Texas Instruments SimpleLink Category - Page 3 of 4 - CNX Software

April 6, 2020April 6, 2020 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

MIOTY Silicon Vendor Agnostic, Scalable LPWAN Standard to Take on LoRaWAN, NB-IoT

[April 6th update: The article was updated to reflect Fraunhofer invented the technology] There are plenty of LPWAN (Low Power Wide Area Networks) standards designed for low power, low bitrate and long-range connectivity with the most popular currently being NB-IoT and LoRaWAN. But Texas Instruments has joined other smaller companies (Fraunhofer, Ragsol, STACKFORCE, WIKA…) to form the MIOTY alliance in order to develop and promote a new LPWAN standard operating in the sub-GHz range called MIOTY. Texas Instruments explains MIOTY was born due to a lack of scalability and robustness (interferences issues) of current LPWAN solutions. But just like other similar low power WAN standards, it aims to support long-range while achieving long battery life, but MIOTY is also supposed to help IoT developers mitigate performance degradation in high-node-count networks. MIOTY works in the same license-free bands (868 MHz, 915 MHz …) as LoRa radios with no costs involved to […]

March 23, 2020March 23, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

$4 ITEAD CC2531 Zigbee USB Dongle Works with Zigbee2MQTT Out of the Box

Some of ITEAD Studio’s Sonoff home automation devices include Zigbee connectivity with for instance Sonoff BASICZBR3 smart switch or a version of Sonoff S31 smart socket with integrated Zigbee. Those devices usually work via a Zigbee enabled gateway that could be a router, Raspberry Pi SBC, or mini PC, which ITEAD did not offer so far. But to help people making their own Zigbee gateway the company is now selling a low-cost ($3.99) CC2531 USB dongle preloaded with CC2531ZNP-Prod firmware (Zigbee coordinator firmware), and compatible with Zigbee2MQTT open-source Zigbee to MQTT bridge once plugged into a PC, Raspberry Pi, or another Linux SBC. ITEAD CC2531 Zigbee USB dongle specifications: MCU – Texas Instruments CC2531F256 Zigbee and IEEE 802.15.4 wireless MCU with 8kB RAM, 256kB Flash pre-loaded with CC2531ZNP-Prod firmware for zigbee2mqtt application Host Interface – USB 2.0 male port Expansion – 8-pin unpopulated header with 8 I/Os Debugging – Debug […]

March 11, 2020 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Electrolama to Launch 802.15.4/Zigbee USB Dongle and Raspberry Pi “HAT”

Electrolama (@omerk and friends) has been working on two open-source hardware 802.15.4/Zigbee projects with “zig-a-zig-ah” (aka “zzh”) USB stick based on Texas Instruments CC2652R SimpleLink multi-standard wireless MCU and Zoe (Zigbee + Poe) development board based on Raspberry Pi HAT form factor and powered by TI CC2530 SimpleLink 2.4 GHz SoC alongside CC2592 range extender. Both boards are released under an Apache-based Solderpad Hardware License 2.0, and target users of the Zigbee2MQTT project. The boards could soon also get native support in Home Assistant via the “zigpy-cc” library which adds support in ZHA (Zigbee Home Automation) integration component. Zig-a-zig-ah USB Stick Preliminary specifications: WiSoC – Texas Instruments CC2652R SimpleLink multi-standard wireless MCU with support for Thread, Zigbee, Bluetooth 5 Low Energy, IEEE 802.15.4g, 6LoWPAN, and proprietary systems. (Note: CC2652RB is also considered as it does not require an external crystal oscillator) Host Interface – USB via CH340 USB-UART bridge Misc […]

February 3, 2020March 16, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Reolink Argus PT Review – A Solar powered Pan-Tilt Security Camera

Last year, I reviewed Reolink Argus Eco solar powered security camera, and I’m still using it to date. It’s working fairly well, although sometimes motion detection will not be triggered, or triggered too slowly so it’s not impossible to miss important footage. The PIR function can be tweaked so maybe it’s just a question of finding the right settings for a given location. Nevertheless, the company has now launched a new model called Reolinkg Argus PT that is very similar to the Argus Ego but with PT (Pan, Tilt) function, and I received a sample for review. Since both models are so similar, I recommend reading Argus Eco review first, as I’ll focus on the differences. Reolink Argus PT Unboxing I received two packages like las time: the camera itself, and Reolink solar panel. The camera comes with a WiFi antenna, a wall-mounting set, a USB cable, and some documentation. […]

January 30, 2020September 4, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Gateworks GW16122 IoT mPCIe Card Comes with Long Range Sub-GHz and 2.4GHz Radios

Gateworks GW16122 Dual-Band IoT mPCIe Card

Gateworks GW16122 is a mini PCIe card that adds sub-GHz and 2.4GHz radio to the company line of Ventana and Newport Linux SBC’s, and is meant for industrial IoT (IIoT) applications as an alternative to LoRa and Sigfox. The second generation of the card is based on Texas instruments CC1352P dual-band wireless SoC that supports Wireless M-Bus, IEEE 802.15.4g, 6LoWPAN, KNX RF, and Wi-SUN at sub-GHz frequencies (EU: 868MHz, US: 915MHz), and Bluetooth 5 Low Energy, Thread, and Zigbee at 2.4 GHz. Gateworks GW16122 key features and specifications: MCU – Texas Instruments CC1352P Arm Cortex-M4F MCU @ 48 MHz with 352KB flash, 80KB SRAM, dual-band wireless radio transmitter/receiver Radios Sub-1 GHz Radio 868MHz EU, 915 MHz US (default) Low Power, sensor nodes can run on a coin-cell battery -121dBm Receive Sensitivity for long-range communication 20dBm Output Power Texas Instruments TI-RTOS and TI-15.4 Stack M-Bus, IEEE802.15.4g, Contiki 6LoWPAN, Wi-SUN, KNX RF […]

August 20, 2019August 20, 2019 by Siji Sunny - 5 Comments

mDash Cloud platform for IoT Devices Targets ESP8266/ESP32, STM32, and TI CC3220 Wireless MCUs

Cesanta (a company based in Dublin, Ireland) recently launched mDash – an IoT cloud platform for administration of various IoT modules. This platform supports Espressif’s modules ESP32 & ESP8266, STM32 (L4,M4) and TI CC3220, and offers a bunch of features which are known to be challenging tasks in the IoT world. This includes OTA (Over-The-Air) firmware updates, remote configuration and administration, alerts and notifications, remote device control and file management. This can be achieved through 3 programming platforms – Arduino IDE, ESP-IDF and through Mongoose OS. For evaluation and testing purpose mDash offers a simulator that run as a docker container. Refer our previous post, to understand how to get started with Cesanta’s Moongoose OS for ESP8266. Basic WorkFlow mDash Library The company offers reference firmware/library for the defined hardware platforms. This been implements by using secure MQTT for communication, re-connection and initial provisioning with mDash cloud. You can find […]

June 16, 2019June 16, 2019 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Reolink Argus Eco Review – A Sub-$100 Solar Powered Security Camera

Reolink Argus Eco IP Camera Wall Mounted

I’ve been thinking about installing one or more IP camera in my home for a while, and for ease of installation and considering I’m renting, my preference was to go with one of those battery IP cameras similar to Amazon (Immedia) Blink IP camera or Eufy EverCam security camera that last six months to one year on a single charge. But earlier this year I came across Reolink Argus 2 battery powered security camera that looks like good value at $100, and also came with an optional solar panel so you don’t have to ever charge the camera. The company latter contacted me to know whether I’d be willing to try out their latest Reolink Argus Eco camera with similar features but an even lower $89.99 price tag. I got my sample a few weeks ago, and I had time to install it, and play around with the camera during […]

October 3, 2018October 3, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

BLE Micro is a Tiny, Coin-Cell Powered Bluetooth 4.0 Development Board

DFRobot Bluno is a Bluetooth 4.0 LE development board following Arduino UNO form factor, and powered by TI CC2540 chipset. The board sells for $24.90 on their online store, and the company provides firmware and mobile app source code, but if you ever wanted a similar solution in a much smaller form factor, and powered by a coin cell battery, the company has now launched BLE Micro board. BLE Micro board specifications: Bluetooth Chip – Texas Instruments CC2540 8051 MCU with USB, Bluetooth 4.0 LE connectivity Wireless Connectivity Frequency: 2.4GHz Transfer rate: ≤1Mbps Modulation: GFSK, Bluetooth low power, V4.0 Sensitivity: -93dB Transmission distance – 30m in free space USB – 1x micro USB port Expansion – 21 through holes with reset, power signals, UART, and GPIOs. Input Voltage: +3.3 DC Power Consumption – Working: 10.6mA average, ready mode:8.7mA Temperature Range – -10 ℃ ~ +65 ℃ Dimensions – 49mm x […]