3d News - Page 2 of 6 - CNX Software

August 18, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Orbbec Femto Bolt 3D depth and RGB USB-C camera supports Microsoft ToF technology

Orbbec Femto Bolt is a 3D depth and RGB USB-C camera developed in collaboration with Microsoft and integrating the same ToF (Time-of-Flight) technology as found in the Microsoft Azure Kinect camera module and HoloLens 2 mixed reality head-mounted display. The new model follows the launch of the fully integrated Femto Mega featuring an NVIDIA Jetson Nano module introduced in January with the same ToF technology, so the new USB-C camera simply allows a wider selection of hosts. Orbbec has also launched the Femto Mega I variant with an IP65 metal enclosure. Orbbec Femto Bolt specifications: Cameras Depth camera 1 Mega Pixel ToF sensor 850nm wavelength 0.25 to 5.45m range depending on the depth mode Up to 1024×1024 @ 15 fps (WFoV) or 640×579 @ 30 fps (NFoV) FoV Wide – H: 120°; V: 120° Narrow – H: 75°; V: 65° RGB camera 4K resolution up to 3840×2160 @ 25 fps […]

January 18, 2023January 19, 2023 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Teledyne e2v releases Hydra3+ high-resolution ToF sensor with 832 x 600 resolution

Teledyne e2v Hydra3D+ is a high-resolution Time-of-Flight (ToF) CMOS image sensor with 832 x 600 resolution, designed for real-time 3D detection and measurement without motion artifacts. The first ToF sensor I used was an STMicro VL53L0X ranging sensor that could measure distances accurately and quickly up to 2 meters away, then the company started to launch multi-zone ToF ranging sensors such as the VL53 that enabled new features such as touch-to-focus, multiple-target identification, flash dimming, or video tracking assistance, and one variant used for human detection. But the 832×600 resolution of Hyrdra3D+ brings even more interesting use cases with the ability to create 3D maps in real time. Hydra3D+ ToF sensor specifications: Sensor Resolution – 832 x 600 pixels Aspect Ratio – 4 : 3 Size type – 2/3″ (10.3 mm diagonal) Pixel type/size – square – Three-tap global shutter – gated global shutter / 10 μm Maximum frame rate […]

January 6, 2023November 2, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Orbbec Femto Mega 3D depth and 4K RGB camera features NVIDIA Jetson Nano, Microsoft ToF technology

Orbbec Femto Mega is a programmable multi-mode 3D depth and RGB camera based on NVIDIA Jetson Nano system-on-module and based on Microsoft ToF technology found in Hololens and Azure Kinect DevKit. As an upgrade of the earlier Orbbec Femto, the camera is equipped with a 1MP depth camera with a 120 degrees field of view and a range of 0.25m to 5.5m as well as a 4K RGB camera, and enables real-time streaming of processed images over Ethernet or USB. Orbbec Femto Mega specifications: SoM – NVIDIA Jetson Nano system-on-module Cameras 1MP depth camera Precision: ≤17mm Accuracy: < 11 mm + 0.1% distance NFoV unbinned & binned：H 75°V 65° WFoV unbinned & binned：H 120°V 120° Resolutions & framerates NFoV unbinned: 640×576 @ 5/15/25/30fps NFoV binned: 320×288 @ 5/15/25/30fps WFoV unbinned: 1024×1024 @ 5/15fps NFoV binned: 512×512 @ 5/15/25/30fps 4K RGB camera FOV – H: 80°, V: 51°b D: 89°±2° Resolutions […]

September 18, 2022February 15, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Luxonis OAK-D series 2 USB and PoE cameras integrate 3D depth and AI for robotics applications

Luxonis OAK-D Series 2 are the second-generation of USB or PoE cameras with 3D depth and a built-in AI accelerator mostly used for computer vision in robotics applications. We first wrote about Luxonis’ DepthAI module for Raspberry Pi based on the Intel Myriad X AI accelerator in 2019, and later found the module integrated into OpenCV AI Kit Lite, aka OAK-D Lite camera. The second-generation OAK-D cameras replace the module with a Robotics Vision Core 2 (RVC2) “chip-down design” equipped an SoC and Myriad X AI accelerator for up to 4 TOPS of processing power, including 1.4 TOPS for AI inference. Luxonis OAK-D Series 2 specifications and features: Robotics Vision Core 2 based on Myriad X AI accelerator 4 TOPS of processing power (1.4 TOPS for AI) Video encoding – H.264, H.265, MJPEG @ 4Kp3, 1080p60 Computer vision – Warp/dewarp, resize, crop via ImageManip node, edge detection, feature tracking, custom […]

September 1, 2022September 2, 2022 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Arducam ToF camera adds depth sensing to Raspberry Pi for $30 (Crowdfunding)

Arducam has launched of Time-of-Flight (ToF) camera module for Raspberry Pi that enables depth sensing by capturing 3D data (at 240×180 resolution) at a distance of up to 4 meters. Arducam has launched several cameras for Raspberry Pi boards over the years, more recently the Arducam Pi HawkEye 64MP camera, but the Arducam ToF camera is quite different, as while it still connects to the MIPI CSI connector of the SBC, it is used to measure distances and depth and display 3D data. Arducam ToF camera specifications: Compatibility – Any Raspberry Pi board with a MIPI CSI connector Effective number of pixels – 240×180 Frame Rate Up to 120 fps (sensor) Up to 30 fps (when processed by a Raspberry Pi using 4-phases RAW frames) Sensor size – 1/6-inch Modulation Frequency – 75MHz/37.5MHz Viewing Angle – 70° Diagonal Light Source – 940nm VCSEL illuminator Output Formats 4-phases RAW Frame Depth […]

July 29, 2022July 29, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Altium Designer adds 3D PCB layout tool

While we like open-source tools such as KiCAD, Altium has added a pretty cool feature to the Altium Designer program with a 3D layout tool, which as its name implies, allows the design of 3D PCBs… The new 3D layout tool relies on 3D-MID technology that combines electrical circuits with three-dimensional mechanical parts. I’m not sure who really needs this, but I have to admit the results look pretty neat. Altium explains the design process is quite similar to standard 2D PCBs, and designers would create a layout on the surface of a 3D substrate using the standard library components and with the connectivity driven by the schematic design in the same way as with a standard PCB. You can check out how it works in a video shared on Altium’s LinkedIn account. The designer would then export the files in the format required by LPKF Laser & Electronics AG’s […]

June 22, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Orbbec Femto ToF camera enables accurate 3D object and scene capture

We’ve written a couple of articles about Time-of-Flight (ToF) technology in recent weeks notably about ranging sensors such as VL53L8 dToF sensor and Toppan hybrid ToF sensor, but Orbbec has used the technology in their Femto camera line designed to capture 3D objects and scenes. The Femto 3D cameras support a depth-of-field (DoF) from 0.2 to 5 meters, multi-camera synchronization, can be used in complete darkness, and are equipped with a 6-Axis IMU tracking sensor for motion tracking. The ToF cameras should find their way into applications for healthcare, warehousing/shipping, autonomous robotics, augmented reality, and other sectors. Three models are available with the following highlights: Femto – 0.2 to 5 meters optical range with a depth resolution of 640 x 480 @ 30fps, and 5.8W power consumption. 99.4 x 68 x 25mm form factor. Femto W – Wide depth field of view (H90, V74) and color field of view (H98.6, […]

May 27, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

DepthVista USB 3D ToF camera supports close range depth measurement, far-range object detection

DepthVista is a USB Time-of-Flight (ToF) camera designed for precise 3D depth measurement in close range mode (1.2m) and person and/or object detection in far-range mode up to 6 meters away. This ToF camera combines a 3D depth camera capable of 640 x 480 @ 30fps, and an Onsemi AR0234 color global shutter sensor supporting HD and FHD at up to 30fps, plus an 850nm VCSEL (vertical-cavity surface-emitting laser) for safety and the ability to operate in complete darkness. e-con Systems’ DepthVista (See3CAM_TOF_25CUG) specifications: Depth camera 3D camera technology: Time-of-Flight Depth range Near mode – 0.2m to 1.2m Far mode – 1m to 6m Illumination: 850nm pulsed laser (Indoor) Accuracy: Up to 1% depending on environmental conditions Output format: Y16 (raw 12-bit) Resolutions Depth – 640 x 480 @ 30fps IR – 640 x 480 @ 30fps Depth + IR – 640 x 960 @ 30fps FOV – 84.29° (H) […]