Testing Category - Page 54 of 169 - CNX Software

June 21, 2020 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Checking Out Raspberry Pi OS 64-Bit on Raspberry Pi 4 8GB RAM

The Raspberry Pi 4 with 8GB RAM launched a couple of weeks ago together with the beta version of Raspberry Pi OS 64-bit. Note that you should currently use the 32-bit version of Raspberry Pi OS (previously known as Raspbian) as the 64-bit still has bugs and missing features, but I want to find out the current progress, so I installed raspios_arm64-2020-05-28/2020-05-27-raspios-buster-arm64.zip and had no problem to boot the board. Raspberry Pi OS 64-bit System Information After going through the setup wizard in the desktop environment to configure the language, time, networking, etc…, and make sure the OS is updated, I checkout some information:

pi@raspberrypi:~ $ cat /proc/cpuinfo 
processor	: 0
BogoMIPS	: 108.00
Features	: fp asimd evtstrm crc32 cpuid
CPU implementer	: 0x41
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0xd08
CPU revision	: 3
...
Hardware	: BCM2835
Revision	: d03114
Serial		: 10000000694c8ae2
Model		: Raspberry Pi 4 Model B Rev 1.4

pi@raspberrypi:~ $ cat /proc/cpuinfo

processor : 0

BogoMIPS : 108.00

Features : fp asimd evtstrm crc32 cpuid

CPU implementer : 0x41

CPU architecture: 8

CPU variant : 0x0

CPU part : 0xd08

CPU revision : 3

...

Hardware : BCM2835

Revision : d03114

Serial : 10000000694c8ae2

Model : Raspberry Pi 4 Model B Rev 1.4

I do have a Raspberry Pi 4 Model B Rev 1.4 with 8GB Memory (revision: d03114), the image comes with a 64-bit Linux kernel:

pi@raspberrypi:~ $ uname -a
Linux raspberrypi 5.4.42-v8+ #1319 SMP PREEMPT Wed May 20 14:18:56 BST 2020 aarch64 GNU/Linux

1 2	pi@raspberrypi:~ $ uname -a Linux raspberrypi 5.4.42-v8+ #1319 SMP PREEMPT Wed May 20 14:18:56 BST 2020 aarch64 GNU/Linux

and we do get a 64-bit rootfs.

pi@raspberrypi:~ $ file /bin/busybox 
/bin/busybox: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, for GNU/Linux 3.7.0, BuildID[sha1]=fdf7b3dd496e8fd678a0bda5540f9fae4d313d8f, stripped

1 2	pi@raspberrypi:~ $ file /bin/busybox /bin/busybox: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, for GNU/Linux 3.7.0, BuildID[sha1]=fdf7b3dd496e8fd678a0bda5540f9fae4d313d8f, stripped

All good. Known issues Before starting the review, let’s make ourselves aware […]

June 18, 2020July 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Beelink GS-King X Review – Part 1: Unboxing & Teardown

Beelink GS-King X is a 3-in-1 media center that works as an Android 9.0 TV box, a NAS with support for two 3.5″ hard drives, and a HiFi audio system with two ESS9018 audio DACs powering RCA and balanced audio outputs. The company sent a review sample, and I’ll start by checking out the hardware and accessories, show how to install the hard drive(s), and attempt to tear down the device to check what it’s really made of. Beelink GS-King X Unboxing There’s no mention of TV box nor Android on the package, just “STORAGE” and DTS plus Dolby Audio… The bottom of the package lists the Beelink GS-King X specifications which we already discussed in our previous articles. There’s a red ribbon that helps to take the device out of its package. I wish more companies would do this. Accessories include the voice remote control, an HDMI cable, a […]

June 14, 2020June 14, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

ZS1100A IoT Power Meter Supports Sigrok Open-Source Software (Crowdfunding)

A few months ago, I tested Qoitech Otii Arc power meter & DAQ system designed for developers of IoT devices, and fount out it would be incredibly useful to developers of battery-operated devices since it shows voltage and current graphs synchronized with the serial output making it easy to see where software might be optimized. The system can also capture analog and digital signals from the DUT and emulate batteries with user-defined characteristics. But this weekend, I’ve come across a very similar solution with ZS1100A IoT power meter that also happens to be compatible with Sigrok open-source signal analysis software, and the corresponding Pulseview GUI. ZS1100A IoT power meter specifications: Measurements Output Voltage Range – 0 to 6 V programmable in 10 mV steps with +/- 5mV accuracy, Current Measurement Range – -0.5 A to 1.5 A (linear range) with < 0.1 μA resolution, accuracy of 1% of measured value […]

June 11, 2020November 7, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

DFI Ryzen Embedded R1606G SBC Review – Part 2: Windows 10 Enterprise LTSC

DFI GHF51 is an AMD Ryzen Embedded R1606G SBC for industrial application that’s about the size of the Raspberry Pi Model B board, and after checking out the hardware in the first of part of the review “DFI GHF51 AMD Ryzen Embedded SBC Review – Part 1: Unboxing and Assembly“, I’ve now had time to play with the board running the pre-installed Windows 10 Enterprise LTSC operating system. DFI GHF51 Hardware Connections Since there aren’t any full-sized USB ports, you’ll need a USB-C hub to get started as you’ll probably want to connect a USB keyboard and mouse for development and testing, as well as a Micro HDMI cable to connect to a TV or display. I tried both MINIX NEO C Plus and Dodocool DC30S USB Type-C hubs, and the former did not work at all, while the latter mostly worked. I also connected an HDMI cable to the […]

June 5, 2020November 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

M5Stack Atom Echo Coin-Sized Bluetooth Speaker is Powered by ESP32-PICO-D4 SiP

M5Stack has just launched Atom Echo, a coin-sized programmable Bluetooth speaker based on Espressif Systems ESP32-PICO-D4 system-on-package. The company sent me an early sample to play with before launch… but let’s have a look at the specification before checking the device further. Specifications: SiP – Espressif Systems ESP32-PICO-D4 system-in-package with ESP32 dual-core processor @ 240MHz Wi-Fi, BLE 4.0 and 4MB flash Audio 0.5W/NS4168 I2S speaker SPM1423 PDM microphone Expansion 5-pin + 4-pin headers with 6x GPIOs, UART, 5V, 3.3V, GND 4-pin digital Grove header with 2 I/Os, 5V and GND Misc – RGB LED (SK6812), Function (Top – G39 pin) and reset buttons (side), IR LED Power Supply – 5V/500mA via USB-C port Dimensions – 24 x 24 x 17mm (plastic material) Weight – 10 grams The Bluetooth speaker is really small, but you may think CNXSoft has big hands and fat fingers so it makes the speaker smaller than […]

May 14, 2020August 14, 2020 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

DFI GHF51 AMD Ryzen Embedded SBC Review – Part 1: Unboxing and Assembly

Earlier this year, Taiwan based DFI launched GHF51 Ryzen Embedded R1000 SBC offering some similarities with Raspberry Pi 4 SBC, including a business card form factor, two Micro HDMI ports, and Gigabit Ethernet. But the comparison stopped there, as DFI GHF51 board will vastly outperform the Raspberry Pi 4 boards both in terms of CPU and graphics performance due to AMD Ryzen processor, and DFI embedded board does not target hobbyists nor students, but instead business and industrial customers. The company recently contacted CNX Software, and send GHF51 board with all accessories for review. I was pretty excited since it’s the first AMD Ryzen Embedded SBC that I’ll review, so it should be particularly interesting. I’ve just received the sample and will do a two-part review starting with unboxing and kit assembly, before publishing the second part of the review reporting on my experience with Windows 10 and/or Ubuntu 20.04. […]

May 12, 2020May 12, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Lnav Log Files Navigator Helps You Analyze Log Files in a Mac OS or Linux Terminal

If you have a problem with your computer, you may have to go through log files, or as a software engineer, you may be looking for clues about a bug in a debug or error log. It can be done in any text editor, but there may be a better way thanks to lnav Log Files Navigator that allows checking those files more easily and efficiently in a Mac OS or Linux terminal. The following log files are supported by default even if they are compressed with gzip or bzip2: Common Web Access Log format CUPS page_log Syslog Glog VMware ESXi/vCenter Logs dpkg.log uWSGI “Generic” – Any message that starts with a timestamp Strace lnav is open-source software released under a BSD-2 clause in Github. It’s not new at all as some commits were made in January 2010, but it’s new to me, and hopefully to some of you as […]

May 5, 2020 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

How I Quadrupled Internet Speed in a Resort Room… with a Rope

I just temporarily moved into a room, or more exactly a small bungalow, and with my line of work I kind of need decent internet. I was told they had “WiFi”, and when I tried it out, I could log in fine, but the speed was pretty dismissal. I repeated the test close to the router and it achieved speeds I could easily live with. I happened to have a repeater with me, but it did not help as the only place I could plug was just outside my room, right under a roof, and performance was even worse (around 1 Mbps). So I had a closer look at the router installation, about 10 meters from my room, and realized it was basically stuck under a roof, which should block signals somewhat, but I’m just not sure how much… So I moved the router down, letting it hang by its […]