Samsung Exynos Category - Page 25 of 36 - CNX Software

August 30, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linaro 13.08 Release With Linux Kernel 3.11 and Android 4.3

Linaro 13.08 has been released with Linux Kernel 3.11-rc6 (stating), Kernel 3.10.9 (LSK – beta), and Android 4.3. This month is the first release based on Android 4.3, which was only pushed to AOSP at the end of last month. I can also see work on new SoCs/hardware this month with Texas Instruments Keystone II ARM Cortex A15+DSP SoC and Fujitsu AA9 board (Which processor?, I could not find out). A lot of work also appears to have gone in OpenEmbedded, further optimizations have gone into NEON optimized AES encryption in OpenSSL, and more. It’s also the first time I can see a Ubuntu Raring engineering build image for HighBank (Calxeda Energycore). Here are the highlights of this release: Android Engineering Android stack was tuned to achieve 100% CTS pass result on Android 4.3 Analyzing the UEFI EDK II boot loader for Android completed, implementation of fastboot application and USB […]

August 26, 2013August 26, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Migoal TransMaker TR10 and TR11 Transform Your Samsung Galaxy S3 / S4 into a 10.1″ or 11.6″ Tablet or Laptop

If you’ve got an Samsung Galaxy S3 or S4 smartphone, and sometimes, you’d like to use it with a larger screen and a keyboard, there’s now a solution with Migoal TransMaker. The device does something similar to Motorola Lapdock, but it can support both tablet and laptop modes thanks to a detachable keyboard dock. You can use it by sliding your phone at the back of the tablet screen. TransMaker TR10 and TR11 specifications (Tablet): Display: TR10 – 10.1″ IPS touchscreen panel (1280×800 resolution) TR11 – 11.6″ IPS touchscreen panel (1920×1080 resolution) Audio – 1x2W Speaker + 3.5mm earphone jack USB – 1x micro USB port Buttons – Home, menu, back, power on/off, volume +/- Power: 1x DC-in 5000mAh Lithium battery Dimensions TR10 – 263 x 181 x 10.7mm TR11 – 305 x 192 x 11.5mm Net weight – TR10: 525g, TR11: 620g TransMaker TR10 and TR11 specifications (Keyboard dock): […]

August 17, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Texas Instruments OMAP5432 EVM Benchmarked Against ODROID-U2, BeagleBone Black, GK802… and an Intel Core i7-2600K based PC

Texas instruments and SVTronics announced an OMAP5 evaluation board a couple of months ago. The board features OMAP5432 dual Cortex A15, dual Cortex M4 SoC, 2GB RAM, a 4GB eMMC module, USB 3.0, SATA and more. SVTronics sent a board to Linux.com, where they wrote a short review, followed by an article benchmarking the OMAP5 EVM against AllWinner A10, Freescale i.MX6, Exynos 4412 Prime, and TI Sitara platforms, namely Cubieboard, GK802, ODROID-U2, and BeagleBone Black, all running Linux. Ben Martin, the writer, also benchmarked the board against a Linux PC powered by an Intel Core i7-2600K processor (4 cores, 8 thread, clocked at 3.4GHz, with a turbo frequency up to 3.8GHz). The board used was an early version, clocked at 800MHz, and later in September, all boards will be clocked at 1.5Ghz, so for benchmarks that stress the CPU, you could expect almost double the performance. With that in mind, […]

August 1, 2013August 3, 2013 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

$149 Hardkernel ODROID-XU Octa Core big LITTLE Development Board

Just a few days after noticing code for ODROID-XU in hardkernel repository, the company has now launched ODROID-XU development board powered by Exynos 5410 octa core processor with 2GB RAM, USB 3.0, and more for just $149 (as long as you order in August, $169 after that). Here are ODROID-XU hardware specifications: SoC – Samsung Exynos5 Octa Cortex-A15 and Cortex-A7 big.LITTLE processor with PowerVR SGX544MP3 GPU System Memory – 2GB LPDDR3 RAM Storage – micro SD slot, eMMC 4.5 connector Video Output – micro HDMI + MPI LCD interface and Touch screen I2C ports (IPEX-40PIN) Audio – micro HDMI, headphone jack, MAX98090 Audio Codec Connectivity – 10/100M Ethernet via USB 2.0 (LAN9730) USB – 1x USB 3.0 Host, 1x USB 3.0 OTG, and 4x USB 2.0 Host Expansion Header – 30 pins (GPIO/IRQ/SPI/ADC) Misc – PWM connector for Cooler, Power Supply – 5V/4A (Plug specification is inner diameter 2.1mm and […]

July 31, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linaro 13.07 Release With Linux Kernel 3.10.1 and Android 4.2.2

Linaro 13.07 has been released with Linux Kernel 3.10.1 (both baseline and stable versions), and Android 4.2.2. It’s summer time, so activity seems to have slowdown a bit, yet improvements have done to LAVA with the first LAVA Multi-purpose Prove (LMP) setup, and Linaro has released build with Linux 3.10.1, Ubuntu Raring, OpenEmbedded (ARMv8), and Android. For the very first time, there’s even an Android 4.2.2 community build for HiSilicon K3V2 hardware (HiSilicon Hi4511 development platform). Here are the highlights of this release: LAVA LAVA Core VExpress A9 test images no longer use the master image’s boot loader Support added for interactive bootloader commands. Support for OpenID / Crowd added for LAVA. LAVA Master images updated on images.validation.linaro.org LAVA Multi-node – Multi-Node support has an initial implementation which can support communication between nodes under test via the use of a GroupDispatcher. LAVA Lab Capabilities – LMP (LAVA Multi-purpose Probe) prototypes […]

July 30, 2013 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Hardkernel is Working on ODROID-XU Development Board Based on Exynos 5410 Octa Core Processor

Hardkernel have already done a good job at bringing low cost, high performance development boards based on Exynos 4 Quad processor with boards such as ODROID-X, ODROID-U2, or ODROID-X2. But it appears they are not stopping here, and have recently committed code to support ODROID-XU development board based on Exynos 5410, the 8-core big.LITTLE SoC from Samsung, used in devices such as Galaxy S4. The committed code linked above point the device tree files in arch/arm/boot/dts/ (exynos5410-odroidxu.dts and exynos5410-pinctrl.dtsi) where we can see the board will have 2 GB RAM, and the Cortex A15 cores with be clocked at 1.6 GHz. Exynos5410-odroidxu.dts has been removed from 3.11 branch, so the link above points to an earlier commit. Exynos 5410 might have been the first big.LITTLE processor ever available, but it comes with a major flaw, as it only supports cluster migration (all 4 Cortex A15 or all 4 Cortex A7 […]

July 23, 2013July 23, 2013 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Samsung Unveils a New Exynos 5 Octa (5420) With Greater CPU and GPU Processing Power

Samsung announced the first Octo-core ARM processor, and the first using big.LITTLE technolocy at CES 2013 in January, and today the company has announced a new Exynos 5 Octa (Exynos 5420) with a six-core ARM Mali-T628 MP6 GPU (interestingly ditching PowerVR SGX544MP3 in the process), as well as 4 ARM Cortex-A15 cores at 1.8GHz, and 4 Cortex-A7 cores at 1.3GHz. Samsung claims Mali-T628 MP6 boosts 3D graphic processing capabilities by over two times compared to the PowerVR SGX544MP3 GPU used in Exynos 5410. The ARM GPU also supports General-Purpose computing on Graphics Processing Units (GPGPU) to accelerate complex and computationally intensive algorithms or operations, with API such as OpenCL 1.1. This product also supports OpenGL ES 3.0 to enable the processing powered requires by high-end, complex games. Even it’s still using 4x Cortex-A15, 4x Cortex-A7 big.LITTLE processing configuration, the company claims CPU processing capability has been improved by about 20 percent […]

July 11, 2013 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Systena Tizen Tablet Hands-on Video

Systena, a Japanese company, is currently developing a Tizen tablet with a quad core Cortex A9 processor at 1.4Ghz, 2GB of RAM, and 32GB of storage. The tablet features a 10.1″display (1920×1080), supports 802.11b/g/n WiFi, and comes with a microSD card slot, as well as a 2MP rear camera and 0.3Mp front camera. Tizen Indonesia got a prototype of the tablet, and give it a try in the video below (no audio). We can see the boot, lock screen and gallery application. The system does not seem very fluid at this stage of development, but hopefully Tizen will be optimized for better performance before the final release. The system currently runs Tizen 2.0, but the company plans to upgrade to Tizen 2.1 for the developer version of the device, before selling the device to the general public. Via Liliputing and Tizen Experts Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 […]