Testing Category - Page 13 of 164 - CNX Software

December 14, 2023February 4, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

GEEKOM Mini IT12 Core i7-12650H mini PC review – Part 1: unboxing, teardown, and first boot

GEEKOM Mini IT12 is a 12th Gen Intel mini PC offered with either an Intel Core i7-12650H or Intel Core i5-12450H Alder Lake processor, support for up to 64GB RAM, up to 2TB NVMe SDD, HDMI 2.0 video outputs and high-performance ports such as USB4 and 2.5GbE. The mini PC is also equipped with a WiFi 6E and Bluetooth 5.2 wireless module and comes preloaded with Windows 11 Pro operating system. GEEKOM has sent us a sample of the Mini IT12 with a 10-core Intel Core i7-12650H processor, 32GB DDR4, and a 1TB M.2 SSD for review. We’ll start the review by listing the specifications, before going and unboxing and a teardown, and finally boot the device to Windows 11 Pro. This will be followed by detailed reviews of the mini PC with Windows 11 and Ubuntu 22.04 in the next few weeks. GEEKOM Mini IT12 specifications SoC – Intel […]

December 14, 2023January 9, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Mixtile Core 3588E development kit review – Part 1: Unboxing and first boot

Mixtile Core 3588E is a Rockchip RK3588 SO-DIMM system-on-module with up to 32GB LPDDR4 and 256GB eMMC flash that follows NVIDIA Jetson Nano, TX2 NX, Xavier NX, and Orin Nano form factor and should work with any board made for Jetson SO-DIMM modules. We first covered the module last April, but Mixtile is now shipping their Rockchip RK3588 module and sent us a development kit with the Mixtile Core 3588 SoM fitted with a fansink and a carrier board that looks quite similar to the NVIDIA Jetson Nano developer kit we reviewed a few years ago, although its design is closer to the new B01 developer kit as we’ll see below. We’ll start the review with an unboxing and first boot, before testing it in more detail with Ubuntu 22.04 in the second part of the review. Mixtile Core 3588E development kit unboxing We received the development kit fully preassembled. […]

December 13, 2023February 7, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Maxtang MTN-FP750 (Ryzen 7 7735HS) mini PC review – Part1: Specs, unboxing, teardown, and first boot

Maxtang MTN-FP750, also known as NUC-7735HS-A16, is a mini PC powered by AMD Ryzen 7 7735HS (or Ryzen 5 6600H) CPU with up to 64GB of memory, up to 2TB M.2 NVMe SSD, and ports such as HDMI 2.0, USB4, 2.5GbE, etc… It also optionally supports WiFi 6E and Bluetooth 5.2, takes a 2.5-inch SSD via an FPC connector, and optionally comes with Windows 11 Pro operating system with the company saying the mini PC is ideal for office retail and digital signage. Maxtang sent us an MTN-FP750 mini PC sample for review with an AMD Ryzen 7 7735HS, 32GB DDR5, and a 512GB M.2 SSD preloaded with Windows 11 Pro. Today we will look at the specifications, go through an unboxing, teardown the device to check out the hardware design and boot it up to make sure it works as expected. We will then review Windows 11 Pro and […]

December 10, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

UP 7000 SBC review – Part 2: Ubuntu 22.04 on a fanless Intel N100 single board computer

The UP 7000 is a credit card-sized Alder Lake-N single board computer that can be used as an alternative to the Raspberry Pi 5 for industrial applications. AAEON sent me a model with an Intel Processor N100 CPU, 8GB LPDDR5, and a 64GB eMMC flash, and I went through an unboxing in the first part of the review, compared its mechanical design to the earlier UP 4000 and Raspberry Pi 5 SBC , and also installed Ubuntu 22.04 since the UP 7000 board did not come with any OS and would initially boot to the UEFI shell. I’ve now spent more time with the board and I will report my experience with the UP 7000 SBC running Ubuntu 22.04 in this article checking out features, performance, video playback, power consumption, and so on using the UP 4000 review with Ubuntu 22.04 I did last year as a template plus some […]

December 8, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

LONGER Laser B1 30W review – A 33-36W laser engraver tested with LightBurn

Today we will review the LONGER Laser B1 30W laser engraver with the LightBurn program. The machine is equipped with a laser module comprised of six 6W laser diodes for a total power of 33 – 36 W when accounting for some variation in the power delivered by each diode. The Laser B1 can cut through 20 mm thick wood and 10 mm thick black acrylic in just one cut, and with multiple passes, it can also handle up to 25mm thick wood 50mm thick black acrylic, and even 0.1mm thick stainless steel. The kit comes with an air pump to improve the cutting ability and prevent/limit burns around the engraving or cutting area, and has a working area of 450 x 440 mm. Laser B1 30W specifications Laser Technology – Diode Laser Technology Work area – 450x440mm (17.72×17.32-inch) Laser wavelength – 50nm Focal length – Fixed Focus-50mm Laser spot […]

December 6, 2023December 8, 2023 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Youyeetoo X1 x86 SBC Review – Part 2: GPIO, UART, I2C, SPI, NFC, PoE module, and power consumption

The Youyeetoo X1 x86 single board computer (SBC) with an Intel Celeron N5105 Jasper Lake CPU differs from a typical Intel or AMD mini PC by its range of IOs including SPI, I2C, UART, NFC connectivity, and support for PoE module that you won’t find in a typical computer, and that’s what we will test in the second part of the X1 SBC review along with power consumption. The Youyeetoo X1 SBC is also different from Arm-based single board computers since we can just install any x86-compatible operating system by ourselves, and w don’t need to flash a board-specific image like we would do with Arm SBCs and peripherals such as SPI, I2C or UART may be or may not usable immediately due to lack of supported drivers. We’ve already installed Ubuntu 22.04 on the Youyeetoo X1 in the first part of the review, so in the second part, we’ll […]

December 4, 2023February 4, 2024 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Review of GEEKOM Mini Air12 Processor N100 mini PC – Part 1: unboxing and teardown

GEEKOM Mini Air12 is a mini PC powered by the popular Intel Processor N100 CPU and coupled with 16GB DDR5 SO-DIMM memory, a 512GB NVMe SSD upgradable up to 1TB. The Windows 11 Pro mini PC also features USB 3.2 Gen 2 USB Type-C ports, HDMI 2.0 video output, gigabit Ethernet, as well as WiFi 6 and Bluetooth 5.2 via an Azureware module. GEEKOM sent us a sample of the Mini Air12 for review. Since we’ve already written about the Mini Air12 specifications, today we will go through an unboxing and look at the hardware design with a teardown, before testing the mini PC in more detail with Windows 11 and Ubuntu 22.04 in the next parts of the review. GEEKOM Mini Air12 Unboxing We received the mini PC is a retail package that protects the device and accessories inside well. The back side of the package lists some basic […]

December 2, 2023December 2, 2023 by Karl Johnson - 6 Comments

Genmitsu Z5-1 fiber laser engraver review

Good day. Karl here. Today I would like to share my experiences with the Genmitsu Z5-1 fiber laser engraver in this review. What is an infrared Galvo laser? A fiber laser is also known as an infrared Galvo laser. Let’s break this combination of words down. Infrared is first. Up to this point, I have reviewed several powerful blue diode lasers for the site. All of them have had 455nm wavelength lasers. In contrast, the Genmitsu Z5-1 laser we are looking at today has a 1064nm wavelength that is outside of the visible spectrum. With infrared, we can mark different materials. Notable plastics and metals are easy to mark with this laser. Galvo is next and was a term I was not familiar with. “Galvo” is a condensed form of “galvanometer.” It’s an electromechanical device used for precise mirror or optical element control in laser and optical systems. Galvanometers are […]