NFC Sensor Beacon is Based on Nordic Semi nRF52832 SoC (Crowdfunding)

I’ve recently featured Puck.js Bluetooth 4.2/5.0 Beacon on CNX Software, but there’s another similar option with RuuviTag, also powered by the latest Nordic Semi nRF52832 ARM Cortex-M4 SoC, and RuviiTag+ version that includes multiple sensors: 3-axis accelerometer, and temperature, humidity, and pressure sensor. RuuviTag & RuuviTag+ specifications: SoC – Nordic Semi nRF52832 ARM Cortex-M4F micro-controller @ 64 MHz with Bluetooth Smart and NFC Connectivity Bluetooth 4.2 Smart, Bluetooth 5.0 Ready; over 500 meters line of sight range (with -4dBm power); up to 1.4 km with +4 dBm Integrated NFC antenna Expansion – 8x through holes with 6x GPIOs, and 2x power signals Sensors On-chip temperature sensor RuuviTag+ – Bosch BME280 environmental sensor (pressure, humidity, and temperature), STMicro LIS2DH12 3-axis accelerometer Misc – User/reset button, 2x LEDs, 10-pin SWD debug connector Battery – CR2450 / CR2477 battery up to 10 years depending on application Dimensions – N/A Temperature Range – -40°C […]

July 26, 2016July 26, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Bagel is a Smart Bluetooth Tape Measure Compatible with Android and iOS Phones (Crowdfunding)

The tape measure is a pretty simple tool allowing you to measure length, and I assume most people will write results on a piece of paper. Battery powered Bagel tape measure changes that as it allows measurements with a string, through a wheel, or an ultrasonic sensors, store the data in its internal memory with voice to text memo, and also sends back data over Bluetooth to your smartphone. Bagel Labs tape measure specifications: Three measure modes – string (up to 3 meters), wheel (up to 10 meters), or ultrasonic sensor (0.3 to 5 meters) Storage – 32 MB flash for up to 100 measurements and voice memo (Both metric and imperial units supported) Connectivity – Bluetooth 4.0 LE Audio – Microphone for voice to text recording Display – 0.96″ OLED display; 128×96 resolution USB – 1x micro USB port for charging Misc – laser pointer for ultrasonic measurement; save […]