Video Category - Page 215 of 330 - CNX Software

March 25, 2016July 30, 2016 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Stream Live TV to Your Computer or Smartphone with U4 Quad Hybrid Android TV Box, Kodi and TVheadend

TVheadend is a streaming server and recorder for Linux, FreeBSD and Android supporting DVB-S, DVB-S2, DVB-C, DVB-T, ATSC, ISDB-T, IPTV, SAT>IP and HDHomeRun as input sources, and while in theory it should be possible to configure any recent Android TV set-top box with digital TV tuners, configuration is complex, and there’s no guarantee the tuner will be recognized. However, the manufacturer of U4 Quad Hybrid has already configured their box to support HTSP clients, so I’ve installed the latest firmware, and given it a try with my Android smartphone running Kodi 15.2 with TVheadend HTSP client, and I could successfully stream live TV (DVB-T2 free-to-air channels) to my smartphone. Once you’ve scanned the channels using DVB-T2 and/or DVB-S2, there’s no other configuration in U4 Quad Hybrid TV box, but you’ll still need to find out your IP address by going to Setup->Network, and WiFi, Ethernet or 3G depending on your […]

March 24, 2016March 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

ViXS Xcode 6800 Series Processors Support 4K 12-bit HEVC with HDR, VIDITY DRM

Now that 4K televisions are becoming more and more common, and 4K content is starting to be available via satellite (DVB-S2), online (Netflix, Amazon..), and off-line via UHD blu-ray discs, a new consumer initiative has been launched by the UHD Alliance. The UltraHD Premium logo will allow consumers to make sure their new 4K television also supports specific performance metrics for resolution, high dynamic range (HDR), peak luminance, black levels and wide color gamut. many of these new features will allow requires new content, and set-top box beside the compliant television. ViXS Xcode 6800 dual core Cortex-A9 dual-core processor will meet the requirement with a 4K 12bit HEVC (Main12) 60 fps video decoder, HDR Tone Mapping engine, HDMI 2.0a, and more. Some of the key features of ViXS Xcode 6800 processor: CPU – Dual core ARM Cortex A9 processor GPU – 3D graphics engine compliant with OpenGL-ES 2.0 and OpenGL-ES […]

March 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

WeKast is a HDMI & VGA Wireless Display Dongle for Business Presentations (Crowdfunding)

You have already many options to mirror your mobile device’s screen to a big TV or projector with Chromecast, Miracast adapters, or EZCast dongles. However, if you want to connect it to a projector with a VGA connect you’ll need a separate HDMI to VGA adapter, and some devices may require Internet access, which you may or may not have during your presentations. WeKast dongle have been designed to simplify the process of setting up your presentation on any premises with HDMI and VGA output, and no requirement for WiFi connectivity. Simply copy your presentation on your smartphone, connect the dongle, and you’re ready to get started using WeKast app on your Android or iOS smartphone. WeKast hardware specifications: CPU – 1.6GHz processor System Memory – 1GB RAM Connectivity – 802.11 b/f/n with WPA2 enterprise security Video Output – Female HDMI and female VGA ports USB – 1x micro USB […]

March 18, 2016March 18, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Doogee P1 is a Tiny Android 4.4 DLP Projector That Supports Screen Mirroring and Extension over WiFi

Doogee Smart Cube P1 looks like a colorful Android 4.4 TV box powered by an Amlogic quad core processor, but it’s actually an Android DLP projector without other video output ports (no HDMI, no composite) that can also be used to mirror or extent your laptop or smartphone screen. Doogee P1 specifications: SoC – Amlogic quad core processor (likely Amlogic S805 quad core Cortex A5 since the device is running Android 4.4) System memory – 1GB DDR3 Storage – 8GB eMMC flash Projector Texas Instrument DLP with 70 lumen/3W brightness, OSRAM LED, and 30,000 hours LED lifetime Resolution – 854×480; max: 1280×720 Contrast ratio – 800:1 Manual focus Audio – 2x 1.2W speakers Connectivity – 802.11 b/g/n and Bluetooth USB – 1x USB 2.0 host port, 1x micro USB OTG port Misc – Dual LED charging LED, power and reset buttons Power Supply – 5V via USB OTG port Battery […]

March 18, 2016March 18, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

e-Con Systems Propus Nvidia Tegra K1 Development Board Features 3 MIPI-CSI Camera Interfaces

I mostly know e-Con Systems because of their camera modules, but the Indian company has also been manufacturing system-on-modules and development kits, and has just launched Propus development board based on their eSOMTK1 computer-on-module powered by Nvidia Tegra K1 quad core Cortex A15 processor, and including three camera interfaces with two 4-lane and one 1-line MIPI-CSI2 connectors. Propus specifications: Computer-on-module – eSOMTK1-F16G-R2G-WB-IM: SoC – Nvidia Tegra K1 4-plus-1 ARM Cortex-A15 processor @ up to 2.3 GHz with 192-core Kepler GPU. System Memory – 2GB 64-bit DDR3L SDRAM Storage – 16GB eMMC flash Connectivity – 802.11 a/b/g/n and Bluetooth 4.1 module with 2 u.Fl antenna connectors Sensors – 3D digital accelerometer and a 3D digital gyroscope (6 axis) Power Management IC (5V and 12V inputs) SoM connectors – 4x 100-pin board to board connectors Storage – SATA connect, micro SD slot Video Output – 1x HDMI 1.4 Audio – Audio Codec […]

March 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Play High-end PC Games on ARM Linux Boards with Moonlight Embedded

Nvidia first showcased PC games streaming to Nvidia Project SHIELD Game Console at CES 2013, and since then Moonlight project has been created to provide an open source implementation compatible with Nvidia Gamestream, and supported on Linux, Mac OS and Windows PC, Android & iOS mobile devices, as well as Samsung VR kits. There’s also an implementation called Moonlight Embedded designed for ARM Linux platforms such as Raspberry Pi,ODROID, Cubox-i boards, and ODROID-C1 and ODROID-C2 boards even got support for H.265 streaming very recently allowing for better quality over H.265 at a given bit rate, and possibly 4K @ 60 Hz gaming on ODROID-C2 board. You’ll need a Windows gaming PC with an Nvidia GTX 600/700/900 series GPU, a wired connecting or a high-end 802.11 router or greater, and Nvidia Geforce Experience (GFE) installed on your PC. H.265 requires an Nvidia 900 series GPU such as Nvidia GTX960. Once this […]

March 16, 2016March 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Accelerated 3D Graphics, Hardware Video Decoding, and Network Performance on Orange Pi One Board (Video)

I’ve just written Getting Started Guide for Orange Pi One, a $10 development board based on Allwinner H3 quad core Cortex A7 processor, where I explain how to install and configure Armbian distribution on the board. As promised, I’ve also tested 3D graphics acceleration, and hardware video decoding, and also included some Ethernet benchmarks. Since ARM Mali-400 GPU found in Allwinner H3 is only capable of OpenGL ES, as in most ARM SoCs, you can test 3D graphics acceleration by using es2gears (and not glxgears as I’ve seen some other do in the past):

es2gears
EGL_VERSION = 1.4 Linux-r3p0-04rel0
vertex shader info:
fragment shader info:
info:
1463 frames in 5.0 seconds = 292.425 FPS

es2gears

EGL_VERSION = 1.4 Linux-r3p0-04rel0

vertex shader info:

fragment shader info:

info:

1463 frames in 5.0 seconds = 292.425 FPS

The log shows the utility is using Linux-r3p0 Mali driver, and the gears are display at a high frame rate close to 300 fps. If I switch to full screen, the frame rate drops to about 43 fps, which should still be acceptable. CedarX is the infamous closed source and GPL violating media library released […]

March 15, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Cleo35 Touchscreen Display for Arduino UNO Comes with Tutorials and Example Projects (Crowdfunding)

There are already various options to add a (touscheen) display to Arduino board with software support including TFTLibrary for Arduino, and recently I tried Nextion serial touchscreen displays that are supported by a WYSIWYG editor, but the latter is only supported in Windows and not exactly user-friendly, and I found the few provided tutorials would only work with a specific resolution incompatible with the displays I had been sent. So I gave up on the idea of interfacing the display with Arduino or ESP8266 as it would be too time-consuming. FTDI CleO project might be faster and easier to get started, as their CleO35 touchscreen display for Arduino UNO will come with a 20 chapter tutorial covering over 80 topics, and 20 projects to get started. Some of the key features and specs of Cleo35 display include: MCU – FTDI FT903 32-bit FT32 core @ 100MHz with 256kB on-chip Flash […]