Video Category - Page 219 of 330 - CNX Software

February 10, 2016February 11, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

SkyStream X5 Android Streaming Media Player Also Includes an ATSC Tuner

While there’s now a decent choice of Android TV boxes with DVB-S2 or DVB-T2 tuners, devices with ATSC tuners are a little harder to come by, and the few Android devices I know of include WeTek Play, U4 Quad, and some Mygica (Geniatech) and Vygica ATSC Android set-top boxes. SkyStream X5 is now another option, based on Amlogic S812, mostly advertised as an Android streaming player, but still with one ATSC tuner to watch free-to-air television in North America, and a few smaller countries. SkyStream X5 specifications: SoC – Amlogic S812 quad core Cortex A9 processor @ 2.0 GHz with Mail-450 octa-core GPU System Memory – 2GB DDR3 Storage – 16GB flash + SD card slot Video & Audio Output – HDMI 1.4 with HDCP support + 3 RCA ports for composite and stereo audio Video Codecs – MPEG, MPE, MPG, M2V, ISO, TS, VOB, DAT, AVI, MKV, MP4, MOV, […]

February 9, 2016February 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Ugoos AM1 4K TV Box Review

Ugoos AM1 is yet another TV box based on Amlogic S905. I’ve already published specifications and uploaded some pictures of the nice looking cyan box and its board, so today I’ll report on my experience after actually playing with the device, where I mostly focused on known problems found on other S905 mini PCs, and some extra features added to Ugoos firmware. First Boot, Settings, and First Impressions I filled all three USB ports with a USB webcam, a USB hard drive, and a USB hub with RF dongles for MINIX NEO A2 Lite air mouse, Tronsmart Mars G01 wireless gamepad, and a USB keyboard (convenient for screenshots), and connected Ethernet, HDMI and power cables. A boot will usually take around 30 seconds. Before going through the user interface, I’ll mention that OTA firmware upgrade worked very well, and it was one of the first thing I did before the […]

February 8, 2016February 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

You Can Now Connect ESP8266 Module to Your Color Television (Sort of)

You can do lots of things with ESP8266 WiFi modules, but CNLohr did something rather unexpected as he managed to use GPIO3/RX pin to broadcast NTSC signals first in black & white, and now in color, to his television’s channel 3. On the hardware side, he did have to disconnect the WiFi antenna, and connected a wire antenna to GPIO3/RX pin. He then set I2S to run at 80 Mbps, and pushed data out using DMA buffers, so he could achieved the 61.25 MHz frequency required for NTSC luminance data, and the color data, 3.579MHz higher up. Once the demo is running, you can alter it on the fly using a web neat interface. This is all explained on channel3’s github repository, as well as one a 15-minute video showing the capabilities and limitations, and explaining how you can play around with the parameters. Via ESP8266COM’s Tweet. Jean-Luc Aufranc (CNXSoft)Jean-Luc […]

February 7, 2016February 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Izitron I-SEN1 Environmental Sensors Board Works with XBee Modules

Izitron, a start-up based in the South of France, has designed a board with temperature, pressure, humidity and light sensors and a XBee header to provide a way to monitoring environmental variables for weather monitoring, agriculture, industrial applications, and more. I-SEN1 technical specifications: Sensors Temperature – Microchip MCP9700-E/T0; accuracy: ±4°C Accuracy from 0°C to +70°C | -4°C/+6°C Accuracy from -40°C to +150°C; temperature range: -40 to 125 °C Pressure – Infineon KP236N6165; accuracy: 2%; pressure range: 60 kPa to 165 kPa; temperature range: -40 to 125 °C Humidity – Honeywell HIH-5030-001; accuracy: ±3% RH; range: 0 to 100% RH; temperature range: -40 to 85 °C Light – AMS TSL14S-LF; reponsivity: 16 mV/ (uW/cm2); temperature range: 0 to 70 °C Header for XBee RF module Power Supply 5V via micro USB 5 to 12V via Wago terminal block 2x batteries No power management chip Power on/off button Power consumption – Up […]

February 5, 2016February 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

ProView S3 Affordable 3-Axis Smartphone Stabilizer Helps Shooting Better Videos (Crowdfunding)

Smartphone stabilizers (aka gimbals) for smartphones allow you take much better videos while on the move, as they smooth the shaking that occurs when you walk, run, or bike. Stabilizers are currently available, such as KumbaCam or other white brand stabilizers, are sold for $250 to $400, but Navin, a Taiwanese company, has designed a cheap video stabilizer for smartphones with ProView S3 that starts at $125 + shipping via Indiegogo. ProView S3 3-axis stabilizer can handle larger size smartphones, features orientation sensors, precision motors, and stabilization algorithms to provide smooth video recording. Some of ProView S3 specifications and features include: Adjustable mount from 67mm to 78 mm width Wind resistant thanks to algorithms and mechanical design Connectivity – Bluetooth 4.0 for wireless firmware updates Dual IMU sensors with tilt, roll, and pan motors. Underslung shot- You can take videos upside down too… 4 operational modes – Full Lock (no […]

February 5, 2016February 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

How to Use Your Old Laptop Screen with Raspberry Pi or Your Computer

After reading an article on Liliputing about using Raspberry Pi Zero with Motorola Lapdock, I decided to look for clones for the device since Motorola Lapdock is now hard to buy at a decent price, if at all, since the product has been discontinued for a while. I did not find anything similar, but instead I came across M.NT68676.2A LCD driver HDMI kit selling for $37.99 on eBay that allows you to re-use your old laptop screen with any development board or computer that comes with HDMI, DVI, or VGA output. The kit is comprised of a monitor control board (M.NT68676.2A), an “inverter” board which depends on your LCD panel model number, a keypad board, an LVDS cable, and a cable to connect all three boards together. M.NT68676.2A monitor control board specifications: Chipset – NT68676 (UFG) Supported Panel – LED/LCD, Single/Dual LVDS (8bit) up to 2048×1152 resolution Video Input “PC-RGB […]

February 3, 2016September 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

EyeTV NetStream Streams Free-to-Air Digital TV to Any Devices at Home

A few months ago, I wrote about TBS AMD Moi Pro streaming server supporting up to 16 tuners and mostly targeting businesses, but I’ve also found out there are some consumers solutions such as Elgato EyeTV NetStream 4Sat that includes four antenna inputs for your satellite dish (DVB-S2/S), and the ability to stream live TV to any devices, using hardware video transcoding if need be, for example to Android or iOS smartphones. Versions with DVB-T2 and ATSC will soon be available. EyeTV NetStream 4Sat specifications: Tuners 4x satellite inputs: F connector for RG-6/U coaxial satellite cable DVB-S2 / DVB-S Digital Universal LNB: Single, Twin/Dual, Quad or Quattro Unicable Integrated multiswitch DiSEqC 1.0 Connectivity – Gigabit Ethernet USB – 2x USB 2.0 host ports Misc – Reset button, power switch Power Supply – DC 12V 3A Dimensions – 25 x 12.6 x 4.1 cm (suitable for wall-mounting) Weight – 806 grams […]

February 2, 2016February 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Unboxing of MINIX NGC-1 Windows 10 Edition mini PC

This morning I’ve received MINIX NGC-1 Intel Braswell fanless mini PC, so I’ve taken a few pictures of the device and its accessories, before starting testing the performance and reliability of this low power computer. Contrary to the black, gray and green packages I’ve come across for their Android TV box, MINIX has gone blue with their latest Intel mini PC’s package. The product announcements mentioned both Windows 10 and Ubuntu support, and I’ve received the Windows 10 Edition, which hopefully means there will also be a Ubuntu edition. Beside the mini PC, the package includes two external WiFi antenna, an HDMI cable, a 12V/3A power supply and corresponding power cord, as well as a multi-language setup guide, and MINIX product brochure. The power supply should work anywhere in the world as it takes 100-240V/1A input @ 50 or 60 Hz. NGC-1 is very similar to the one used for […]