Video Category - Page 53 of 323 - CNX Software

April 20, 2022April 20, 2022 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Volla Phone 22 runs Ubuntu Touch or a Google-free Android OS (Crowdfunding)

Volla Phone 22 is a 6.3-inch smartphone powered by a MediaTek Helio G85 processor that focuses on privacy and runs either Ubuntu Touch from UBPorts, Volla OS Android fork without Google Play services or apps (YouTube, Gmail, etc…), or others operating through a multi-boot. Hardware-wise, the Volla Phone 22 is a mid-range smartphone with 4GB RAM, 128GB storage, and it also comes with features not found on most recent smartphones including a user-replaceable battery, a 3.5mm audio jack, and a microSD card socket. Volla Phone 22 specifications: SoC – Mediatek Helio G85 octa-core processor with Arm Cortex-A75 cores @ up to 2.0 GHz, Cortex-A55 cores @ up to 1.8 GHz, Arm Mali-G52 MC2 GPU up to 1.0 GHz System Memory – 4GB RAM Storage – 128GB eMMC flash, microSD card socket Display – 6.3-inch Full HD display with 410 ppi pixel density. Audio – 3.5mm jack, built-in microphone and speaker […]

April 18, 2022April 30, 2022 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

FOMO (Faster Objects, More Objects) enables real-time object detection on low-end embedded systems

FOMO used to stand for “Fear Of Missing Out” in my corner of the Internet, but Edge Impulse’s FOMO is completely different, as the “Faster Object, More Objects” model is designed to lower the footprint and improve the performance of object detection on resource-constrained embedded systems. The company says FOMO is 30x faster than MobileNet SSD and works on systems with less than 200K of RAM available. Edge Impulse explains the FOMO model provides a variant between basic image classification (e.g. is there a face in the image?) and more complex object detection (how many faces are in the image, if any, and where and what size are they?). That’s basically a simplified version of object detection where we’ll know the position of the objects in the image, but not their sizes. So instead of seeing the usual bounding box while the model is running, the face position will be […]

April 14, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Getting started with Maker Nano RP2040 using CircuitPython: Blinky, RGB LED, and Piezo Buzzer

CNXSoft: This getting started guide was initially posted in Thai language by Suthinee Kerdkaew, and I’ve just translated her work into English with some minor edits. As discussed in an earlier article, Maker Nano RP2040 is a board following the Arduino Nano form factor, but with a more powerful Raspberry Pi RP2040 microcontroller. The board also comes with plenty of LEDs, as well as two RGB LEDs, and a piezo buzzer for audio output. Mr. Jean-Luc Aufranc has just given me a Maker Nano RP2040 board received from Cytron for review. I’ve never used a board before, so it’s my first experience, and in this article, I’ll try to program Maker Nano RP2040 with CircuitPython with three demos: a blinky sample, changing the color of the RGB LEDs, and playing a melody through the piezo buzzer. Let’s see if I can do it. Let’s get started. I first downloaded the […]

April 10, 2022April 14, 2022 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Apcsilmic Dot 1 – A Windows 11 Arm mini PC powered by Snapdragon 7c SoC

Apcsilmic Dot 1 is an affordable Snapdragon 7c powered Windows 11 Arm Mini PC that offers an alternative to ECS LIVA Mini Box QC710 Desktop Snapdragon 7c developer kit with extra features and resources. The Dot 1 mini PC comes with up to 8GB RAM, up to 256GB storage, dual HDMI output, as well as optional 4G LTE connectivity. It’s also thinner and remains fanless. Apcsilmic Dot 1 Mini PC specifications: SoC – Qualcomm Snapdragon SC7180 (Snapdragon 7c) with octa-core Qualcomm Kryo 468 (2x Cortex-A76, 6x Cortex-A55) CPU @ up to 2.4 GHz, Adreno 618 GPU Memory & Storage options 4GB RAM + 64GB storage 6GB RAM + 128GB storage 8GB RAM + 256GB storage MicroSD card on all variants Video Output – 2x HDMI ports up to 2K resolution (2560×1440) Audio – 3.5mm MIC jack, 3.5mm stereo audio jack Networking 10/100M Ethernet Dual-band WiFi 5, Bluetooth 5.1 with SMA […]

April 7, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

SmartKnob View is a DIY haptic input knob with WiFi and Bluetooth connectivity

Soon after writing about RoenDi rotary encoder with a built-in color display, readers pointed me to SmartKnob View, a similar-looking project but featuring an ESP32 module for WiFi and Bluetooth connectivity, plus software-configurable end-stops and virtual detents. The latter is enabled through a brushless gimbal motor paired with a magnetic encoder to provide closed-loop torque feedback control. Just like RoenDi, SmartKnob View comes with a 240×240 round color display but adds tactile feedback so you can change the menu when pressing the display. SmartKnob View specifications: Wireless module – LilyGO Tmicro32 Plys based on ESP32-PICO-V3-02 WiFi and Bluetooth LE SoC (May be changed to ESP32-S3-MINI-1 to enable USB HID support, once Arduino core supports it) Display – GC9A01 1.28-inch 240×240 round LCD covered by a 39.5mm watch glass on rotor Motor – BLDC gimbal motor, with a hollow shaft for mechanically & electrically connecting the LCD USB – 1x USB […]

April 7, 2022April 8, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

AnkerMake M5 3D printer comes with AI camera, prints at up to 300mm/s (Crowdfunding)

Anker is better known for its charger and power banks, but the company has now entered the 3D printer market with the AnkerMake M5 3D printer which is said to print five times faster and comes with an AI camera for monitoring the prints. Besides the up to 300mm/s printing speed, other highlights of the 3D printer include Google Assistant & Amazon Alexa voice assistant compatibility, and easy assembly that requires 3 steps done in about 15 minutes. AnkerMake M5 3D printer specifications: SoC – Ingenic X2000 tri-core MIPS processor with 2x XBurst cores @ 1.2 GHz plus one XBurst0 core @ 240 MHz running Linux MCU – STM32F407 running Marlin firmware Print volume (L x W x H) – 235 × 235 × 250 mm Standard speed – 250 mm/s Speed range – 50 – 300 mm/s Acceleration speed – 2500 mm/s² X-axis movement – 42 – 40 stepper […]

April 6, 2022 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

RoenDi is a rotary encoder with a color display (Crowdfunding)

RoenDi is a rotary encoder with an integrated round color display. Based on an STM32L4 MCU, it can be programmed with the STM32CubeIDE or the Arduino IDE, and be used as an information display, an IoT controller, a locking mechanism, as well as in audio applications. RoenDi specifications: MCU – STMicro STM32L433 Arm Cortex-M4 microcontroller @ 80 MHz with 256 KB flash memory Storage – 128 Mbit SPI NOR flash Display – Round 1.28-inch TFT LCD display with 240 x 240 resolution, up to 262K colors Rotary Encoder – 15 pulses / 30 detents USB – Micro USB connector I/Os – Breakout pads for peripherals: I2C, GPIO, PWM, CAN; 5V tolerant Debugging – Adaptor board and cable for ST-LINK Misc – BOOT boot, RTC (built-in into STM32 MCU) Power Supply – 3V to 5V DC input, 3 V, 400 mA LDO Dimensions – 40 x 40 mm (PCB) Enclosure – […]

April 4, 2022 by Ian W MORRISON (Linuxium) - 1 Comment

Beelink SER4 Review – Windows 11, Ubuntu 20.04, and “overclocking” AMD Ryzen 7 4800U SoC

Beelink has released the SER4 which is the latest in their ‘SER’ mini PC series and it features a Zen 2 AMD mobile processor. Beelink kindly sent one for review and I’ve looked at performance running both Windows and Ubuntu and dabbled with ‘overclocking’. Beelink SER4 Hardware Overview The Beelink SER4 physically consists of a 126 x 113 x 40mm (4.96 x 4.45 x 1.57 inches) square metal case. As an actively cooled mini PC, it uses AMD’s 7 nm Zen 2 Ryzen 7 4800U Renoir processor which is an eight-core 16-thread 1.8 GHz mobile processor boosting to 4.2 GHz with Radeon Graphics. The front panel has an illuminated power button, a 3.5mm headphone jack, a Type-C USB 3.1 port with Alternate Mode, dual USB 3.1 ports, and a reset pin-hole ‘CLR CMOS’. The rear panel includes a gigabit Ethernet port, a USB 3.1 port and a USB 2.0 port, […]