Video Category - Page 239 of 330 - CNX Software

April 30, 2015May 1, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

ARM: “Microcontrollers Are Better Because There’s No GPL”

[Update: ARM has pulled down the video and issued a statement] ARM has uploaded a video today entitled “Microcontrollers for Makers” showing the benefits of using micro-controller boards instead of processor based development boards such as Raspberry Pi or ODROID-C1, and their four first points are right on target, but the last one, as mentioned by Olimex, is completely wrong, and already made several people upset. Let’s go through the first four points: Micro-controllers are more energy efficient, so if your project is requires years on a cell-coin battery, MCUs are the way to go. MCU are cheaper too, now you can even get an MCU board for $1. They are smaller. The chip shown on the golf ball is Kinetis KL03 If you need real-time I/O, processors can’t beat micro-controller, that why people decide to connect an Arduino board to their Raspberry Pi, or products like UDOO Neo are […]

April 30, 2015April 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Continuum Brings Desktop Mode and Dual Display Support to Windows 10 Smartphones

I’m eagerly waiting for the day when Ubuntu convergence becomes reality, and I can run Ubuntu on a smartphone which I can also use as desktop PC. But Canonical is not the only company working on convergence and Microsoft has announced Continuum for Phones as part of Windows 10, that will bring desktop mode and support for dual independent displays to next-generation Windows 10 phones. To switch a Windows 10 smartphone to desktop mode, you’ll simply need to connect it to a desktop display, and Bluetooth keyboard and mouse, and it will automatically switch to a standard Windows 10 desktop on the big screen where you’ll be able to run apps like Microsoft Office, and other Universal Windows apps, as if it was running on an actual PC or laptop. The dual screen feature will allow you to check your emails on Outlook on a TV, while your kids watch […]

April 28, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ottobox Smart Wi-Fi Electric Socket Learns Your Schedule to Save Electricity (Crowdfunding)

There are already quite a few smart Wi-Fi electric sockets like Kankun KK-SP3, Broadlink SP2, or Orvibo Vivo S20 among others that cost between $20 and $45 shipped. They can all be controlled via an Android or iOS app either via the touch of a button, or by setting schedules, and some can also measure power consumption. But what they can’t do, is to automatically learn your schedule or habits, and detect whether you are at home or not, and that’s exactly what Ottoxbox has been designed to do. Ottobox hardware specifications: MCU – Unnamed ARM based micro-controller Connectivity – Wi-Fi and Bluetooth 4.0 Sockets and charging ports 1x 3-pin power socket 2x USB port to charge devices Misc – Multicolor LEDs Mains Voltage – Supports 120V / 220V / 230V and US & UK plug types, and possibly EU too (TBC) Dimensions – 10.80 x 3.8 x 3.8 cm […]

April 28, 2015April 28, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

ZTE ZX296702 Dual Core Cortex A9 SoC Boots Android in 10 Seconds with TuxOnice

ZTE XZ296702 is a dual core Cortex A9 processor with a Mali-400 GPU that targets Android set-top boxes and media players, and while Charbax filmed a video with ZX296702-AD1 development board at Linaro Connect HK, initial patchsets were recently submitted to the Linux ARM Kernel mailing list for XZ296702 SoC and the development board. There aren’t any product page for ZX296702 processor, so instead let’s have a look at the board’s specifications: SoC – ZTE ZX296702 dual core ARM Cortex A9 processor with Mali-400 GPU System Memory – 512 MB RAM Storage – 4GB flash + micro SD card Video Output – HDMI + AV (RCA) Audio Output – HDMI + Stereo audio (2x RCA) Connectivity – Ethernet and Wi-Fi USB – 2x USB 2.0 host ports Power Supply – 5V Considering the board is running Android 4.4, the specs are quite low end, however the developers claim to have […]

April 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Zidoo D1 Android DVB-T2 Set-top Box is Powered by ALI M3733 SoC

We’ve already seen Android set-top boxes powered by ALi M3733 dual core Cortex A9 processor with either DVB-T2 or DVB-S2 tuners. Zidoo, the maker of Zidoo X9 Android HDMI player and recorder, have unveiled a new model based on ALi processor dubbed Zidoo D1 that will come with a DVB-T2 tuner, and they’ve also released a video giving a better glimpse of the user interface used in ALi M3733 media players. The hardware specs are very similar to Uyesee L100T2: SoC – ALi M3733 dual core Cortex A9 processor with a dual core Mali-400 GPU System Memory – 512 MB or 1GB DDR3 Storage – 4 or 8 GB NAND flash Video & Audio Output – HDMI 1.4 up to 1080p + 3.5mm AV jack Tuner DVB-T and DVB-T2 with male and female IEC 169-24 connectors for loop and output. Frequency – 104-862MHz (VHF/UHF) Demodulation – QPSK, 16QAM, 64QAM for DVB-T; […]

April 27, 2015August 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 46 Comments

Wintel W8 Review – Dual Boot Android & Windows TV Box

Wintel W8 (aka Kingnovel K8) is an Intel Atom Z3735F mini PC inspired from Sunchip Wintel CX-W8 (the hardware is a little different), but instead of just running Windows 8.1, the device can dual boot Android 4.4 and Windows 8.1 with Bing. I’ve already taken pictures or torn down Wintel W8, so today, I’ll focus on the software part of the review, first checking dual boot functionality and Windows 8.1 briefly since it should be very similar to MeLE PCG03, before spending more time on Android as it’s my first Android Intel platform. Dual boot in Wintel W8 When you boot the device, you can select Android or Windows icon, with a 10 second timeout that will boot your latest choice. There’s no menu within Windows to start Android, and vice versa, so to dual boot you need to reboot first, and select the operating systems right after UEFI. The […]

April 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 43 Comments

Wintel W8 Dual boot Android 4.4 + Windows 8.1 mini PC Unboxing

Last year, we were promised dual boot mini PC based on Intel that would run Windows 8.1 or Android 4.4, but finally companies decided against shipping a dual boot firmware, and simply loaded Windows 8.1 on their machines. Kingnovel sent me their K8 mini PC, better known as Wintel W8, based on Intel Atom Z3735F, and that can dual boot Windows 8.1 with Bing or Android 4.4. Today, I’ll go through the specs first, take some pictures of the device, and tear it down to have a closer look at the hardware, and in a separate post I’ll quickly check out Windows 8.1, before spending a bit more time on Android 4.4 to see how well or bad Android runs on Intel platforms. Kingnovel K8 / Wintel W8 specifications Hardware-wise the box has mostly the same boring specifications as almost any other Intel Atom Z3735F products on the market: SoC […]

April 23, 2015April 23, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

e-con Systems 13MP MIPI CSI-2 Camera Designed for Nvidia Jetson TK1 Board

e-con Systems has just introduced e-CAM130_CUTK1, a 13 MP MIPI CSI-2 camera board specifically designed for Nvidia Jetson TK1 development board powered by Nvidia Tegra K1 quad core Cortex A15 processor supporting up to Ultra HD (3840×2160) resolution @ 22 fps, or 1080p @ 30+ fps with MJPEG or YUV422 output. e-CAM130_CUTK1 camera board is comprised of a camera module and an adapter board that can be directly plug into Jetson TK1 board. Camera board key features and specifications: Camera Module e-CAM130_CUMI1820_MOD with S-mount lens holder based on Aptina AR1820HS sensor. Max S/N ratio: – 36.3 dB; Dynamic Range: – 65.8 dB Interface – 4-lane MIPI CSI-2 interface Resolution / Frame rate – VGA @ 90 fps, 720p @ 60 fps, 1080p @ 30 fps, UltraHD (3840×2160) @ 22 fps, 13MP (4224×3156) @ 14 fps. Values are the same for MJPEG or YUV422. Connector – 125-pin connector for Jetson TK1 […]