Scanadu Scout Medical Tricorder for Android and iOS

Low cost personal medical tricorders have the potential to dramatically bring down the cost of health care, and avoid unnecessarily wasted time in hospitals, which is probably the XPRIZE Foundation has launched a competition for  medical tricorders, where the winners will get 10 millions US dollars in funding. Scanadu Scout is one of the entry, and they currently have an indiegogo campaign, already oversubscribed, for their medical grade tricorder which gather data by placing it on your forehead for 10 seconds, and display medical data transferred via Bluetopoth Low Energy (Bluetooth SMART) on your iOS and smartphone. The company did not disclose full specifications, but they still revealed the device runs 32-bit Micrium RTOS, which is already FDA approved (pre-market 510K notification and PMA approval), it supports Bluetooth 4.0 SMART, and a micro USB port is included to recharge the battery. I fired up few Google image searches to look […]

Asus Launches Memo Pad HD7 Tablet Powered by Mediatek MT8125

Just about 5 days after Mediatek announcement of their quad core Cortex A7 SoC for tablets, Asus unveiled the Memo Pad HD7, and Android 4.2.2 tablet powered by MT8125, at Computer 2013. The device will be available for just $129 with 8GB flash for developing markets, and for $149 with 16GB Flash worldwide. Asus low cost quad core tablet comes with the following specifications: SoC – Mediatek MT8125 quad core Cortex A7 + PowerVR SGX544 GPU System Memory – N/A Storage – 8 or 16 GB NAND Flash + micro SD Display – 7″ IPS display with 1280×800 resolution, and 10 point capacitive touchscreen. Connectivity – Wi-Fi 802.11 b/g/n, Bluetooth 4.0 and GPS Camera – 5MP rear camera and 1.2MP front camera. USB – micro USB port Audio – Stereo speakers Battery – N/A mAh, said to last 10 hours. Weight – 302 grams Dimensions – 10.8mm thick It looks […]

Emcraft Systems STM32F4 SoM and Starter Kit Run uCLinux From On-Chip Flash

Emcraft has recently announced a new system-on-module based on STMicro STM32F437 Cortex M4 micro-controller, as well as a starter kit based on the module that can run uCLinux directly from STM32F437’s 2MB on-chip flash, allowing a faster boot time, and AFAIK, this is the only Linux-ready STM32 platform available on the market. Here are the specifications of Emcraft Systems SOM-STM32F4: MCU – STMicro STM32F437 Cortex M4 @ 168 MHz with 256KB RAM and 2MB flash External Memory – 16MB PSRAM External Storage – 16MB NOR Flash Ethernet PHY (Optional) Connectors – 2x SoM Connectors with access to I/Os: USB, Ethernet, I2C, SPI, UART, LCD I/F, ADC, DAC, GPIO… Dimensions – 30 mm x 46 mm To speed-up development and for evaluation, the company also provides a starter kit composed of the STM32F4 SoM, and a baseboard (SOM-BSB-EXT) with the following main features: USB interface using USB-UART bridge connected to UART […]

$25 Texas Instruments SensorTag is a Bluetooth LE Devkit with 6 Sensors

Yesterday, I wrote about Wimoto Motes, tiny Bluetooth LE devices with several sensors that can be controlled and monitored via an iOS app, and soon by an Android app, as well as Linux devices. Each mote costs $39 plus shipping, and one commenter mentioned the price may be a bit too high. A Google search for “bluetooth sensor” immediately brings TI SensorTag, which looks somewhat similar, except it is a Bluetooth LE development kit, includes 6 sensors (but no light sensor), and only costs $25 including shipping. SensorTag Specifications: Bluetooth 4.0 low energy (CC2541) SoC 6 sensors connected via I2C: IR Temperature sensor (TI TMP006) Humidity sensor (Sensirion SHT21) Pressure sensor (Epcos T5400) Accelerometer (Kionix KXTJ9) Gyroscope (InvenSense IMU-3000) Magnetometer (Freescale MAG3110) Power – Single cell coin cell battery (CR2032), quiescent current consumption of 8uA, allowing years of battery life. FCC, IC and ETSI certified solution Dimension – 71.2x36x15.5 mm, […]

$32 iPush Wi-Fi DLNA / Miracast Adapter for Android

Last time I wrote about Miracast / DLNA dongles, the price was about $55, but today I’ve found a new device closer to my target price ($25) with IPUSH Miracast adapter that sells for $31.90 on DealExtreme. [Update: Several users report it’s only a DLNA dongle, and it does not support Miracast yet] Here are the specifications according to DealExtreme: SoC – Allwinner A10s Cortex A8 + Mali-400 GPU Wi-Fi 802.11b/g/n USB – 1x micro USB port for power Video Output – HDMI 1.4 Supports DLNA and Miracast mode Power – 5V / 0.5A The device comes with an HDMI cable and a micro USB cable used to connect the device to your TV HDMI and USB ports, or if your TV lacks USB, a USB power adapter. However, I’ve done a little more research, and it turns out iPush is also a product designed by Action Semi, that just […]

Wimoto Motes are Tiny Bluetooth Sensors for iOS, Android, and Linux Devices

Wimoto Motes are small (30x30x8mm) wireless sensors that communicate temperature, humidity, soil moisture… values to your iPhone, iPad, Android, and Linux (yes, including the Raspberry Pi) devices via Bluetooth. They are said to last for about a year on a single CR2032 battery and don’t require an Internet connection to work, but you can still upload your data to Wimoto cloud service via the app, or use an optional mote.cloud bridge to do it for you in realtime via Wifi. There are currently 4 Motes: Climote – Measures light (0 to 60,000 lux), temperature (-25 to 85 C) and humidity. Used to monitor a room environment (bedroom, cellar, greenhouse,…), and tell you if you need to make adjustment Growmote – Measures sunlight (0 to 60,000 lux), soil moisture (5 levels) and temperature (-25 to 85 C), to make sure your lawn or flowers are not  thirsty. Thermote – Measures an object temperature […]

Aithon Motor Control Board Runs Chibios/RT RTOS

The Aithon board is a board powered by an STM32 Cortex M4 MCU destined at controlling motors and robotics applications. The board runs Chibios/RT, an open source RTOS, and a set of libraries are also provided to make programming the 2-channel motor driver, and other peripherals/sensors easier. Here are the specifications of the board: MCU – STMicroelectronics STM32F407 ARM Cortex-M4 @ 168 MHz, FPU, 512KB flash and 192KB RAM, up to 17 timers, an RTC, and 12-bit ADC I/O (All digital I/Os are 5V tolerant): 15 GPIO 8 ADC inputs and 8 PWM servo outputs Up to 3 USART (one shared with 1 I2C port + XBee) Up to 4 I2C (split between two independent buses) 1 SPI header 1 SWD header 1 12-bit DAC output (shared with SPI SCLK) USB – mini-USB (device) and standard USB (host) ports Expansion Headers: XBee socket Bluetooth header for optional Roving Networks RN42 […]

The Smarter Phone is Upgradeable Just Like a PC

The “Smarter Phone“, which is just a concept right now, would allow users to easily upgrade or repair it by changing key modules. Your phone currently has a 5MP camera, and you’ll like to upgrade for a 12MP. No problem, just replace the camera module. We’re now in 2016. The quad core processor in your smartphone feels really slow, and memory is tight, so you’d like to replace it with the latest Exynos 7 20-core processor with extra-large.big.medium.little.tiny processing technology, and finally get 8GB RAM. You can do so by just updating the CPU module, and on and on. Basically, your smartphone would be just as upgradeable as your PC, which is probably timely since in a couple of years, your phone may become your PC. This concept designed by Bernat Lozano (Product Designer), and Rocío García (Architect & Product Designer), would help save consumers’ money, and reduce e-waste, as they […]

Exit mobile version
Youyeetoo X1 x86 SBC