4k News - Page 55 of 82 - CNX Software

December 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Full Specifications for Intel Apollo Lake NUC Mini PC’s NUC6CAYB Board Released

Intel unveiled Intel NUC6CAYS & NUC6CAYH NUCs to be powered by Intel Celeron “Apollo Lake” Jxxx processors, but at the time we did not have the full technical specifications. The company has now published a 66-page technical product specification for NUC6CAYB board used in both mini PCs. Intel NUC Board NUC6CAYB specifications: SoC – Intel Celeron J3455 quad core processor @ 1.5 GHz to 2.3 GHz (burst) with 12EU Intel HD graphics 500 @ 250 to 700 MHz supporting DirectX 9.3/10/11.1/12, OpenCL 1.2, OGLES 3.0, OpenGL 4.3 (10W TDP) System Memory – 2x DDR3L-1600/1833 SO-DIMM supporting up to 8GB DDR3L-1866 in total Storage – 32GB eMMC flash (Sandisk, Hynix or Samsung depending on your luck), 2.5″ SATA3 bay for hard drives up to 9.5mm thick, SDXC slot with UHS-I support Video Output – HDMI 2.0 (4K @ 60 Hz) with HDMI CEC via MegaChips MCDP2800-BCT DisplayPort 1.2a to HDMI 2.0 […]

November 29, 2016November 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Canon 4K600STZ 4K UHD Laser Projector Delivers up to 6,000 Lumens

At the beginning of the year, I wrote about Texas Instruments’ DLP technology for affordable 4K projectors, and the company’s DLP 0.67″ digital micromirror device (DMD) was expected to be found in 4K projector in the second half of 2016. So I went on Amazon, and I could find lots of “4K UHD projectors” with prices starting at $599, but if we look into details we may find some of those are “4K projector” with a 1280×800 resolution… And many of the ones selling in the $2,000+ range don’t list their native resolution with many able to handle 4K input, but actually projecting at 1920×1080 as can be seen in the table below. The most honest companies promote those models as “projectors with 4K Enhancement”, but if you want a true 4K projector, the cheapest option is probably Sony VPL-VW350ES that goes for close to $10,000 on Amazon. CNET has […]

November 23, 2016November 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Zidoo Releases Digital Signage SDK for X8 and X9S Android TV Boxes

Zidoo X9S and X8 are Android 6.0 + OpenWrt TV boxes powered by Realtek RTD1295 processor with HDMI input supporting PIP, UDP broadcasting and video recording, which works reasonably well despite some 4K video decoding limitations. The company has now released a “digital signage SDK” – which I’d rather just call a digital signage demo – working on either device on github, but you can still study the source code in order to build your own. Some of the possible features showcased in the demo include: Digital Signage (AD) player as shown above with video, picture and scrolling text Multi Views display (HDMI IN + Video playing + Web browsing) Multi Videos decode Screen rotation Screen zoom in / out Display output resolution switch HDMI IN player HDMI IN picture in picture (PIP) So it’s not a total solution, just an “SDK” showing what can be done with media files, and you’d still have to write your own app managing content updates (from storage or network), as well as some content management software. Two apks are used: […]

November 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 117 Comments

R-Box Pro 3G Android TV Box Review – Part 2: Android 6.0 Firmware

The vast majority of octa-core Android TV Boxes sold on the market comes with 2GB RAM, but Amlogic S912 based R-Box Pro TV box was interesting with its 3GB RAM option (aka R-Box Pro 3G), as I wondered if I would see any noticeable improvements during my tests with the extra RAM. We’ve already confirmed the the hardware comes with 3GB RAM using 2x 1GB + 2x 512MB RAM chips configuration in the first part of the review last month, and it’s now time to check out whether this translates to anything in Android, as well as go through the usual hard-to-get features to work like automatic frame rate switching and HD audio pass-through. First Boot, Firmware Update, and First Impressions One positive with the device is the four USB ports, so this time I did not need an USB hub at all, and connected a USB HDD, two RF […]

November 18, 2016November 18, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Vorke Z1 Amlogic S912 Android TV Box Comes with 3GB DDR4 Memory

DDR4 memory is coming to one more TV box. We first discovered it in Yundoo Y7 TV box powered by Amlogic S905X processor, but now Vorke, which started with Vorke V1 Intel Braswell mini PC and then V2 Ultra earlier this year, has now launched Vorke Z1 TV box with an octa-core Amlogic S912 processor combined with 3 GB DDR4 memory with higher bandwidth than your typical DDR3(L) memory. Vorke Z1 specifications: SoC – Amlogic S912 octo-core ARM Cortex A53 processor @ up to 1.5 GHz with ARM Mali-820MP3 GPU System Memory – 3GB DDR4 Storage – 32GB eMMC flash + micro SD slot up to 32GB Video Output – HDMI 2.0a with HDR and CEC support up to 4K @ 60 fps, and 3.5mm AV jack for composite output Audio Output – HDMI, AV jack (stereo audio), and optical S/PDIF Video codecs – VP9, 10-bit H.265 up to 4K […]

November 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Egreat A10 4K Android Media Center Comes with an Internal 3.5″ SATA Bay, an external SATA Port and a USB 3.0 Port

Egreat A10 is an Android TV box powered by Hisilicon Hi3798CV200 processor, coupled with 2GB RAM, 16GB flash, and is an exciting device for people who like to keep the media files on local storage, as it includes an Internal SATA bay for 3.5″ hard drive, an external SATA connector for 2.5″ “laptop” drives, as well as a USB 3.0 port. Egreat A10 specifications: SoC – HiSilicon Hi3798C V200 quad-core ARM Cortex A53 processor @ up to 2.0 GHz with ARM Mali-T720 GPU System Memory – 2GB DDR3 Storage – 16 GB eMMC flash + 3.5″ SATA bay + external SATA interface with support for EXT-3/4, FAT32, NTFS and GPT Video Output – HDMI 2.0a up to 4K2K @ 60 Hz and CVBS output (RCA) Video Codecs – 10-bit H.265/HEVC 4Kx2K@60fps, VP9 up to 4K @ 60 Hz, H.264 AVC, H.264/AVC MVC up 1080p30, MPEG-1/2/4 up to 1080p60, VC-1 up […]

November 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

HF10 is a 2-in-1 Android 6.0 TV Box & Bluetooth Speaker Powered by Amlogic S905X Processor

We’ve previously seen CS668 TV box combining an Android TV box, a Bluetooth Speaker, and a power bank into a single device, but audio quality is likely to be mediocre on such as small device. Eny Technology HF10 is slightly different as it combines an Amlogic S905X Android TV box with a larger 10 Watt speaker with a class-D amplifier, and can also used as a Bluetooth speaker. HF10 specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 1GB DDR3 (option: 2GB) Storage – 8GB eMMC flash (Options: 16 and 32GB) + micro SD slot up to 32 GB Video Output – HDMI 2.0 up to 4K @ 60 Hz Audio HDMI output 2.5″ 10W mono bass speaker with class-D amplifier Connectivity – 10/100M Ethernet, 802.11 b/g/n/ac Wi-Fi, and Bluetooth 4.0 USB – 1x USB 2.0 host port Misc […]

November 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Rikomagic MK22 Review – Part 2: Android Firmware, Video & Audio in Kodi, Benchmarks…

Rikomagic MK22 is one of the many Android TV boxes powered by Amlogic S912 octa-core processor with typical hardware specifications such as 2GB RAM, 16GB flash, Gigabit Ethernet and dual band WiFi. I’ve already taken the box apart to check out the hardware in the first part of the review, so I’ll focus on the firmware, but I’ll keep it short focusing on typical problem areas, as I’ve already reviewed a bunch of other Amlogic S912 TV boxes such as Qintaix Q912 or Beelink GT1. First Boot, Firmware Update, and First Impressions After having connected all usual cables and accessories include a 1TB USB hard drive, and RF dongles for my air mouse and wireless gamepad, I booted the device, and after around 45 seconds (typically), I got to the main launcher. Since I received the device about a month ago, I decided to go to the UPDATE&BACKUP app to […]