Video Category - Page 151 of 326 - CNX Software

May 22, 2018May 22, 2018 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Circumference Datacentre-in-a-Box Features up to 32 Raspberry Pi 3 B+ Managed by a UDOO x86 Ultra Board (Crowdfunding)

We’ve previously seen several clusters made of Raspberry Pi boards with a 16 RPi Zero cluster prototype, or BitScope Blade with 40 Raspberry Pi boards. The latter now even offers solutions for up to 1,000 nodes in a 42U rack. Circumference offers an other option with either 8 or 32 Raspberry Pi 3 (B+) boards managed by UDOO x86 board acting as a dedicated front-end processor (FEP) that’s designed as a “Datacenter-in-a-Box”. Key features and specifications: Compute nodes – 8x or 32x Raspberry Pi 3 B+ boards for a total of 128x 64-bit 1.4 GHz cores max Backplane MCU – Microchip ATmega1280 8-bit AVR microcontroller Serial Comms – FTDI FT4232 quad-USB UART Switched Mode Power Supply Units (SMPSUs): 8x / 32x software controlled (one per compute node) 1x / 4x always-on (microcontroller) HW monitoring: 8x / 32x compute node energy 2x / 8x supply voltage 2x / 8x temperature Remote […]

May 21, 2018May 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

ESP32-Sense Kit Lets You Experiment with ESP32 Touch Interface

Beside support for Bluetooth, one the other extra benefits of Espressif ESP32 over ESP8266 is the presence of a touch interface in the newer processor. If you are interested in that specific features, Espressif Systems has worked on ESP32-Sense kit that provides a main board with ESP32, and several touch enabled daughter boards. Board descriptions in the kit: Motherboard with ESP32 module (ESP-WROOM-32), a 3-digit display unit, a debug unit, USB port for power, switches, an RGB LED, and expansion headers. 5 daughterboard: linear slider duplex slider wheel slider matrix buttons spring buttons. Developers could even design and add their own daughterboards to connect to the motherboard’s touch header. A good way to get started with your own board is to check out ESP32 Sense Kit reference design files with Cadence/OrCAD Capture V16.6 schematics, and Mentor Graphics/Pads VⅩ.2 PCB layout files. But if you are just interested in the software […]

May 20, 2018May 20, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

ZiP (zGlue Integration Platform) Enables the Design & Manufacturing of Low Cost Custom Chips

When I first started to read about zOrigin on Crowdsupply, I was not really impressed. Meh… Yet another Bluetooth LE fitness tracker with a few sensors, and an Android app. But as I read further, I found out the interesting part was inside the device: ZGLZ1BA, a custom chip manufactured using ZiP (zGlue Integration Platform) chip-stacking technology, which produces something similar to SiP (System-in-Package) but at a much lower cost and manufacturing lead time. But let’s have a look at zOrigin tracker first, which acts as a demonstration / evaluation platform for ZiP technology. Key specifications & features: “SoC” – ZGZL1BA ZiP with Dialog Semiconductor DA14585 16MHz 32-bit ARM Cortex M0 MCU with BLE Analog Devices AD8233 Heart Rate Analog Front End (AFE) Macronix MX25R4035F 2 Mbit Flash Memory MCube MC3672 Accelerometer Maxim MAX77734 Power Managment IC (PMIC) SiTime SIT1552 32 kHz Oscillator Vishay SI8466EDB MOSFET 30 passive components Package […]

May 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

UMIDIGI Z2 Pro is one of the first Smartphones based on MediaTek Helio P60 SoC

MediaTek unveiled Helio P60 Cortex A73/A53 processor with AI HW acceleration a few months ago, and we were promised smartphones would start selling in Q2 2018. Mediatek’s partners seem to be right on schedule, as several MediaTek Helio P60 smartphones have now been announced, including UMIDIGI Z2 Pro, which we’ll cover in this post. Specifications for UMIDIGI Z2 Pro smartphone: SoC – MediaTek Helio P60 big.LITTLE octa-core processor with four Arm Cortex-A73 up to 2.0 GHz, four Arm Cortex-A53 up to 2.0 GHz, Arm Mali-G72 MP3 GPU at 800MHz, and a multi-core AI processing unit System Memory – 6GB RAM Storage – 128GB flash, micro SD slot up to 256 GB Display – 6.2″ FHD+ (1080 x 2246) display with 403 PPI Camera 16MP + 8MP rear camera, 5-element lens, Samsung sensor, dual LED flash, face recognition 16MP + 8MP front-facing camera, ƒ/2.0 aperture, Sony sensor, face recognition Video recordings […]

May 17, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

HP t430 Thin client Works with a Single USB Cable

Gemini Lake mini PCs are starting to sell and ship, and from the look of it, HP t430 appears to be yet another Gemini Lake mini PC based on an Intel Celeron N4000 processor. But the device is actually a thin client that has been designed to work with a single USB type C cable for power, video and audio. HP t430 specifications: SoC – Intel Celeron N4000 dual core processor @ 1.1 GHz / 2.4 GHz with Intel UHD Graphics 600 System Memory – Up to 4GB DDR4 RAM Storage – 16 GB to 32 GB Flash memory Display – HDMI, DisplayPort 1.2, USB type C DisplayPort Alt-mode Audio – Headphone/microphone mini-jack Networking – Gigabit Ethernet, and WLAN USB – 3x USB type A ports, 1x USB type C (DisplayPort 1.2, USB 3.1, charging) Misc – Power button, Kensington lock Power Supply – 19V DC, 45 W, worldwide auto-sensing, 100-240 […]

May 17, 2018May 17, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

XU4Q Retro Gaming System Runs ODROID GameStation Turbo, Sells for $150 and Up

One of the use case for little Arm Linux boards is retro gaming thanks to open source projects like RetroPie, RetrOrangePi, Lakka, and others. To get a complete & usable system, it’s possible to purchase console kits, enclosures, or even complete game consoles running one of such emulators. This morning I’ve come accross another option, as Ameridroid is now taking pre-order for XU4Q Retro Gaming System for $149.95 and up. As it name implies, the console is based on ODROID-XU4Q, the fanless version of ODROID-XU4 board, which with its Exynos 5422 octa-core processor and 2GB RAM will be much more powerful than Raspberry Pi 3 boards, and most other boards on the market. The kit also includes OGST Gaming Console, GameSir G3w analog joystick controller, a power supply, and a 16GB microSD boot media flashed with ODROID Game Station Turbo based on Debian. If you already own an ODROID-XU4(Q) board, […]

May 16, 2018May 16, 2018 by Ian W MORRISON (Linuxium) - 24 Comments

Intel NUC Kit NUC7PJYH Review – An Intel Gemini Lake Pentium Silver J5005 Barebone Mini PC

When Intel released their latest NUC Gemini Lake mini PCs they prioritized cost over performance. As a result the processor they chose for the ‘Intel NUC 7 Essential’ mini PC is somewhat underwhelming. Fortunately they released another model in the series, the rather misleadingly named ‘Intel NUC Kit NUC7PJYH’ which is is actually a ‘barebones’ mini PC just needing a stick or two of RAM and an SSD for storage. It contains an Intel Pentium Silver Processor J5005 SOC which is a quad core processor bursting up to 2.80 GHz together with a slightly more powerful Intel UHD Graphics 605 processor that is capable of 4K support at 60Hz. Visually it is no different to the Celeron NUC reviewed earlier in that it is physically small consisting of an approximately 4.5″ square case about 2″ tall with a distinctive front panel that includes the power button and a couple of […]

May 16, 2018May 16, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

AsteroidOS 1.0 Released – An Open Source Linux OS for Wear OS Smartwatches

We first discovered AsteroidOS, a Linux based open source operating system working on some Android Wear (now Wear OS by Google) smartwatches, in early 2016 while looking at FOSDEM 2016 schedule. The project and community have since grown to support more watches, and a company even tried to launch an AsteroidOS smartwatch (sadly unsuccessfully), but development kept going, and now the very first stable release is out with AsteroidOS 1.0. Some of the highlights of the release: AsteroidOS 1.0 features and apps: phone notifications, an agenda, an alarm clock, a calculator, a music remote control, settings customizations, a stopwatch, a timer, and a weather forecast app. Bluetooth Low Energy (BLE) sync with Android phones using AsteroidOSSync app. Supported hardware LG G Watch, LG G Watch Urbane, LG G Watch R Asus Zenwatch 1, Asus Zenwatch 2, Asus Zenwatch 3 Sony Smartwatch 3 Software emulator for testing and development. Community supported […]