3dmark News - Page 15 of 21 - CNX Software

February 5, 2017September 24, 2017 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

CHUWI LapBook 14.1 Apollo Lake Laptop Review – Part 2: Windows 10 Benchmarks, User Experience, and Battery Life

CHUWI LapBook 14.1 is the one of the first Apollo Lake laptop on the market. It features a 14.1″ IPS display, a Celeron N3450 quad core processor, 4GB RAM and 64 GB storage. The company has sent me a sample for review, and I had already check out the hardware in “CHUWI LapBook 14.1 Apollo Lake Laptop Review – Part 1: Unboxing & (Partial) Teardown“, so since then I’ve played with it including checking emails & news, writing a blog post on CNX Software, and watching some YouTube videos, as well as running benchmarks and estimating battery life, so I’ll report about my experience with the laptop in the second part of the review. CHUWI LapBook 14.1 System Information LapBook 14.1 runs an activated version of Windows 10 Home 64-bit on an Intel Celeron 3450 “Apollo Lake” quad core processor @ 1.1 GHz / 2.2 GHz with 4 GB RAM […]

January 27, 2017July 12, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Voyo VMac Mini mini PC Benchmarks with Intel Celeron N3450 Apollo Lake Processor

Following up yesterday’s post about Voyo VMac Mini mini PC benchmarks with Intel Pentium N4200 processor, I’ve switched to its cheaper little brother powered by Intel Celeron N3450 processor and performed the same benchmarks to compare the performance difference with the Pentium version, as well as older Braswell and Cherry Trail systems. I’ve run HWiNFO64 before running the benchmarks to get more details about computer, and especially the processor. Celeron N3450 is a quad core processor clocked at 400, 800, and 1,100 MHz, and up to 2.2 GHz in burst mode. It’s quite similar to Pentium N4200, except the later has a higher burst frequency (2.5 GHz), and a better GPU with 18 EU, instead of just 12 EU on the Celeron. My exact version of the processor is stepping B0/B1 with sSPEC SR2YA/SR2Z6. I forgot to comment about supported features compared to Cherry Trail and Braswell processors yesterday, and […]

January 26, 2017February 7, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Voyo VMac Mini mini PC (Intel Pentium N4200) Benchmarks

Since I’ve now received Intel Apollo Lake hardware with Voyo VMac Mini mini PCs, I’ve going to run some benchmarks with Pentium N4200 and Celeron N3450 processor to compare the performance against older generation low power mini PC based on Braswell and Cherry Trail processors. I’ll get started with the Pentium N4200 version that’s both more expensive and powerful. But before starting with the benchmarks, I’ve run HWiNFO64 to get a bit more info about the system, and the processor in particular. The processor is the quad core Pentium N4200 stepping B0/B1 with sSPEC SR2Y9/SR2Z5 clocked between 400 and 1,100 MHz, and up to 2,5 GHz in burst mode. It also comes with a 18 EU HD graphics Gen9-LP. IMHO, PCMark 8 Home Accelerated 3.0 is one of the best benchmark as it replicates typical use cases such as web browsing, video conference, light gaming, photo editing, and so on. […]

January 12, 2017January 12, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Mecool BB2 Pro Review – TV Box with DDR4 Memory – Part 2: Android Firmware, Benchmarks, Kodi

Most Android TV box comes with DDR3 or DDR3L memory, but Mecool BB2 Pro comes instead with 3GB DDR4 memory that’s supposed to offer 50% increased memory bandwidth. That’s why I was interested in reviewing the box. I’ve already checked out BB2 Pro hardware in the first part of the review, so the second part will focus on the firmware, video playback in Kodi 17, and benchmarks to find out if there’s any improvement over other Amlogic S912 using DDR3 memory. It’s not the first DDR4 box I’ve tested however, as Eweat R9 Plus powered by Realtek RTD1295 processor also included DDR4 memory, but based on my tests, there’s was no noticeable differences with Zidoo X9S based on the same processor, but with DDR3 memory. But this time, we’ll see if it is any different with Amlogic platforms. First Boot, Settings and First Impressions I connect a USB 3.0 hard […]

December 24, 2016March 4, 2017 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

Eweat R9 Plus TV Box Review Part 2 – Android, OpenWrt, and HDMI Recording

Eweat R9 Plus is a device powered by Realtek RTD1295 SoC combining main functions: Android 6.0 TV box, OpenWrt NAS/router, and HDMI recorder thanks to its HDMI input port. It competes directly with Zidoo X9S which has the same features, except while Zidoo X9S has no internal SATA bay and your 2.5″ hard drive just hang outside the box, Eweat R9 Plus comes with an internal 3.5″ SATA bay that makes it much neater on your furniture… We’ve already seen that in the first part for review “Eweat R9 Plus unboxing and teardown“, and I was impressed by the hardware, but the software is even more important, and that’s what I’m going to check out in the second and final part of this review. First Boot, First Impressions and Setup. I’ve first inserted a 1TB 3.5″ SATA drive in the device, and then I connected an extra USB 3.0 hard […]

December 6, 2016December 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

First Intel Apollo Lake J3455/J4205 Processor Benchmarks & Video Tests

Many products powered by Intel Apollo Lake processors have already been announced, but few are actually shipping, and I have yet to get one here. However, AndroidPC.es got hold of ASRock J4205-ITX and J3455-ITX motherboards powered by respectively a Pentium J4205 quad core processor and a Celeron J3455 quad core processor, run a few benchmarks, and tested videos in Windows 10 on the motherboards with Kodi 17 and MPC-HC. Let’s have a look at some of the benchmarks to better understand of what we can expect from Apollo Lake desktop processors. First there’s not that much of a difference between Celeron J3455 (1,771 points) and Pentium 4205 (1,830 points) in PCMark Home Convetional benchmark, however you should clearly feel a boost in performance compared to systems with Intel Cherry Trail x5-Z8300 processor (1,141), and the score is getting fairly close to a mini PC with an Intel Core i3-5005U […]

September 19, 2016January 3, 2018 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Amlogic S905 vs Amlogic S912 Benchmarks Comparison

Amlogic has unveiled three new processors this year with Amlogic S905X, S912 and S905D. The latter is not found in devices yet, we’ve seen Amlogic S905X is a bit slower than Amlogic S905, but surely Amlogic S912 with eight Cortex A53 cores and its “multi-core high performance 3D GPU”, namely ARM Mali-T820MP3 must deliver a significant boost in performance. I now have full benchmarks results for two devices: M12N MXQ Plus and Qintaix Q912. M12N is the fastest devices of the two according to benchmarks, and I’ve been told YokaTV KB2 has about the same Antutu score (41K points) as M12N, so I feel confident enough that we have relevant benchmark’s results to compare Amlogic S912 and Amlogic S905 performance using M12N (MXQ Plus) and MINIX NEO U1 TV boxes. The comparison table below contains scores for Antutu 6.x, Vellamo 3.x, and 3DMark Ice Storm Extreme. MINI NEO U1 runs […]

September 18, 2016November 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Qintaix Q912 Android Box Review – Part 2: Android 6.0, Kodi 17, Benchmarks, etc…

Qintaix Q912 is one of the many octa-core Android boxes based on Amlogic S912 processor. I’ve already shown photos of the device and its internal design in the first part of Qintaix Q912 review, so today I’ll report the results of my testing with Android firmware, video & audio capabilities in Kodi 17 Alpha 3 (pre-installed), features supports, benchmarks, and other comment. I will also be interesting to find out how it compares to M12N TV box, also based on Amlogic S912 processor. First Boot, Settings, and First Impressions I’ve connected all necessary cables including HDMI and Ethernet, added some USB devices including two 2.4 GHZ USB dongles for my air moues and wireless gamepad, a USB keyboard to take screenshots, and a USB 3.0 hard drive to the USB 2.0 ports of the device. Once you apply power, the LED is turn red, and you need to press the […]