Processors Category - Page 742 of 1183 - CNX Software

April 18, 2017April 19, 2017 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

GIGABYTE GA-J3455N-D3H Apollo Lake Mini-ITX Motherboard Comes with 2x Gigabit Ethernet Interfaces, 4x SATA Ports

GIGABYTE has introduced an update to Bay Trail based GA-J1900-D3V and Braswell based GA-N3150N-D3V motherboards with the launch of GIGABYTE GA-J3455N-D3H mini-ITX motherboard powered by an Intel Celeron J3455 Apollo Lake processor, and equipped with two Gigabit Ethernet ports, four SATA interfaces, and support for up to 16GB RAM. GA-J3455N-D3H specifications: SoC – Intel Celeron J3455 quad core processor @ 1.50 / 2.3 GHz with 12EU Intel HD Graphics 500, 2 MB Cache; 10W TDP System Memory – 2x DDR3L SO-DIMM sockets supporting up to 16 GB RAM; Dual channel; DDR3L 1866/1600/1333 MHz non-ECC memory modules supported Storage 2x SATA 6Gb/s connectors (SATA3 0 & 1) via SoC, 2x SATA 6Gb/s connectors (SATA3 2 & 3) via ASMedia ASM1061 chip 1x 64 Mbit flash for licensed AMI UEFI BIOS with PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Video Output 1x D-Sub port (VGA) supporting a maximum […]

April 18, 2017September 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 43 Comments

RDA Micro RDA8810 Android SDK with Linux & U-boot Source Code for Orange Pi 2G IoT Board Released

Orange Pi 2G IoT board was released a couple of weeks ago, shortly followed by Android and Ubuntu images, but since it was not based on Allwinner, but an RDA Micro 8810PL processor, we did not have any source code so far, which can be a real problem for a development board… Shenzhen Xunlong has now managed to upload a 6.7GB Android SDK to MEGA, with the link published via Orange Pi Resources page. MEGA has a download limit which depends on how much traffic they get at the time, and after 5.3 GB download, I was asked to register for a PRO account, or wait for four hours before resuming the download. If you want to avoid this limit for any large MEGA download, you can run megadl instead. That’s what I did in Ubuntu 16.04 (remember to escape any special characters with \):

sudo apt install megatools
megadl https://mega.nz/#F\!59EVmKAZ\!5FdBb2dQIMcxgY2h16nGPg

1 2	sudo apt install megatools megadl https://mega.nz/#F\!59EVmKAZ\!5FdBb2dQIMcxgY2h16nGPg

Once the download is […]

April 17, 2017April 17, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

PocketBone Board Based on Octavo Systems OSD3358 SiP Fits into an “Altoids Smalls” Mint Tin Box

Last year, Octavo Systems introduced OSD3358 System-in-Package (SiP) that includes Texas Instruments Sitara AM3358 processor, 256MB to 1GB RAM, a PMIC and an LDO into a single package. Since then the SiP has been found in BeagleBone Black Wireless and BeagleBone Blue, and at the time of launch there was also some development around PocketBone, a tiny open source hardware Smalls mint tin sized board based on OSD3358, which is smaller than a CHIP board, but a little bigger than NanoPi NEO board. There’s now been some progress with prototypes of the board manufactured with the following specifications: SiP (System-in-Package) – Octavo Systems OSD3358 with TI Sitara AM3358 ARM Cortex-A8 processor @ up to 1 GHz, PowerVR SGX530 GPU, PMIC + LDO, and 512MB DDR3 Storage – micro SD slot USB – 2x micro USB port one for power, one OTG port Expansion – 10-pin header (unpopulated) with SPI, I2C, […]

April 17, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Bben to Launch an Apollo Lake HDMI TV Stick Powered by Intel Celeron N3450 Processor

Intel is planning to launch “Michigan City” Apollo Lake Compute Sticks sometimes with year, but Bben, after launching MN17A Apollo Lake mini PC, may be able to launch their own Celeron N3450 TV stick before Intel does, as Netbook Italia reports the company showcased such product at the Hong Kong Global Sources Electronics Fair. Bben Micro computer specifications: SoC – Intel Celeron N3450 quad core processor @ 1.1 GHz / 2.2 GHz, 12 EU Intel HD graphics 500 @ 200 MHz / 700 MHz; 6W TDP System Memory – 2 to 4GB DDR3 Storage – 32 or 64 GB eMMC flash + micro SD slot Video Output – HDMI port (likely limited to 1.4 version with 4K @ 30 Hz max resolution/framerate) Audio – HDMI + 3.5mm audio jack Connectivity – Dual band 802.11 b/g/n/ac WiFi, and Bluetooth 4.2 USB – 2x USB 3.0 ports Misc – Fan and ventilation […]

April 16, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Wandboard QuadPLUS Development Board Gets i.MX 6QuadPlus Processor, 802.11ac WiFi and Bluetooth 4.1

The first Wandboard development boards launched in 2012 nearly 5 years ago based on Freescale i.MX6 Solo and Dual processor, with Wandboard Quad launched a few months later. The boards were fairly popular at the time due to their better specifications, and especially Freescale’s much better documentation and software compared to the competition such as Broadcom (Raspberry Pi) and Allwinner (Cubieboard). Since the boards are based on TechNexion EDM system-on-modules they could also be used by companies working on their own products based on the system-on-module. It’s also a good platform if you want to test various version of Android, because the company released Jelly Bean, Kitkat, Lollipop, and Marshmallow images for the boards, and I’m expecting a Lollipop version soon. However, albeit the company worked on other NXP boards such as PICO-IM6UL Android Things, there had not been any hardware upgrade for Wandboard for nearly 4 years, but last […]

April 14, 2017February 16, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

MatchX LoRaWAN Solution Supports up to 65,535 Sensor Nodes per Gateway

MatchX is a startup with offices in Chicago, Shenzhen, and Berlin, that provides a complete LoRaWAN solution with their MatchBox gateway based on SX1301 concentrator and Mediatek MT7628N processor, as well as MatchStick, MatchModule, and MatchCore sensors with up to 65,535 of those connecting to a single gateway. MatchBox LoRaWAN/WiFi/GPRS/GPS Gateway MatchBox specifications: Processor – Mediatek MT7628AN MIPS WiSoC @ up to 580 MHz System Memory – 128MB DDR2 RAM Storage – 16MB FLASH Connectivity LoRa – Semtech SX1301 + 2x SX1257@+27dbm Output Power; 470/868/915Mhz frequency range, -146dBm sensitivity 10/100M Ethernet 802.11n 2×2 WiFi @ 300 MHz Optional GPRS via SIM800H, 85.6 kbps (downlink/uplink) + micro SIM card slot GPS via UBlox Max 7C Antennas – 2x u.FL antennas for WiFi, u.FL or chip antenna for LoRa, GPS and GPRS modules USB – 1x USB 2.0 port, 1x USB type C exposing 4 or 6 GPIOs and UART Misc – […]

April 14, 2017April 14, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Geniatech ATV329 is a 3G & 4G LTE Android TV Box Powered by Amlogic S905 Processor

In many countries, people get broadband Internet via ADSL or “fiber to the home”, but in some regions, notably the Middle East and Africa, there may not be such option, and people instead rely on cellular networks like 4G LTE for their Internet access. I’ve already covered SDMC TV boxes with a 4G LTE connectivity, but there’s now one more option thanks to Geniatech ATV329 Android TV box powered by Amlogic S905 processor, and including a 4G LTE modem & a SIM card slot. Geniatech Enjoy TV Nano ATV329 specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 1.5 GHz with a penta-core Mali-450MP GPU System Memory – 1GB DDR3 Storage – 8GB eMMC flash, SD card slot Video & Audio Output – HDMI 2.0 port Connectivity Ethernet 802.11 b/g/n Wi-Fi + Bluetooth 4.0 (AP6212) with one external antenna GSM, 3G, and 4G connectivity with one external […]

April 13, 2017September 19, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Particle Asset Tracker Kit v2 2G/3G GPS Location Tracker Supports Grove Modules

Particle, the maker of IoT boards such as Electron 2G/3G module, has launched it second Asset Tracker Kit – based on Electron – with a smaller case, improved GPS performance, satellite support for GPS, GLONASS, Galileo & BeiDou, and compatibility with Seeed Studio Grove modules. Asset Tracker Kit v2 hardware specifications: MCU – STMciro STM32F205 ARM Cortex M3 micro-controller @ @ 120 MHz with 1MB Flash, 128K RAM Cellular Connectivity – U-Blox SARA U-series (3G) or G-series (2G) modem + NanoSIM card slot + u.FL connector for Antenna Location 72-channel u-bloxM8 engine with support for GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1I, Galileo E1B/C, SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN Update rates: Single GNSS: up to 18 Hz, 2 Concurrent GNSS: up to 10 Hz Position accuracy of 2.5 m, sensitivity of -167 dBm Acquisition times: Cold starts: 26s, Aided starts: 2s, Reacquisition: 1s On board ceramic GPS antenna […]