Texas Instruments OMAP 3 Category - Page 4 of 8 - CNX Software

March 2, 2012 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Free Electrons Releases Embedded Linux Training Materials

Free Electrons, a technology company offering embedded Linux consulting services as well as embedded Linux training, has released their training materials for Linux and system development for embedded systems including their Lab sessions. The training materials are available in their git repository in LaTeX format. If you want the latest documentation in PDF, you’ll need to build it by following those steps: Install the required packages:

sudo apt-get install git dia inkscape texlive-full python-pygments

1	sudo apt-get install git dia inkscape texlive-full python-pygments

Get the embedded Linux slides source:

git clone <a href="git://git.free-electrons.com/training-materials.git">git://git.free-electrons.com/training-materials.git</a>

1	git clone <a href="git://git.free-electrons.com/training-materials.git">git://git.free-electrons.com/training-materials.git</a>

Build the training materials:

cd training-materials
make full-sysdev-labs.pdf
make full-kernel-labs.pdf
make full-sysdev-slides.pdf

cd training-materials

make full-sysdev-labs.pdf

make full-kernel-labs.pdf

make full-sysdev-slides.pdf

The last three commands will generate the PDF files respectively: full-sysdev-labs.pdf – Embedded Linux Training Lab Book (58 pages) with instructions for the IGEPv2 board based on on TI DM3730 or OMAP3530. full-kernel-labs.pdf – Linux kernel and driver development training Lab Book (37 pages) full-sysdev-slides.pdf – Embedded Linux system development presentation slides (506 pages) Free Electrons also have slightly older version of full-kernel-labs.pdf and full-sysdev-slides.pdf available for download as PDF so […]

February 26, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ubuntu on ARM: Improvements and Optimizations Done by Linaro – ELCE 2012

Ricardo Salveti de Araujo, developer platform lead for Linaro, displays the improvements Linaro have added to Ubuntu on ARM. Abstract: Since Linaro’s start, there was a need to have a supported platform for ARM, that could use the Linaro changes, to improve the ARM experience in general and to show the results of the work done by Linaro. In this session, it’ll be presented why Ubuntu was selected as the base platform for Linaro, describing the benefits and the areas Linaro is continuously investing to improve it. It’ll also be described the current state of the platform, showing some of Linaro’s achievements and also how we’re working to support the main SoC boards available, like Panda, Beagle, Origen, iMX53 and Snowball with the latest development by Ubuntu and Canonical, like Ubuntu TV, Phone and Tablet. You can also download the presentation slides. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 […]

February 26, 2012February 26, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

The Yocto Project Overview and Update – ELC 2012

Saul Wold, User Space Architect at Intel Open Source Technology Center, discusses the latest on the Yocto Project at the Embedded Linux Conference 2012. Abstract: The Yocto Project is a joint project to unify the world’s efforts around embedded Linux and to make Linux the best choice for embedded designs. The Yocto Project is an open source starting point for embedded Linux development which contains tools, templates, methods and actual working code to get started with an embedded device project. In addition, the Yocto Project includes Eclipse plug-ins to assist the developer. This talk gives a walk-through of the key parts of the Yocto Project for developing embedded Linux projects. In addition, features will be described from the latest release of Yocto. At the end of the talk, developers should be able to start their own embedded project using the Yocto Project and use it for developing the next great […]

February 7, 2012February 7, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Mentor Embedded Linux Kits for BeagleBoard and PandaBoard

Mentor Embedded has recently released free Linux Kits for the BeagleBoard (TI OMAP3) and Pandaboard (TI OMAP4) low cost development boards. Both Mentor Embedded Linux (MEL) kits include: Mentor Embedded Linux Lite, a pre-built Yocto-based distribution, including libraries and headers A Linux Board Support Package (BSP) for your reference board A pre-built filesystem for the target Sourcery CodeBench Lite for application development Installation / Application Development Guides Since Mentor Embedded provides the “Lite” version of their kits, some of the tools mentioned in the diagram above (e.g. Codebench IDE, System Analyzer…) are not available in the free kits. After free registration, you can download the 2 kits on Mentor Embedded website: PandaBoard Linux Kit BeagleBoard Linux Kit and you’ll have access to 3 downloads: Mentor Embedded Linux Kit Installer Quick Start guides Source files which are optional. You can get support for the kits via Mentor Embedded Linux mailing list. […]

January 28, 2012January 28, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Archos Gen8 Firmware Version 2.4.82 Released

Archos has released a new firmware for Archos 28/32/35/43/70/101 internet tablets (Generation 8). This is a bug fix version, no Android 2.3 (Gingerbread) here. Here’s the changelog: Version 2.4.82 – January 25th, 2012 USB host: fix host not working anymore on some A101 units Archos 35 home connect: allow to change temperature unit in weather clock Video: improve playback of some FLV files The firmware can be downloaded at http://update.archos.com/8/gen8/gen8_2.4.82/firmware_archos_android_gen8.aos Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

January 25, 2012January 25, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

The Past, Present and Future of Ubuntu for ARM

David Mandala of Canonical talked at Linux.Conf.Au on 18th of January 2012 about Ubuntu for ARM and the move from netbook to server support. You can read my notes below, or jump at the end of this post to watch the presentation. The Past 2008: Ubuntu decides to only support ARMv7 architecture vs. Debian that supports ARMv4 and above. 2009: Ubuntu release for Freescale i.MX51 (ARMv5 built), and then Marvell ARMAVA with ARMv6 and VFP (ARM floating point unit) support. 2010: April (10.04) The first ARMv7 release for OMAP3 (Beagleboard) with VFP, Thunb2, NEON and SMP for ARM and first netbook edition October (10.10) Pandabord (OMAP4) release with initial device tree support for ARM. Starts work with Linaro. 2011: 11.04 (5th release) – Supports OMAP3 and OMAP4 only. The netbook edition is using Qt, further improvement to device tree, further work with linaro and on the way to the Unified […]

January 13, 2012January 13, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Parrot AR.Drone 2.0: Linux based Augmented Reality Helicopter

Parrot announced a revised version of its Linux-based Parrot AR Drone “quadricopter” flying drone at CES 2012. The drone can now be operated with any Android device such as smartphones and tablets, whereas the previous version could only be controlled by an iPhone or iPad. Another new software features is the auto-pilot. The quadricopter body has been redesigned and reinforced, and fitted with a new 720p HD front-facing navigational camera which can record video and help the pilot navigating the drone. There is also a vertical camera that was present in the first generation. Here are the technical specializations of the Drone’s motherboard: 1 GHz 32-bit ARM Cortex A8 processor (Maybe OMAP3?) 800Mhz video DSP (TMS320DMC64x) 1GB DDR2 RAM USB 2.0 WiFi b/g/n . 3-axis accelerometer 3-axis gyroscope 3-axis magnetometer Pressure sensor for altitude measurement (altitude > 6m) Ultrasound sensor for ground altitude measurement (lower altitude) 60fps vertical QVGA camera […]

December 22, 2011 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Android 4.0 on Archos 70 G8 Tablet

“LeTama” has ported Android ICS to Archos G8 Tablet based on OMAP3630. The video below shows Android 4.0 running on Archos G8 70S. The user interface seems a bit sluggish at times, but this is an alpha version with only 3D/Touchscreen working and more work needs to be done to have a fully functional release. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com