Video Category - Page 150 of 327 - CNX Software

June 13, 2018 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

$9 SQ8 may be the World’s Smallest Car Dash Camera / Action Camera

There are so many car dash DVRs and action cameras on the market that barely differentiate themselves on the market that I don’t usually write about those anymore. But SQ8 “mini car video recorder full HD sports DV camera” caught my eye First, because at $8.99 on GeekBuying it’s really cheap, but most importantly because it’s incredibly tiny, even smaller than JeVois computer vision camera I reviewed last year. SQ8 camera specifications: Chipset – “AnGuo” Storage – micro SD card up to 32 GB Camera 12MP CMOS image sensor for 1080p30 videos (AVI/MJPG) 65 Degrees Wide Angle 3mm lens Motion Detection, Night Vision Audio – Built-in microphone/speacker (AAC) USB – 1x mini USB port Misc – On/off and mode buttons, reset pinhole, LED indicator Battery – 200 mAh good for about 100 minutes Dimensions – 2.2 x 2.2 x 2.0 cm Weight – 25 grams Operating Temperature – 0 – 60 […]

June 13, 2018June 15, 2018 by Karl Johnson - 6 Comments

LiveStream #1 – Migrating to Marlin Firmware

Karl here. I’ve decided to start doing a weekly Livestream on different topics related to subjects covered on CNX Software. For the fist livestream, I will be showing the workflow that I use to migrate to newer Marlin firmware on HE3D K280 3D printer but it applies to any printer. I will also cover the calibration process for the K280. I originally did a written review of the K280 but it is sometimes hard to show concepts in writing. The livestream will take place on June 14th @ 21:30 ET timezone, and if you are interested you can register below, or come back to this page to check it out. Karl JohnsonKarl is a technology enthusiast that contributes reviews of TV boxes, 3D printers, and other gadgets for makers.

June 7, 2018June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Unihertz Atom is an Android 8.1 Phone with a Tiny 2.4″ Display (Crowdfunding)

What we used to call phablet – smartphones with 5″ to 6″ display – are now simply called smartphones, as most companies now offer smartphones with larger displays since they are better suited for tasks like web browsing. Unihertz has gone the other way by launching Atom, an Android 8.1 smartphone with a tiny 2.4″ display. Demand does exist for such Phone, as while the Kickstarter campaign started a couple of days ago, the company has already raised close to $700,000 from around 3,000 backers. The “Atom” name clearly infringes on Intel’s trademark, so the model name is likely to change in a few days as has happened for “Atomwear” and “Nerdonic Atom X1“, but this did not affect the campaigns after they changed the names. Unihertz Atom smartphone specifications: SoC- Unnamed octa-core processor clocked at up to 2.0 GHz System Memory – 4GB RAM Storage – 64GB internal storage […]

June 4, 2018June 4, 2018 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

UM25C is a Better USB Power Meter with built-in Display, Bluetooth, and Android & Windows Apps

Products such as USB Charger Doctor are good way to test your USB chargers or cables, as well as checking the power consumption of USB powered development boards. You just plug them into a USB port, and connect the load, and you’ll see the real-time voltage and current shown on an LED display. Those do the job, but I’ve just been made aware of UM25C USB meter tester that improves a lot on the concept with a dot matrix display capable of showing charts, and Bluetooth connectivity to send the data to Android or Windows devices. UM25C specifications: Display 1.44″ color LCD display 0-5 brightness setting Auto screen off time – 0 to 9 minutes Refresh rate – 2Hz Measurement Range & Accuracy Voltage – 4-24.000V ±0.5‰ + 2digits Current – 0-5.0000A ±1‰ + 4 digits Capacity – 0-99999mAh Energy accumulation – 0-99999mWh Load impedance – 0.8Ω-9999.9Ω Time range – […]

June 1, 2018June 4, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

UDOO BOLT AMD Ryzen Embedded V1000 SBC Goes for $229 and Up (Crowdfunding)

While Intel has been outing low cost and low power processors with less than 10W TDP over the years with their Bay Trail, Cherry Trail, Braswell, Apollo Lake, and now Gemini Lake processors, AMD has not really ventured into the low power space, and the latest announcements about 10-12W processors was for their Embedded G-Series J Family, which I have not seen in many products. More recently, the company introduced Ryzen Embedded V1000 family of processors with 4 to 8 Zen cores, 4K support, 10 GbE interface, and more with a TDP of 12 to 25W for Ryzen Embedded V1202B & V1605B dual / quad core processors. The latest x86 UDOO board – dubbed UDOO BOLT – will be one of the rare AMD development boards available on the market with pricing starting at $229. Two versions of the board will be available: UDOO BOLT v3 with Ryzen Embedded V1202B, […]

May 31, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Intel Launches Optane DC Persistent Memory Compatible with DDR4 DIMMs

Intel and Micron jointly announced 3D Xpoint technology in 2015 that promised to be 1,000 times faster and endurant than NAND flash, and 10 times denser than conventional DRAM. Products were launched in 2017 under the Optane brand with somewhat lower specifications starting with enterprise PCIe SSDs, followed by Optane M.2 cards, and Optane PCIe SSDs for the consumer market which do improve performance for very specific tasks. But beside storage devices, Intel also planned to launch Optane memory that fits into RAM slot, and they’ve finally done that with their Optane DC Persistent Memory fitting into DDR4 DIMMs with capacity ranging from 128GB to 512GB. The Optane DC Persistent Memory modules are made for the datacenter, and will be supported by the next generation of Intel’s Xeon server platforms. The module are sampling now with mass production planned for later this year, but only to select customer. Broad availability […]

May 29, 2018May 30, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Run Windows Programs on Android Devices with ExaGear Windows Emulator App

In recent years, there have been efforts to run apps on operating systems they were not designed to run on. For example, Microsoft added Windows Subsystem for Linux to support Linux command line programs in Windows 10, and Google added the ability to run Android apps to Chrome OS, and is working on Linux programs support for Chromebooks. ExaGear has been providing software to run Windows programs in Linux, including on the Raspberry Pi boards, for several years, but they also published Exagear Windows Emulator – a paid Android app – to run Windows programs in any Android device with appropriate hardware specifications. The virtual machine works on Arm Android devices with with 32-bit x86 Windows applications. You just need to connect a keyboard and a mouse. 64-bit x86 applications and and x86 Android devices are not supported. Some of the supported apps and games include Caesar III, Heroes of […]

May 26, 2018May 26, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

UP AI Edge Enables Artificial Intelligence on the Edge with Intel CPU, GPU, VPU and FPGA Solutions (Crowdfunding)

Back in February of this year, AAEON introduced their UP AI Edge family of products with UP AI Core mini PCIe card based on Intel Movidius Myriad 2 VPU (Vision Processing Unit), and UP Core Plus board powered by a choice of Apollo Lake processors, and supporting AI Plus FPGA and AI Net Ethernet expansion boards. The company has now launched a Kickstarter campaign for those boards, and added several new products including Vision Plus with three Movidius Myriad 2 VPUs, AI Core M2 with two Movidius Myriad2 VPU in M.2 2280 form factor, as well as the Up Squared AI vision development kit for OpenVINO toolkit. I won’t go through the products announced in February, but let’s have look at the new boards and cards. Vision Plus Board Vision Plus Specifications: VPU – 3x Intel Movidius Myriad 2 VPUs with 512 MB DDR Connectivity – 1x Gigabit Ethernet USB […]