Category: Processors

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Rikomagic To Sell an AllWinner A10 Android & Ubuntu Netbook

Rikomagic To Sell an AllWinner A10 Android & Ubuntu Netbook

Rikomagic, the company that sells the MK802 mini PC, is planning to sell a netbook based on AllWinner A10 processor that runs both Android and Ubuntu operating systems. This device looks very much like the H6 netbook  with a 10″ 1024×600 display, 1 GB RAM, 4 to 8 GB flash. an SD card slot, 3 USD ports, audio in/out and a front camera. Android currently runs in the internal flash, and Ubuntu can be booted from an SD card. In the video below, Andy Kirby of Rikomagic gives an overview of the netbook and shows a demo of Ubuntu Desktop running from an SD card. The Linux OS seems to run relatively smoothly as he shows pages rendered in Chromium.However, hardware acceleration (both OpenGL and VE) is missing, and Youtube video playback is very slow as it is rendering in software. Open Office is also a bit slow, but it’s […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on HardKernel ODroid-X Review with Android 4.0.4

HardKernel ODroid-X Review with Android 4.0.4

Following my ODroid-X unboxing and first boot post, I planned to review ODroid-X board with both Android and Ubuntu. However, I found out that an Ubuntu image will only be released later this week, so I’ll focus on Android review for today, and try Ubuntu once it becomes available. The default firmware come with a few standards applications, and an ODROID app that: Provide links to developer resources Features a file explorer Has a WiFi section that show WiFi information such as signal strength and let you test the network performance Has a GPS section (useless for this board) Has a Sensor section, but there are none in ODROID-X. Has a camera section that let you show the camera input. It works with the module provided Has a others section with 3D compass test (not used for ODROID-X) The Dev Tools application is also installed. But there was not really […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on ARM Announces 3 New Midgard GPUs – Mali-T624, Mali-T628 and Mali-T678

ARM Announces 3 New Midgard GPUs – Mali-T624, Mali-T628 and Mali-T678

ARM announced the second generation of the Mali-T600 Series GPUs targeting tablets, smartphones and smart TVs. Those new GPUs provide up to 50% performance increase over the first generation Midgard GPUs (T-604 & T-658) and include  support for Adaptive Scalable Texture Compression (ASTC), a texture compression technique. The company explains that ASTC significantly optimizes GPU performance and increases battery life in devices. Those 3 new GPUs based on Mali Midgard architecture are named as follows: Mali-T624 – 1 to 4 cores – Market: Smartphones and smart-Tvs Mali-T628 – 5 to 8 cores – Market: Smartphones and smart-Tvs Mali-T678 – Up to 8 cores, 4x the GPU compute performance of Mali-T628 – Market: Tablets As with previous Midgard GPUs, the new GPUs support GPU compute with improves performance and energy-efficiency for math intensive activities, such as: Computational photography – computational methods of enhancing or extending digital photography Multi perspective views – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Zero Devices Z902 mini PC Can Now Be Pre-ordered for $75

Zero Devices Z902 mini PC Can Now Be Pre-ordered for $75

Zero Devices Z902 is an upgrade of Zero Device Z802 (virtually identical to MK802) mini PC powered by AllWinner A10, with 1 GB RAM, a total of 3 USB ports (1 USB Host and 2 mini USB ports) and an HDMI male connector. The device will eventually sells for $89, but the company currently offers the 500 first pieces for pre-order for $75 US including shipping via Asiapads. The company expects the first batch to be shipped by the end of August (25th to 31st). The package includes a micro USB to USB (male) cable, a microUSB to USB (female) adapter, an HDMI female to male cable for those who can’t or don’t like connect the device directly in the TV, and a mini CD with a user manual in English. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 22 Comments on HardKernel ODroid-X Development Board Unboxing and First Boot to Android

HardKernel ODroid-X Development Board Unboxing and First Boot to Android

I’ve just received the ODroid-X development board based on Samsung Exynos 4412 quad-core processor together with lots of accessories: WiFi-Modules Kit USB-UART Module Kit 16 GB eMMC Module 5V/2A Adaptor 10.1″ LCD Module (1366×768) BlueTooth Dongle Camera Module HDMI Cable Since there is quite a lot of things to cover, today I’ll just show some unboxing pictures, how to connect all those modules to the board and run Android pre-loaded in the eMMC module, and I’ll do a more detailed review with Android and Ubuntu in another post. I received the kit in a large box sent via EMS. Here’s a picture with  the board and all accessories present in the Box. From top left to bottom right: 10.1″ LCD Modules, ODroid-X development board, HDMI to mini HDMI cable, micro USB to USB cable (for debugging), 5V/2A power supply for the board, 9V/1.5A power supply for the LCD module, WiFi […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on HackBerry AllWinner A10 Board is Now Available for $60

HackBerry AllWinner A10 Board is Now Available for $60

The Hackberry “development board” is now available for sale on Miniand. This board powered by AllWinner A10 processor comes in 2 versions: 512 MB RAM version – Available now for $60 1GB RAM version – Available by the end of the month for $65. Both boards features a 4GB Flash, a SDHC slot, 2x USB 2.0 port, 10/100 Ethernet, Wi-Fi, HDMI & composite outputs,  headphone & microphone ports and a IR sensor. The good thing is that serial interface and FEL connectors will be soldered on the board for easy debugging and recovery. The FEL recovery port allows to reflash the board using Livesuit. As a side note, Henrik, a developer involved in Allwinner A10 software development, has done some work to reverse engineer FEL USB protocol, wrote a small program to enter into Livesuit mode with an SD card (Go to the bottom of the page section “Forcing FEL […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 16 Comments on AllWinner A10 Initramfs Support and Linaro 12.07 Image

AllWinner A10 Initramfs Support and Linaro 12.07 Image

An initramfs is a minimal root filesystem that is loaded at an early stage of the boot process, before the rootfs partition is mounted. This is optional but is now used by many Linux distributions such as Ubuntu in order to speed up boot time among others things. Up to recently, there was no support for this in the AllWinner A10 nightly builds, and there would be lot of error messages due to ureadahead process with Ubuntu, but I’ve changed that by: Using a boot.scr file (U-Boot Script) for each supported device in order to either follow the default init boot method or do an initramfs boot if uInitrd file is present in the FAT partition. Adding a script (a1x-initramfs.sh) to generate and install uInitrd initramfs in the rootfs. The initramfs can’t be generated at build time since the hardware packs are (mostly) distribution agnostic. If you want an initramfs, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on $39 Variscite VAR-SOM-AM33 SoM Powered by TI Sitara AM335x

$39 Variscite VAR-SOM-AM33 SoM Powered by TI Sitara AM335x

Variscite has announced a new system-on-module based on Texas Instruments Sitara Cortex A8 AM335x processors (AM3352 or AM3354) named VAR-SOM-AM33, which sells for as little as $39 US (in large quantities I assume). This SoM is available in commercial and industrial grades, and the company expects the module to be used in applications such as automotive, control systems, lighting, refining and processing. Here are the specs of this module: CPU – Texas Instruments AM335x Processor @ up to 720 MHz withPowerVR SGX530 GPU (AM3354 only) System Memory – 256MB 606MHz DDR3 Storage – 128 to 512MB SLC NAND Flash Display interface – LCD interface – Parallel RGB Supporting 1400×1050 24bit and4/5/8-Wire touch panel interface Audio – Line-in, line-out, stereo headphone out, digital microphone, analog microphone and S/PDIF Out Connectivity: 10/100Mbps Ethernet PHY 10/100/1000Mbps RGMII Wi-Fi 802.11 b/g/n (via TI WiLink 6.0) Bluetooth V4.0 + EDR (via TI WiLink 6.0) Interfaces: 2 […]

Youyeetoo X1 x86 SBC