Video Category - Page 242 of 330 - CNX Software

March 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Firefox OS Ported to MIPS Based Tablet (Ingenic JZ4780)

Imagination has announced that an experimental version of Firefox OS has been ported to a reference tablet powered by Ingenic JZ4780, a MIPS based processor, that’s also used in MIPS Creator CI20 development board, and that the company organized a raffle to send 15 of these tablets for people to try or develop on. The tablet is said to cost less than $100, runs either Firefox OS or Android 4.4 KitKat, and comes with the following specifications: SoC – Ingenic JZ4780 dual core MIPS32 processor @ 1.2 GHz with Imagination PowerVR SGX540 GPU. 32kI + 32kD per core, 512K shared L2. System Memory – N/A Storage – N/A Display – 9.7” screen; 1024 x 768 resolution Video Output – mini HDMI port Audio – Headphone jack, stereo speakers, microphone Connectivity – 802.11 b/g/n Wi-Fi, Bluetooth 4.0 USB – 1x Micro USB port Camera – Front and rear cameras Misc – […]

March 23, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

XBAND is a Tiny $10 Bluetooth Low Energy Sensor Module (Crowdfunding)

ZX Tek‘s XBAND is a board about half the size of a micro SD that comes with a Bluetooth LE radio and a 6-axis MPU6500 motion sensor that can be integrated into wearables and IoT applications such as a remote controlled robot with a camera., a wireless smart light-bulb, and iBeacon device and so on. There seems to be two versions of the module XBAND 061-N51822 and XBAND 1018-CY8C4247 with the following specifications: SoC (one or the other) Nordic Semiconductor nRF51822 ARM Cortex M0 MCU @ 16 MHz with 256KB Flash, 16KB RAM, and Bluetooth Low Energy support Cypress PSoC4 BLE core ARM Cortex M0 MCU @ 48 MHz with 128KB flash, 16KB RAM, and Bleutooth Low Energy support Bluetooth – 4.0/4.1 with high gain ceramic chip antenna Sensors – On-board 6-axis MPU6500 motion sensor + an extra configurable sensor (not idea what that is…). Connectors – Board-to-board connectors with […]

March 17, 2015March 17, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Neptune Suite Includes a Smartphone, Tablet, and HDMI Stick Powered by a Smartwatch (Crowdfunding)

The makers of Neptune Pine smartwatch have unsurprisingly decided to make another smartwatch which they called Neptune Hub. Why Hub? Because although this smartwatch can be used standalone, its quadcore processor can also control a smartphone, a tablet, and an HDMI stick, probably over Miracast. So they’ve taken the opposite view to other companies in the market which are using the smartphone as the brain of your smartwatch to some extends. Neptune Hub specifications: SoC – Quad-core processor @ 1.8GHz (probably Qualcomm) System Memory – N/A Storage – 64GB eMMC Display – 2.4″ capacitive touchscreen (36mm width) Cellular Connectivity – GSM/3G/LTE with nano SIM card slot Connectivity – 802.11 Wi-Fi, 60Hz WiGig 802.11ad, Bluetooth 4.0, and GPS / A-GPS Audio – Microphone and speaker Sensors – Accelerometer, 3-axis gyroscope, digital compass, heart rate sensor, vibration motor Battery – 1,000 mAh Water resistant The watch will run Android 5.0 Lollipop, and […]

March 16, 2015March 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Iocean M6752 Octa-core Cortex A53 Android Smartphone Unboxing, First Boot, and Benchmarks

I’m quite interested in testing 64-bit ARM platform, but since mini PCs and development boards are not quite there yet, GearBest give me the opportunity to check out Iocean M6752 smartphone based on Mediatek MT6752 Octa core ARM Cortex 53 processor with 3GB RAM, 16GB flash, but running Antutu 4.4.4 (32-bit). Today, I’ll provide the complete specifications of the phone, take a few pictures, and run CPU-Z and Antutu benchmark, before writing a full review in one week or so. Iocean M6752 specifications The smartphone may have multiple versions with up 16 or 32GB storage, and 1, 2 or 3 GB RAM, but the one I received has the following specifications: SoC – Mediatek MT6752 Octa-core 64-bit ARM Cortex A53 processor @ 1.7 GHz, with ARM Mali-T760 MP2 GPU and H.265 UHD capable video processing unit. System Memory – 3GB RAM Storage – 16 GB eMMC + micro SD slot […]

March 15, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

Rikomagic MK80LE (Linux Edition) Octa-core Ubuntu mini PC

Allwinner A80 based Rikomagic MK80 Android TV box, now has a Linux sibling with Rikomagic MK80LE (Linux Edition) running Ubuntu 14.04, and allegedly supports 2D/3D graphics acceleration, and hardware video decoding. Two versions are available MK80LE with 2GB RAM & 16GB Flash, and MK80LE Plus with 4GB RAM & 32GB flash. The hardware specs are the same as the Android versions (and Tronsmart Draco AW80 Meta / Telos): SoC – AllWinner Ultra Core A80 4x Cortex 15 @ 2016 MHz, 4x Cortex A7 @ 1320 MHz big.LITTLE processor with Imagination Technologies PowerVR GC6230 GPU with support for OpenGL ES 1.1/2.0/3.0, Directx 9.3 System Memory – 2GB (MK80LE), or 4GB (MK80LE Plus) RAM Storage – 16 GB (MK80LE) or 32GB (MK80LE Plus) eMMC, external SATA port (via a USB 2.0 bridge), and micro SD slot up to 64GB Video Output – HDMI 1.4 + AV port Audio Output – HDMI, AV […]

March 12, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

(Most of) FOSDEM 2015 Videos Are Now Online

FOSDEM 2015 took place on between the 31st of January and 1st of February, and while some sessions were not recorded on videos, most of them were, and the organizers are now slowly processing and uploading 402 videos to their server. So far 210 videos have been uploaded, including the Embedded Devroom. You can follow the upload status to check out when your preferred track/devroom sessions are uploaded. For example, “internet of things” videos have not been uploaded so far, so you’d need to be a bit more patient for this topic. One of such videos is “Upstream Allwinner ARM SoC (A10 / sunxi) support status” by Hans de Goede, which includes the slides on the left and video of the right. This makes the presentation easy to follow (despite the slides being cropped), but probably explains why it takes so long to process the videos. http://video.fosdem.org/2015/devroom-embedded/allwinner_upstream__CROPPED_PRES.mp4 You can also […]

March 11, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Emcraft Systems STM32F7 ARM Cortex M7 SoM and Development Kit Run uClinux

STMicro announced their STM32F7 MCU family the same as ARM announced their latest ARM Cortex M7 core for high-end micro-controllers last September. Emcraft Systems have now launched a STM32F7 system-on-module with 32MB SDRAM and 16MB NOR flash, and ported uClinux to the platform. The company has also launched a STM32F7 starter kit for evaluation and development. Both target industrial automation, system and power management, wireless networking / sensors and other embedded applications. STM32F7-SOM-1A Module STM32F7 system-on-module specifications: MCU – STMicro STM32F746 Cortex M7 MCU up to 200 MHz with 320KB RAM, 1MB flash in TFBGA-216 package System Memory – 32MB SDRAM Storage – 16MB NOR flash Connectivity – 802.3 Ethernet PHY SoM connectors – 2x 80-pin (0.4mm pitch) Debugging – ARM SWJ-DP combined JTAG and serial wire debug port Misc – Watchdog, RTC, USB and other I/Os via SoM connectors Power – 3.3V DC; Low-power mode with short startup times; […]

March 9, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Calaos is an Open Source Home Automation Suite for Raspberry Pi, Allwinner A10/A20 and x86 Platforms

Calaos is a Linux based home automation software released under GPLv3 license that works on Raspberry Pi, some Allwinner platforms like Cubiebaord 1/2, Mele A1000(G)/A2000, as well as x86 / amd64 hardware platforms that allows you control switches & lights in the rooms of your home or office, control your music, and manage security cameras.. The developers have recently released Calaos v2.0, the first stable release, so it’s a good time to have a look. The software stack is comprised of 6 main components: Calaos Server – Daemon that exports the state of the house via a JSON protocol. It can currently manage the following hardware components and protocols: Wago’s PLC, with digital or analog I/O, DALI or DMX light bus IPX800 web relay board GCE Electronics Eco Devices used to monitor power consumption. Web API 1-Wire, X10 Zibase I/O GPIO (Linux based GPIO, for direct use of RaspberryPI GPIO […]