Archermind launched Mediatek X20 board powered by Mediatek Helio X20 deca-core processor, and compliant with 96Boards CE hardware specifications last year for $199. The company has now been working on a “professional” version, dubbed Mediatek X20 Pro that adds supports for 3G and 4G / LTE, as well as extra I/O connectors for cameras, LCD modules, and an RF baseboard. Alpha Star Mediatek X20 Pro board specifications: SoC – Mediatek Helio X20 (MT6797) deca-core processor with two ARM Cortex A72 cores @ 2.1~2.3 GHz, four Cortex A53 @ 1.85 GHz, four Cortex A53 @ 1.4 GHz, and ARM Mali-T880 GPU @ 700 MHz System Memory – 2GB LPDDR3 2-ch @ 933 MHz Storage – 8GB eMMC 5.1 flash + micro SD 3.0 card slot Video Output – HDMI up to 1080p @ 30 fps Video Support – 25MP @ 24fps / 25MP @ 30 fps; WQXGA 2560×1600 60fps; FHD 1920×1080 […]
Linux based iWave Systems OBD-II Dongle Comes with 4G LTE and GPS
OBD-II dongles that you connect to your car’s OBD-II port have been around for several years, but they were initially simple devices with USB or Bluetooth connectivity that you control with your smartphone or computer. More recently we’ve seen more complex OBD-II head-up-diplays, and boards such as Macchina M2 open-source hardware OBD-II board that takes various XBee modules for 4G, Ethernet, WiFi, Bluetooth, GPS, and so on. iWave Systems, a company better known for their system-on-modules, has now unveiled their own OBD-II dongle with NXP i.MX 6UL processor running Linux, and integrating 4G LTE and GPS by default. iWave Systems OBD-II dongle specifications: Processor – NXP i.MX 6UL ARM Cortex-A7 processor @ 528/696MHz Memory – 256 MB DDR3 (Optionally upgradeable to higher capacity) Storage – 256 MB NAND Flash (optionally upgradeable to higher capacity). Connectivity – Built-in 4G Modem with antenna, optional WiFi & Bluetooth 4.0 LE module Positioning – […]
Dragino OLG01 Outdoor Single Channel LoRa Gateway Runs OpenWrt, Supports Passive PoE
Dragino Technology, a Shenzhen based startup focusing on the Internet of Things, had already designed LoRa shields & Hats for Arduino & Raspberry Pi boards which can be useful for LoRa nodes, but the company has now launched Dragino OLG01 LoRa gateway running OpenWrt that communicates with nodes over LoRa, and to the cloud using WiFi, Ethernet, or 3G/4G. Dragino OLG01 specifications: WiSoC – Atheros AR9331 MIPS processor @ 400MHz System Memory – 64MB RAM Storage – 16MB flash MCU – Atmel ATMega328P AVR MCU with 32KB flash, 2KB SRAM Connectivity 802.11 b/g/n WiFi with antenna 2x 10/100M Ethernet with support for passive PoE Optional 3G/4G module connected to internal USB socket (TBC) Semtech SX1276/78 LoRa wireless module + SMA connector (antenna not provided) up to 5~10 km range USB – 1x USB 2.0 host port Power Supply – 12V DC power jack or PoE Three models are offered with […]
Quectel SC20 Smart LTE Modules with WiFi, BLE and GPS Run Android 5.1
Google may just have released Android Things operating systems for IoT applications, but its big brother – Android – has already gotten into some other IoT systems such as Quectel SC20 module powered by a Qualcomm processor and supporting LTE, WiFi, Bluetooth LE, and GNSS functions. Quectel SC20 comes in different flavors to cater for various markets, but all module share most of the same specifications: SoC – Unnamed Qualcomm processor System Memory – TBD Storage – 8GB flash Cellular Connectivity – FDD LTE, TDD LTE, TD-SCDMA, EVDO/DCMA, WCDMA, and GSM; antenna: MIMO 2×2, supports Rx-diversity Other Wireless Connectivity WiFi – 2.4GHz 802.11b/g/n (SC20-CE/-W); Dual band 802.11a/b/g/n/ac (SC20-E/-A/-AU/-J) Bluetooth 2.1+EDR/3.0/4.1 LE GNSS – GPS, GLONASS, and BeiDou Interfaces LCD – 4x lanes MIPI-DSI, 1.5Gbps each, HD (720p) @ 60fps Camera – MIPI-CSI, up to 1.5Gbps per lane, supports two cameras 2-lane MIPI_CSI for rear camera, up to 8MP 1-lane MIPI_CSI […]
SDMC DV8219-LTE Android TV Box Comes with a Built-in 4G LTE Modem
Most users connect their TV boxes to the Internet through WiFi or Ethernet, but in some specific use case, such as digital signage in mass transport or in remote locations, it might be useful to get access to cellular networks. We’ve seen a few Android TV boxes with a built-in 3G modem in the past including CS918S and MBX-3G, but the former is based on the rather old Allwinner A31s processor, and the latter did not raise enough found on Indiegogo. But there’s nothing new, as SDMC DV8219-LTE is a more recent TV box powered by Amlogic S905X processor and running Android 6.0, equipped with a 4G LTE modem. SDMC DV8219-LTE TV box specifications: SoC – Amlogic S905X quad core Cortex A53 processor @ up to 1.5 GHz with a Mali-450MP GPU System Memory – 1GB DDR3 SDRAM (2GB as option) Storage – 8GB eMMC flash (4 to 64GB as […]
The First 4G Tizen Smartphone, Samsung Z2, To Launch in India for $68
After Samsung Z1, and Samsung Z3, Samsung defied “mathematical incrementation wisdom”, and launched Samsung Z2 Tizen smartphone, which happens to be the very first Tizen phone supporting 4G networks. Tizen Z2 is definitely an entry level smartphone as the specification show: SoC – Spreadtrum SC9830i quad core Cortex A7 processor @ 1.5 GHz with Mali 400MP2 GPU System Memory – 1GB RAM Storage – 8GB flash + micro SD slot up to 128GB Display – 4″ WVGA TFT display Cellular Connectivity – 4G LTE Cat.4 Camera – 5MP rear camera with LED flash, 0.3MP front camera Battery – 1,500 mAh battery The device caters to the Indian market with Samsung’s ‘Make for India’ features such as the “Ultra Data Saving mode, S bike mode and the new My Money Transfer”. The phone also includes a preview version of Jio services to access music and videos on demand. Samsung Z3 will be […]
Monohm Runcible is Some Sort of Huge Round Watch Usable as a Phone or Tablet (Crowdfunding)
I like to write about innovative products here on CNX Software, but it’s not easy to understand why Monohm Runcible, that can be seen as a round phone/table or a huge watch, ever came to existence. But who knows maybe people will find uses, and it’s rather cool looking with its round display and nature themed wooden or stone back covers. Runcible thing specifications: SoC – Qualcomm Snapdragon 410 quad core Cortex-A53 processor @ 1.2GHz, with Adreno 306 GPU and Hexagon v5 DSP System Memory — 1GB LPDDR3 RAM @ 533MHz Storage – 8GB eMMC 5.0 flash Display — 2.5″ circular 640 x 640 display (256dpi) Audio – 1x analog in/out jack with other I/O audio interfaces on main board Connectivity – 802.11b/g/n WiFi,Bluetooth 4.1, Qualcomm IZat Gen 8C GPS/GLONASS, and “hopefully” 4G/LTE data Camera – 7 MP rear camera (up to 13-megapixels for hackers) USB – USB 2.0 client/host […]