Video Category - Page 113 of 323 - CNX Software

September 30, 2019 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

MUSTOOL MT99 is a $14 Smartphone-shaped Digital Multimeter

About a year ago we covered MUSTOOL MT8206, an inexpensive 2-in-1 multimeter & oscilloscope, and today we noticed another product from the company on Banggood. MUSTOOL MT99 is yet another cheap digital true RMS multimeter, but what’s different is the form factor. The tool looks like a smartphone and as such is more portable than competing multimeters. MUSTOOL MT99 specifications: Display – 3.5″ EBTN LCD with 3-line for voltage, frequency and analog bar… Mesurements DC voltage – 0.5 to 600V/0.1V ±(0.8%+3); input impedance: 10M Ohm AC Voltage – 1V to 600V/0.1V ±(1.2%+5); input impedance: 10M Ohm Resistance – 1Ω-10MΩ (1.2%+3); overload protection 250V AC/DC Capacitance 0.5 uF to 1000uF/0.1uF (3.5%+8) Up tp 6000uF/1uF (4.5%+10) Overload protection 250V AC/DC Frequency – 10Hz-1000Hz (2%+10); RMS above 1V AC Automatically identify diode and continuity Maximum display value – 9999 Live/neutral wire check Data hold, automatic power off Misc Automatic shutdown Portable hanging hole […]

September 29, 2019September 29, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

TechNexion XORE is a tiny NXP i.MX 8M Mini LGA System-on-Module

There are several ways to design a system-on-module to carrier board interface, and the most common solutions are edge connectors (e.g. SO-DIMM), board-to-board connectors (placed under the module), and castellated holes where the board is soldered directly to the baseboard. Another less common method is to design an LGA (Land Grid Array) module, which also have to be soldered straight unto the carrier board, but enables much more compact system-on-modules, and that’s exacty what TechNexion has done with their XORE family of LGA system-on-module currently powered by the 14-nm NXP i.MX 8M Mini processor. XORE-IMX8M-Mini Module TechNexion XORE module specifications: SoC (one of the other) NXP i.MX8M Mini Solo single Arm Cortex-A53 @ 1.8 GHz + M4 processor, Vivante GC7000Lite 3D GPU NXP i.MX8M Mini Dual 2x Arm Cortex-A53 @ 1.8 GHz + M4 processor, Vivante GC7000Lite 3D GPU NXP i.MX8M Mini Quad 4x Arm Cortex-A53 @ 1.8 GHz + M4 […]

September 28, 2019December 14, 2019 by Ian W MORRISON (Linuxium) - 23 Comments

Beelink J45 Mini PC Review – Windows 10 Works as Expected, but Linux is Unstable

[Update December 14, 2019: We’ve now found out that Ubuntu 18.04 can work fine on Beelink J45, but the Realtek Ethernet driver needs to be manually installed] Beelink has added a new mini PC to their ‘Gemini’ range (X45 and X55) namely the Beelink J45 (aka Beelink Gemini J45). What is rather unusual about the naming of this mini PC is that it uses the slightly older Intel Apollo Lake Pentium J4205 CPU which is a quad-core 4-thread 1.50 GHz processor boosting to 2.60 GHz with Intel’s HD Graphics 505. The J45 is another ‘NUC’ style mini PC and physically consists of a 115 x 102 x 43 mm (4.53 x 4.02 x 1.69 inches) box case with a front panel that includes the power button, a headphone jack and a couple of USB 3.0 ports and then on the rear, two more USB 3.0 ports, two HDMI (1.4)ports up […]

September 27, 2019February 16, 2020 by Stephen Vicinanza - No Comments

Blip Nordic nRF52840 Dev Board Includes STM32 Black Magic Probe Programmer & Debugger (Crowdfunding)

The Latest Electronut Labs Nordic nRF52840 Based Dev Board Electronut Labs has started its Crowd Supply campaign for Blip, a Nordic nRF52840 based development board. With many onboard sensors and systems, the boards are aimed at prototyping and projects in a wide variety of BLE and 802.15.4, wireless application scenarios. It has a programmer and debugger built-in. Past Articles Electronut Labs has a series of Nordic Semiconductor SoC projects previously reported on including Papyr, a Bluetooth E-Paper Display and Bluey, a BLE Development board using the Nordic nRF52832, and CNXSoft also published an article comparing several of the Nordic SoC available in development boards for Bluetooth 5 (BLE5). The Features the Stand Out Blip has a Black magic Probe compatible programmer and debugger built-in, along with a temperature/humidity sensor, ambient light intensity sensor, and a three-axis accelerometer. The board is designed to prototype very low power devices and an ability […]

September 26, 2019February 16, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

USB Armory Mk II USB Linux Computer Targets Security Applications (Crowdfunding)

Back in 2014, Inverse Path launched USB Armory computer dongle running headless Linux from a MicroSD card and designed for security applications. The company got bought by F-Secure Foundry in 2017, and the latter has now launched another crowdfunding campaign for an upgraded version USB Armory Mk II keeps a similar USB dongle form factor but replaces the NXP i.MX53 Cortex-A8 processor with a more efficiency NXP i.MX 6ULZ Arm Cortex-A7 processor, the USB type-A port with a modern USB-C port, adds 16GB eMMC flash, Bluetooth 5 LE connectivity, and new security features. USB Armory Mk II specifications: SoC – NXP i.MX6ULZ Arm Cortex-A7 @ 900 MHz System Memory – 512 MB DDR3 RAM Storage – 16 GB eMMC flash + external microSD Connectivity – Bluetooth 5 LE + mesh module (U-blox ANNA-B112) with Arm Cortex-M4 MCU (nRF52832) USB – 2x USB type-C ports: 1x DRP (Dual Role Power) receptacle […]

September 24, 2019May 3, 2023 by Stephen Vicinanza - No Comments

HealthyPi v4 Wearable WiFi Vital Signs Monitor Follows Raspberry Pi HAT Form Factor

HealthyPi v4 Campaign Starts ProtoCentral has started a Crowd Supply campaign for the HealthyPi v4, its latest vital signs monitoring dev kit. The HealthyPi v4 is wearable, wireless, and can be mounted on a Raspberry Pi. The units are all open source and stand-alone made for end-users, students as well as researchers and developers. An Improvement on HealthyPi v3 The recent increase in health-related tech has fueled ProtoCentral’s desire to bring its HealthyPi v3 up to current usability and development standards. The retail versions of the HealthyPi v4 are made specifically to work in conjunction with the Android OS for ease of use and mobility. Also, the Raspberry Pi HAT form factor is also supported in this version of the device. Articles On Health-Related Development The articles that have touched on health-related issues and topics from our archives, as well as very recently include HEGduino a neurofeedback monitor and […]

September 23, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Piper Computer Kit 2 is a DIY Raspberry Pi 3 Computer for Kids’ Education

Kids can easily build theirs own computer and then learn more about electronics and programming thanks to Piper Computer Kit 2. The kit is based on Raspberry Pi 3 SBC, a 9″ display, a power bank, and all bits and pieces required for assembly. There’s also a 16GB microSD with the OS and the company’s PiperCode software to learn the basics of programming. The complete kit comes with the following items: SBC – Raspberry Pi 3 Model B Storage – 16GB MicroSD card Display – 9″ 1024 x 600 LCD display with HDMI cable Audio – Integrated speaker 25+ laser-etched wooden and acrylic pieces 50+ hardware pieces 20+ electronic components Battery – 7,800 mAh rechargeable battery/power bank Phillips-head screwdriver 8 square foot laminated blueprint USB Mouse This is whay it looks like after around two hours of assembly time. Kids can then start playing Raspberry Pi Edition Mineccraft and some […]

September 22, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

PUCK 2 Bluetooth to IR Bridge Allows you to Control Appliances from your Android or iOS Phone

We’ve already seen there are several solutions to control IR appliances such as air conditioners or (dumb) televisions via your smartphone thanks to solutions such as ZaZa Remote that adds an IR transmitter to your 3.5mm audio jack or more recently via your USB-C port. If you don’t quite like having extra hardware connected to your smartphone WiFi to Infrared bridges such as the compact and omnidirectional Broadlink RM Mini 3 are cost-effective solutions, although you’d need one in every room where you wish to control appliances. I’ve recently noticed an even smaller “smartphone to IR” solution with PUCK v2 Bluetooth to IR bridge. The full technical details about PUCK 2 have not been made available, but we do know it’s a Bluetooth 4.2 to infrared remote bridge that transforms any iOS or Android device into a remote. The infrared LED has a range of about 4.5 meters, while Bluetooth […]