Rockchip RK33xx Category - Page 12 of 47 - CNX Software

November 19, 2020November 19, 2020 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Box86 is an x86 Emulator for Raspberry Pi and other 32-bit Arm platforms

Last week, we wrote about Raspberry Pi 4 Vulkan project status and future plans, and one person commented they are currently trying to get dxvk to work Box86, and that CNX Software should write about the latter. Cool, but what does that mean? dxvk is an open-source Vulkan-based implementation of D3D9, D3D10, and D3D11 for Linux, and Box86 is a Linux userspace x86 emulator that works on 32-bit Arm targets like the Raspberry Pi SBC. Nice, and I remember I ran x86 Linux and Windows on Raspberry Pi a few years ago using a closed-source commercial program called Exagear, but having an open-source solution is even better. That means 64-bit Arm is not supported at all, and Box86 can not even be built for Aarch64 targets. Since many x86 games require OpenGL, as opposed to OpenGL ES, Box86 works best in conjunction with gl4es. By installing Box86 on Raspberry Pi […]

November 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Rock Pi 4B or Raspberry Pi 4 based mini PC runs RISC OS Cloverleaf (Crowdfunding)

First released in 1987 by Acorn Computer Ltd, RISC OS was the first operating system designed to run on ARM processors, and specifically on the company’s Archimedes personal computer. I don’t think I had ever heard about the operating systems until it was ported to the Raspberry Pi SBC by RISC OS Open Ltd (aka ROOL) who manage the publication of RISC OS source code. But there’s also a separate project called RISC OS Cloverleaf which aims to further develop the open-source operating systems, and just launched a Kickstarter campaign to fund software development, and they also offer two mini PCs running RISC OS Cloverleaf with namely Cloverleaf Puma powered by a Rock Pi 4B SBC, and Cloverleaf Kitten featuring a Raspberry Pi 4 board. Cloverleaf Puma / Kitten key features and specifications: SBC Cloverleaf Kitten – Raspberry Pi 4 with Broadcom BCM2711 SoC, 4GB DDR4 RAM Cloverleaf Puma – […]

November 12, 2020November 12, 2020 by Jean-Luc Aufranc (CNXSoft) - 35 Comments

NanoPi R4S headless RK3399 SBC features up to 4GB RAM, dual Gigabit Ethernet, USB 3.0 ports

We’ve seen several tiny ultra-cheap boards for headless applications over the last few years with products Orange Pi Zero Plus or NanoPi R2S which are usually based on 32-bit Cortex-A7 or low power 64-bit Cortex-A53 processors, coupled with up to 512MB to 2GB, and may have some limitations when it comes to Gigabit Ethernet and USB 3.0 speeds. If you’d like something similar but more powerful, FriendlyELEC is working on NanoPi R4S headless SBC powered by a Rockchip RK3399 hexa-core Cortex-A72/A53 processor with up to 4GB RAM, dual Gigabit Ethernet, and two USB 3.0 ports. NanoPi R4S preliminary specifications: SoC – Rockchip RK3399 hexa-core processor with dual-Core Cortex-A72 up to 2.0GHz, quad-core Cortex-A53 up to 1.5GHz, Mali-T864 GPU with OpenGL ES1.1/2.0/3.0/3.1, OpenCL, DX11, and AFBC support, 4K VP9 and 4K 10-bit H265/H264 60fps video decoder System Memory – 1GB DDR3 or 4GB LPDDR4 Storage – MicroSD card slot Networking – […]

November 11, 2020 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Giveaway Week 2020 winners announced

CNX Software’s “Giveaway week 2020” took place last week with 7 different prizes including three MINIX accessories (USB-C hubs and USD PD charger), M5Stack Atom Echo ESP32 based programmable speaker, Miniware DT71 smart tweezers, and two SBC’s namely RockPi 4C and Ryzen Embedded based DFI GHF51. All people had to enter was to leave a comment with the country to which the parcel would have to be sent. With the help of random.org, we now have selected and confirmed winners which all happen to come from the US or Europe this time around: MINIX NEO Storage Plus USB-C Hub with 480GB SSD – Marc, USA Miniware DT71 Smart Tweezers – xdcc_master, GERMANY MINIX NEO C-G USB-C Multiport Adapter – Barnaby, UK RockPi 4C SBC – Garrett, USA M5Stack Atom Echo ESP32 Speaker – Venet, ITALY MINIX NEO P2 100W USB-C Charger – Michal, SLOVAKIA DFI GHF51 Ryzen Embedded SBC – […]

November 6, 2020November 8, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Kontron unveils RK3399K(Pro) SMARC 2.1 Module with up to 8GB RAM

Embedded systems companies tend to use processors from established firms like NXP Semiconductors or Texas Instruments, we’ve seen few systems-on-module based on processors from Amlogic, Rockchip, or Allwinner which are popular on this blog due to their value proposition. One of the reasons was/is software support, but this has improved over the years, and the other is the lack of wide temperature range parts plus potential concerns about long term supplies. I’m not aware of any industrial/extended temperature range part from Amlogic, but Allwinner provides A40i/A60i industrial temperature range processors, and Rockchip RK3399K supports an extended commercial temperature range between -20 to +85°C. Kontron selected the latter for their first-ever Rockchip powered system-on-module: the SMARC-fA3399 SMARC 2.1 module. SMARC-fA3399 SoM specifications: SoC – Rockchip RK3399K hexa-core processor with two Cortex A72 cores @ 1.8/2.0 GHz (wide temp vs commercial temp), four Cortex-A53 cores @ 1.4/1.6 GHz, Arm Mali-T860MP4 GPU System […]

November 5, 2020November 7, 2020 by Jean-Luc Aufranc (CNXSoft) - 321 Comments

Giveaway Week – RockPi 4C SBC

The first, but not last, SBC of Giveaway Week 2020 is RockPi 4C single board computer equipped with a Rockchip RK3399 processor coupled with 4GB RAM, and featuring HDMI and DisplayPort for dual 4K monitor setups, as well as Gigabit Ethernet, WiFI 5, Bluetooth, USB 3.0/2.0 ports, etc… The board closely follows Raspberry Pi 4 form factor, so without thinking too much about it I thought I could just use it with CrowPi2 Raspberry Pi 4 laptop. However due to small mechanical differences, and a different position of the processor impacting cooling, I quickly realized this would not work. Since I did not have time to review yet another RK3399 SBC, I thought I might as well as give it away, as I’m sure somebody will find a good use for it. Note the board does not come with any accessories, so you’ll have to get a MicroSD card, USB-C […]

November 1, 2020November 1, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Novasom M9 RK3399(K) SBC offers DSI, eDP and HDMI display interfaces, M.2 SSD storage

We’ve previously seen compact Rockchip RK3399 powered single board computer with support for dual displays with the likes of Rock Pi 4 and NanoPi M4B thanks to HDMI and MIPI DSI interfaces. Novasom M9 is another compact RK3399 SBC with both HDMI and MIPI DSI, as well as DisplayPort or embedded DisplayPort (eDP) for a wider choice of display interfaces, although as I understand it is still limited to dual independent display configurations. Another differentiating feature is the option for a wider -20 to +85°C operating temperature meaning it can be equipped with Rockchip RK3399K processor instead of RK3399, and the board also happens to come with an M.2 socket for NVMe SSDs just like Rock Pi 4 board. SBC-M9 board specifications: SoC – Rockchip RK3399 or RK3399K hexa-core processor with two Cortex A72 cores, four Cortex-A53 core, Arm Mali-T860MP4 GPU System Memory – LPDDR3 up to 4GB @ 64bit […]

October 30, 2020 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Station P1 & M1 fanless mini PCs run media or desktop-optimized Android OS

Firefly Station OS Multimedia & Desktop Modes

T-Chip has recently introduced two fanless “Geek” mini PCs under their Firefly brand with Station P1 & M1 respectively powered by Rockchip RK3399 hexa-core processor, and RK3328 quad-core processor. Both mini PCs can run Firefly’s Station OS in either desktop or media mode, as well as Android or Ubuntu. There are also some community efforts to port Armbian and LibreELEC to the devices. Station P1 specifications Specifications: SoC – Rockchip RK3399 hexa-core processor with two Cortex A72 cores @ up to 1.8 GHz and four Cortex-A53 cores, Mali-T860 MP4 GPU with support for OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, VPU with support for 4K H.265 10-bit 60fps video decoding, multi-channel 1080p video decoding and encoding System Memory – 4GB LPDDR4 dual-channel 64-bit RAM Storage – 32GB eMMC flash (16GB/64GB/128GB Optional), onboard 16MB SPI flash, MicroSD card slot Video Output HDMI 2.0a up to 4Kp60, HDCP 1.4/2.2 DisplayPort 1.2 up to 4Kp60 […]