Rockchip RK35xx Category - Page 15 of 35 - CNX Software

August 29, 2023August 29, 2023 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Orange Pi Compute Module 4 – A low-cost Rockchip RK3566-powered alternative to Raspberry Pi CM4

Orange Pi Compute Module 4 is a system-on-module mechanically and electrically compatible with the Raspberry Pi CM4, but powered by a Rockchip RK3566 quad-core Arm Cortex-A55 AI processor just like the Radxa CM3 introduced a few years ago, or more recently the Banana Pi BPI-CM2 (RK3568). The new module, also called Orange Pi CM4 for shorts, comes with 1GB to 8GB RAM, 8GB to 128GB eMMC flash, and an optional 128/256MBit SPI flash, as well as a Gigabit Ethernet PHY and on-board WiFi 5 and Bluetooth 5.0. It comes with the two 100-pin high-density connectors found on the Raspberry Pi CM4, and a smaller 24-pin connector for extra I/Os. Orange Pi Compute Module 4 specifications: SoC – Rockchip RK3566 quad-core Arm Cortex-A55 processor @ 1.8 GHz with Arm Mali-G52 2EE GPU, 0.8 TOPS AI accelerator, 4Kp60 H.265/H.264/VP9 video decoding, 1080p100f H.265/H.264 video encoding System Memory – 1GB, 2GB, 4GB, or […]

August 28, 2023August 28, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linux 6.5 release – Notable changes, Arm, RISC-V and MIPS architectures

Linus Torvalds has just announced the release of Linux 6.5 on the Linux Kernel Mailing List (LKML): So nothing particularly odd or scary happened this last week, so there is no excuse to delay the 6.5 release. I still have this nagging feeling that a lot of people are on vacation and that things have been quiet partly due to that. But this release has been going smoothly, so that’s probably just me being paranoid. The biggest patches this last week were literally just to our selftests. The shortlog below is obviously not the 6.5 release log, it’s purely just the last week since rc7. Anyway, this obviously means that the merge window for 6.6 starts tomorrow. I already have ~20 pull requests pending and ready to go, but before we start the next merge frenzy, please give this final release one last round of testing, ok? Linus The earlier […]

August 27, 2023August 30, 2023 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Cool Pi Arm Linux Laptop with Rockchip RK3588 SoM sells for $358 and up.

Cool Pi has put its CM5 Rockchip RK3588 system-on-module to good use by integrating it into a 14.1-inch laptop with 1920×1080 resolution running Android 12, Ubuntu 22.04, or other Linux distributions. The Cool Pi laptop comes with up to 32GB LPDDR4X memory, up to 256GB eMMC flash, features an M.2 socket for additional NVMe storage, as well as HDMI 2.1 video output and a USB-C port with DisplayPort Alt. mode to enable triple display setups with the laptop. Cool Pi laptop specifications: System-on-Module – Cool Pi CM5 SoC – Rockchip RK3588 octa-core processor with 4x Cortex‑A76 cores @ up to 2.2 GHz, 4x Cortex‑A55 core @ 1.8 GHz Arm Mali-G610 MP4 “Odin” GPU @ 1.0 GHz Video decoder – 8Kp60 H.265, VP9, AVS2, 8Kp30 H.264 AVC/MVC, 4Kp60 AV1, 1080p60 MPEG-2/-1, VC-1, VP8 Video encoder – 8Kp30 H.265/H.264 video encoder 6 TOPS NPU System Memory – 4GB, 8GB, 16GB, or […]

August 25, 2023January 9, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Youyeetoo YY3568 devkit review – Part 1: Unboxing, specifications, and Android 11 testing

Youyeetoo has sent us a review sample of their YY3568 “Bundle 5” devkit with the Rockchip RK3568-powered YY3568 SBC, an 11.6-inch touchscreen display, a MIPI camera module, and all accessories required to get started. We were especially interested in using it to play with the 1 TOPS NPU in the Rockchip RK3568 in Linux, but we’ll start the Youyeetoo YY3568 review with an unboxing, some specifications, and a quick review with Android 11 before switching to Debian 10 in the second part of the review. Youyeetoo YY3568 devkit unboxing The YY3568 single board computer itself is comprised of a carrier board and a YY3568-Core board with a Rockchip RK3568 processor, as well as 8GB RAM, 64GB eMMC flash, and WiFi 5 and Bluetooth 5.0 module. The board is suitable for various applications from generic computing to video playback and AI workloads. YY3568 SBC specifications and hardware overview Youyeetoo YY3568 board […]

August 18, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Rockchip RK3568 SBC takes up to four AHD cameras, two SATA drives

Boardcon EM3568-AV CAM SBC is powered by a Rockchip RK3568 SoC and comes with four AHD (analog high-definition) camera connectors and two SATA 3.0 ports to store video data on hard drives. The SBC is also equipped with up to 8GB RAM, up to 128GB eMMC flash, supports MIPI DSI, LVDS, and eDP displays, and features a video composite output, two Gigabit Ethernet ports, WIFi 4 connectivity, an optional 4G LTE module, a few USB ports, and several connectors for expansion. Boardcon EM3568-AV CAM specifications: SoC – Rockchip RK3568 CPU – Quad-core Cortex-A55 processor @ up to 2.0 GHz GPU – Arm Mali-G52 2EE GPU with support for OpenGL ES 1.1/2.0/3.2, OpenCL 2.0, Vulkan 1.1 AI accelerator – 1 TOPS NPU (probably rounded up from 0.8 TOPS) VPU – 4Kp60 H.265/H.264/VP9 video decoding, and 1080p60 H.265/H.264 video encoding System Memory – 2GB (up to 8GB) Storage 8GB eMMC flash (up […]

August 10, 2023 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Radxa ROCK 5B SBC goes fanless with metal case

The Radxa ROCK 5B was one of the first Rockchip RK3588 SBCs, and when we reviewed the developer edition of the board in July 2022 it came with an heatsink and 5V fan that was always on. That’s probably fine for testing, but many people will prefer a fanless solution. It turns out a metal case turning the ROCK 5B SBC into a fanless device has been available since the end of last year, but I’ve only come across it today. The black part is made of metal and the front and back plates are made of green plastic. As with all cases, there are always questions about compatibility with accessories, and for metal cases in particular, whether it’s actually used to cool the processor. Since it’s been around for many months, other users have already tested it out including Radxa forum’s user Deadmeat user who confirmed the SSD and […]

August 8, 2023August 8, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Banana Pi BPI-CM2 – A Raspberry Pi CM4-compatible Rockchip RK3568 SoM with extra I/Os

Banana Pi BPI-CM2 is another Raspberry Pi CM4-compatible system-on-module, this time based on a Rockchip RK3568 quad-core Cortex-A55 SoC and with a twist as besides the two 100-pin high-density connectors, the module adds two 70-pin high-density connectors for the extra I/Os provided by the Rockchip processor such as PCIe 3.0, USB 3.0, eDP, MIPI DSI, and an additional Gigabit Ethernet. The Rockchip RK3568 module comes with many of the same features and options as the Raspberry Pi CM4 with 2GB to 8GB RAM, 8GB to 256GB eMMC flash, optional WiFi 5 and Bluetooth 5.0 connectivity, and an on-module Ethernet transceiver, in this case, a Realtek RTL8211F. Banana Pi BPI-CM2 specifications: SoC – Rockchip RK3568 CPU – Quad-core Cortex-A55 processor @ up to 2.0 GHz GPU – Arm Mali-G52 2EE GPU with support for OpenGL ES 1.1/2.0/3.2, OpenCL 2.0, Vulkan 1.1 AI accelerator – 0.8 TOPS NPU VPU – 4Kp60 H.265/H.264/VP9 […]

August 7, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

DietPi News – v8.20 released, NanoPi Neo Air handheld Linux terminal

The latest DietPi v8.20 release of the lightweight Debian-based Linux distribution for SBCs and server systems was outed on July 29, 2023, and on a separate note, a DIY handheld Linux terminal based on the NanoPi Neo Air SBC and running DietPi has been found on the interwebs. DietPi v8.20 release The project team released the new DietPi v8.20 on July 29th, 2023 with the following highlights: Homebridge: New software package bringing Apple Homekit support Kernel updates for Pine64 Quartz64 – Linux 6.4.7 and enabled support for the NFS kernel server FriendlyELEC NanoPi R5S/R5C/R6S series – Linux 5.10.160 StarFive VisionFive 2 RISC-V SBC – Linux 5.15.123 WiFi Hotspot: Enhanced DHCP default settings Fixes and updates for DietPi-LogClear, DietPi-Dashboard, DietPi-LetsEncrypt, PaperMC, vaultwarden, etc… The full changelog can be found on the DietPi website and the source code is hosted on GitHub. NanoPi Neo Air handheld Linux terminal running DietPi While it’s […]