Testing Category - Page 49 of 169 - CNX Software

January 24, 2021January 25, 2021 by Jean-Luc Aufranc (CNXSoft) - 45 Comments

Getting Started with Raspberry Pi Pico using MicroPython and C

Raspberry Pi Pico board was just launched last Thursday, but thanks to Cytron I received a sample a few hours after the announcement, and I’ve now had time to play with the board using MicroPython and C programming language. I went to the official documentation to get started, but I had to look around to achieve what I wanted to do, namely blinking some LEDs, so I’ll document my experience with my own getting started guide for Raspberry Pi Pico using a computer running Ubuntu 20.04 operating system. The instructions will be similar for Windows and Mac OS. Preparing the hardware In theory, we could just get started with the board alone, but since I got some headers with my board, I also took the opportunity to try out Pine64 Pinecil soldering iron powered by MINIX NEO P2 USB-C power supply. The soldering iron worked great for about one minute, […]

January 18, 2021January 19, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Cybovac S31 Review – A smart robot vacuum cleaner with visual SLAM support

I’ve been asked to review robot vacuum cleaners in the past but refused because they were quite basic with a simple vacuum function, obstacle detection, maybe a mopping function, and not much else. But Kyvol Cybovac S31 is different as it integrates a laser distance sensor (LDS) enabling visual SLAM to create a map of your house, and can be controlled with a mobile app for Android or iOS which ended up even more useful than I initially expected. S31 Smart Robot Vacuum Cleaner Unboxing The package was much bigger than I expected, mostly because the charging station also includes a dust bag where dust from the main unit is automatically vacuumed each time cleaning is complete. Key features of the system as shown above: LDS robot vacuum cleaner (main unit) 4 levels of suction power Cleaning modes – Auto, area, spot, edge Anti-drop and anti-collision features 2.4 GHz WiFi […]

January 15, 2021January 15, 2021 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

H2 Net Card adds four 2.5 GbE ports to ODROID-H2/H2+ SBC

ODROID-H2+ is already a cool single board computer with an Intel Gemini Lake Refresh processor, up to 32GB RAM, dual 2.5GbE networking, support for SATA and NVMe storage, dual 4K video output, and more. But in recent days, I’ve read people complaining recently announced WiFI 6 or WiFi 6E routers only had one 2.5 Gbps or 5 Gbps Ethernet jack and wanted all/more RJ45 connectors to be 2.5 GbE ports or greater. But if even the two 2.5GbE ports on ODROID-H2+ are not quite enough for your needs, Hardkernel H2 Net Card triples that amount by adding four extra 2.5 GbE to the x86 SBC. It also works on ODROID-H2, meaning you’d get the existing dual Gigabit Ethernet ports, plus the four 2.5GbE ports from the M.2 card. There’s no much in the way of specifications for H2 Net Card: 4x Ethernet ports up to 2.5 GbE via RTL8125 controller. […]

January 14, 2021January 14, 2021 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Pine64 mailbag – PinePhone postmarketOS Edition, PineCone BL602 board, and Pinecil soldering iron

Pine64 community was pretty busy last year with the launch of several products. Recently I’ve received a couple of packages with some of those products, namely PinePhone Community Edition: PostmarketOS, PineCone WiFi & BLE IoT board based on BL602 RISC-V SoC, and Pinecil soldering iron also based on a RISC-V chip for control, but this time GD32V generic-purpose MCU. I’ll most show what I have received without going into too many details, except for PinePhone which I have already set up and used for one hour or so. PineCone BL602 board I received PineCone at the end of last year in a separate envelope with the board only. There’s not much to it with the BL602 processor offering WiFI and Bluetooth, a USB-C port for programming and power, and a few I/Os. The board is interesting as it is the first RISC-V IoT board with wireless connectivity built into the […]

January 8, 2021January 8, 2021 by Karl Johnson - 7 Comments

Sainsmart Genmitsu 4030 review – Unboxing, mods, and first cuts

Karl here. This will be a long one but I haven’t had this much fun with a product review in quite some time. I don’t consider myself a complete noob with CNC routers but I have only scratched the surface. Learning new things really drives me and being able to make more permanent things is very satisfying. I have some experience with the Sainsmart 3018 CNC router. I had a lot of fun with it but the build volume was on the smaller side so really limited on what can be done with it. I still recommend it as a starter CNC router and as a good stepping stone to get your feet wet and the Genmistu PROVerXL4030 as the next step. I was able to make some cool things with the 3018 and I hope now to take it to the next level with the Genmistu 4030. Before we […]

January 3, 2021March 1, 2021 by Ian W MORRISON (Linuxium) - 42 Comments

Rock Pi X Review – An Atom x5 SBC running Windows 10 or Ubuntu 20.04

The ROCK Pi X is the first x86 SBC (single board computer) from Radxa and resulted from repeated enquiries about running Windows on their earlier ROCK Pi 4. The ROCK Pi X comes in two models (Model A and Model B) with each model having either 1GB, 2GB, or 4GB of RAM and either 16GB, 32GB, 64GB, or 128GB of eMMC storage. Additionally, the Model B includes WiFi and Bluetooth together with supporting Power over Ethernet (PoE) although this requires an additional HAT. Both Seeed Studio and Radxa provided samples and in this review, I’ll cover some performance metrics from both Windows and Ubuntu and also discuss the thermals. Rock Pi X Hardware Overview The ROCK Pi X is similar in size to a Raspberry Pi board… but with slightly different ports and port locations even when compared to the Raspberry Pi 4. It is physically slightly larger than its […]

December 23, 2020January 4, 2021 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

MINIX NEO J50C-4 Max mini PC review with 8GB RAM, 240GB SSD

Back in 2018 MINIX Introduced NEO J50C-4 Windows 10 Pro mini PC based on Intel Pentium J5005 Gemini Lake processor and fitted with 4GB RAM and 32GB eMMC flash. It never got released in this configuration, as due to Gemini Lake processors shortage the company relaunched it with a 64GB eMMC flash in 2019. Since then, the company launched the NEO J50C-4 Plus with a 240GB SSD and 4GB RAM, which I did not review. But now the Hong Kong company has introduced a new model with NEO J50C-4 Max equipped with 8GB RAM and 240GB SSD. I’ve just received a sample, but since the design and specifications are the same as the earlier NEO J50C model except for the SSD and RAM capacity, I’ll focus this mini review on the main differences, and small issues I had last year. NEO J50C-4 Max Unboxing The package looks familiar… And so […]

December 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

When USB-C to USB-A adapter meets USB PD charger…

USB-C PD charger and USB-C to USB-A adapter

MINIX NEO P1 is a 66W USB-C power supply/charger that can handle up to 3 devices, but I’m already using its big brother NEO P2 (100W) to power single board computers or other compatible devices that I may have to review. So instead, I plugged it in my bedroom’s power extension since it’s so tiny and provides three extra USB ports for charging devices. The problem is that two of those are USB-C ports, and I don’t own any USB-C to USB-C cable, so I went shopping for such cables, but soon realized I could probably “save money” by purchasing USB-C to USB-A adapters for less than one dollar each as I already own several USB-A to USB-C / micro USB cables. I got two of those and inserted them in the tiny USB PD charger. Spacing between the two USB-C ports was wide enough to the adapter fitted just […]