Video Category - Page 170 of 324 - CNX Software

September 7, 2017June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

e-con Systems Introduces a 360° Camera Kit for NVIDIA Jetson TX1/TX2 Development Boards

e-con Systems has previously launched MIPI cameras for Jetson TX1/TX2 development kit, but the company has now announced e-CAM30_HEXCUTX2, a kit with an adapter board, and six synchronized HD cameras connected that can be used for video surveillance, or robots requiring a 360° or “720°” field of view. The kit is comprised of the following elements: e-CAMHEX_TX2ADAP adapter board for connecting six cameras through Jetson boards’s J22 connector supporting up to 6x 2-lane MIPI CSI-2 cameras 6x 3.4MP MIPI CSI2 low light camera board with interchangeable S-mount lens, and featuring ON Semiconductor AR0330 color CMOS image sensor; each camera supports VGA to 1080p/3M resolution up to 30 fps 6x 30cm custom micro coaxial cable The kit operates at 5V, and requites between 5.33 to 8.10 watts, the later while streaming 6 Cameras on Jetson TX2. Software support is implemented through a Linux camera driver (V4L2) on top of NVIDIA’s JetPack […]

September 6, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Flick HAT is a 3D Tracking & Gesture Expansion Board for Raspberry Pi Boards

Way back in 2012, I wrote about Microchip MGC3130 3D Gesture Controller with “GestIC technology” which allows you to make gesture up to 15cm from the surface and at lower power in order to control devices in a new way. At the time, the chip was said to sell for $2.26 in large quantities, and the evaluation kits went for $169 and up. I’m writing about MGC3130 about 5 years later, as Seeed Studio has started taking pre-orders for a $25.89 Flick HAT board based on the solution, and designed for Raspberry Pi boards, or other boards with a compatible 40-pin “GPIO” header featuring an I2C interface. Flick HAT 3D Tracking & Gesture HAT specifications & features: Chip – Microchip MGC3130 3D Tracking and Gesture Controller Tracking / Gesture Features 3D tracking Gesture sensing up to 15cm: Swipe (east to west, west to east, north to south, south to north), […]

September 5, 2017September 5, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

MINIX NEO N42C-4 Apollo Lake Mini PC To Launch Soon with SO-DIMM and M.2 Slots

I’ve just completed MINIX NEO Z83-4 Pro review, a Cherry Trail mini PC with Windows 10 Pro, but if you’d like something with a more recent and faster processor, the company will soon launch a MINIX NEO N42C-4 with an Apollo Lake processor, and upgradeable memory and storage. MINIX NEO N42C-4 preliminary specifications: SoC – Intel Pentium N4200 quad core “Apollo Lake” processor @ 1.10 / 2.50 GHz with 18 EU Intel HD Graphics 505 (6W TDP) System Memory – 4GB DDR3L SO-DIMM module (upgradeable to 8GB via 2x SO-DIMM slots) Storage – 32GB eMMC 5.1 flash, 1x 2280 M.2 SSD slot Video Output – HDMI 1.4 up to 4K @ 30 Hz, mini DisplayPort up to 4K @ 60 Hz, USB type C up to 4K @ 60 Hz(video only, no audio); supports for up to 3 independent displays Audio – Via HDMI, miniDP, 3.5mm audio combo jack Connectivity […]

September 5, 2017September 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

MINIX NEO Z83-4 Pro Mini PC Review – Part 2: Windows 10 Pro

MINIX launched NEO Z83-4 Cherry Trail mini PC last year, but the company has now launched NEO Z83-4 Pro, an updated version with a slightly faster Atom X5-Z8350 processor, Windows 10 Pro (instead of Home), and a a VESA mount kit. I’ve already checked the hardware in the first part of the review, so today I’ll report my experience with Windows 10 Pro. Windows 10 Home vs Windows 10 Pro My main computer runs Ubuntu 16.04, and I’m only using Windows 10 during reviews… But so far all other mini PCs I tried came with Windows 10 Home, and NEO Z83-4 Pro is my first Windows 10 Pro computer. So I had to educate myself, and Microsoft website has a comparison between the two versions of Windows 10. Windows 10 Pro supports all features of Windows 10 Home, plus the following: Security Windows Information Protection – Formerly Enterprise Data Protection […]

September 5, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Connect Watch Runs AsteroidOS Open Source Operating System (Crowdfunding)

At the beginning of last year, we discovered AsteroidOS (hobby) project aiming to provide a Linux based open source operating system working on some Android Wear smartwatches. At the time the OS relied on Android drivers working with libhybris, Qt5/QML for apps, and only supported LG G Watch. Since then, Florent Revest has continued development, with more watches being supported from Samsung, Asus, and other brands, and a French startup has decided to design and bring to market Connect Watch running AsteroidOS. Connect Watch specifications: SoC- Mediatek quad core processeur @ up to 1.39GHz MTK System Memory – 512MB or 1GB RAM Storage – 4 or 8GB flash Display – 1.39″ round Amoled display with 400×400 resolution Audio – Built-in speaker Connectivity Bluetooth Optional GSM ( 850/900/1800/1900MHz) and 3G WCDMA (850/2100MHz) support with nano SIM card slot GPS Camera – 2.0 MP; records to 720p Sensors – Heart rate monitor […]

September 4, 2017September 5, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Orange Pi 2G IoT Board Can Now Boot Linux from NAND Flash

Orange Pi 2G IoT is a $10 development board with a 2G cellular modem that was launched last March. The board is based on RDA Micro RDA8810PL processor designed for cheap Android phones, but Linux support was also promoted, and an RDA8810 Android SDK was released in April. It was the first time RDA8810 was used in a development board, and unsurprisingly it was, and still is, a challenge to use such board, as software support is on-going… So people who purchased the board has troubles with controlling GPIOs, or booting Linux from the SoC’s built-in NAND flash, instead reverting to booting from a micro SD card. Luckily, Orange Pi forum’s user surfero75 worked on the latter, found a solution, and posted instructions in Spanish. He wrote those instructions leveraging the work done by Aib user, and I summarized the main steps below explaining how install and boot from NAND […]

September 3, 2017September 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Huawei Introduces Kirin 970 Mobile SoC with Built-in Neural Processing Unit for Artificial Intelligence Applications

Huawei has unveiled their latest Kirin 970 SoC for premium smartphone at IFA 2017. The processor features an 8-core CPU, and a new 12-core GPU, but what makes this new processor stands apart it a dedicated Neural Processing Unit (NPU) to accelerate tasks used for artificial intelligence, with the company claiming the NPU delivers 25 times the performance with 50x greater efficiency compared to a quad core Cortex A73 processor for AI computing tasks. In practical terms, Kirin 970 could process 2,000 images per minute in an unnamed benchmark image recognition test. The press release also mentions the processor will pack 5.5 billion transistors packed into 1 cm² and be manufactured using a 10nm “advanced processor”. But they did not go into much further details about the specs, so instead, I used info from Anandtech and the slide above to derive Kirin 970 technical specifications: CPU – 4x ARM Cortex […]

September 1, 2017November 17, 2020 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

AutoPi is a 4G & GPS OBD-II Dongle Based on Raspberry Pi Zero W Board (Crowdfunding)

We’ve previously covered Macchina M2 OBD-II dongle based on an Arduino compatible MCU, and with 4G LTE support for the maker market, and iWave Systems OBD-II dongle with 4G LTE and LTE running Linux on NXP i.MX6 for the B2B market, but so far I had not seen an hackable OBD-II dongle running Linux for the maker market. AutoPi dongle fills that void as it is based on Raspberry Pi Zero W board, runs Raspbian with Autopi software (AutoPi Core), supports 4G LTE, GPS, etc,.. and connects to your car’s OBD-II socket. AutoPi dongle specifications: SoC – Broadcom BCM2835 ARN11 Core processor @ up to 1 GHz System Memory – 512MB LPDDR2 SRAM Storage – 8GB micro SD card Cellular Connectivity 4G Cat 1 modem with 3G/EDGE fallback working worldwide (but region locked) 4G bands – Region specific 3G fallback (WCDMA) – B1, B2, B4, B5, B8 EDGE fallback – […]