Last week, I found out that AMLogic released the kernel source code for AML8726-MX, its dual core Cortex A9 processor, but this code is only for the “common” platform, and some source code specific to tablets or media players is missing (e.g. some drivers). But today, Ainol released the source code for the Ainol Novo 7 Elf II and Aurora II tablet, both of which are based on on AML8726-M6 dual core processor: Ainol Novo 7 Elf II Source Code (2 GB) – http://dl.vmall.com/c0yqzpadah Ainol Novo 7 Aurora II source code (2 GB) – http://dl.vmall.com/c0imlixp7d The files are pretty big, and the download very slow on my side (“1 day, 16 hours remaining”), so I’ll probably have to give up. I assume “fards” will import the source code into a new repo in his github account. Anyway, this potentially makes AMLogic AML8726-MX a very interesting development platform, although we’ll have to […]
QuickEmbed UPuter Pi – $69 AllWinner A10 Development Board
I’ve been informed of a new AllWinner A10 development board which is marketed as some sort of Raspberry Pi “clone”, although the hardware is different. The UPuter Pi is a small board designed by QuickEmbed Technology, a Shanghai based company, that features AllWinner A10 processor @ 1.5 GHz, 512 to 1 GB RAM, and 4 to 8 GB Flash. Here are the specs as mentioned on the company website: CPU 1.5GHz ARM Cortex-A8 multi-core Mali400 graphic engine Memory 512M/1GB DDR3 Flash 4G/8G DC 5V USB power working temperature -10 to 70C storage temperature -20 to 80C Android 4.0 WIFI/RJ45 network USB/Wireless keyboard/mouse 3G usb card TF card, U-disk, usb harddisk 720P/1080P/2160P I must have gone blind because I don’t see any RJ45 connector (for Ethernet). The board will support Android 4.0 and all the usual Linux distros supported by Allwinner A10 processor. QuickEmbed may have pushed the clone concept a […]
Timesys Unveils LinuxLink BSP/SDK for MityARM-3359 SoM (TI AM335x)
Critical Link is an electronics product development company that provides “MityDSP” and “MityARM” System on Modules and Timesys is a software company working on Embedded Linux, which provides LinuxLink, a software development framework for embedded Linux application development. Both companies have partnered to offers LinuxLink BSP/SDK for MityARM-3359 SoM based on Texas Instruments Sitara AM335x Cortex A9 processor. LinuxLink (for MityARM-335x) comes in 2 versions: A free version which includes: A wizard-based interface that simplifies the selection of a Linux kernel, software packages and tools Kernel, toolchain and debugger Access to hundreds of open-source software packages Support by Timesys for build/boot issues. A PRO version (Starts at $5495 per developer) which includes extra “features” such as: TimeStorm IDE – A desktop-based development environment Tools for advanced customization and integration unmetered support Everything is built on Timesys servers, but the web interface makes it quite customizable and offers lots of options […]
Archos Unveils 101 XS Tablet Powered by TI OMAP4470
After teasing us last March, Archos officially launched their new Gen10 XS tablet line, and specifically announced the Archos 101 XS, a 10.1-inch Android 4.0.3 tablet powered by Texas Instruments OMAP4470 (Dual core Cortex A9) @ 1.5 GHz that features a detachable magnetic keyboard called the CoverBoard which also serves as a protective cover when not in use. Here are the specs for this new tablet: Processor Texas Instruments OMAP4470 @ 1.5GHz with SGX544 GPU Storage 16 GB Flash Memory + microSD Slot (up to 128GB) System Memory 1GB RAM Video codecs and containers • H.264 HD ([email protected], up to 1080p@30 fps and 1080i/720p@60 fps) • MPEG-42 HD (SP/ASP@L6, up to 1080p@30 fps) • With optional plug-in: MPEG2 HD (MP/HL, 1080p@30 fps) • With the above codecs, the device can play video files with the following extensions: AVI, MP4, MOV, 3GP, MPG, PS, TS, VOB, MKV, FLV, RM, RMVB, ASF […]
How to Create a Custom Android Firmware for CX-01 mini PC
I’ve written a post about updating the firmware on CX-01 mini PC last week. But, this week I’ve been able to go further since I’ve learned some tools available for Telechips TCC8902/TCC8903 firmware files are also compatible with TCC892X firmware files, and it’s possible to extract the firmware, modify/add files in different partitions and repack all this to burn it with FWDN tool. I’ll explain the different steps in this post, and even if you don’t own CX-01 it could be interesting as some of the commands are common to all Android devices. But first: BIG FAT WARNING!!! Although I believe the steps mentioned in this post are safe, and errors can be recovered by using the CX-01 firmware, CX-01 mini PC is not unbrickable, and if I’m wrong your device will become useless and you won’t be able to fix it. I may also mention some tools (but not show […]
IP878 Android TV Box – $40 AllWinner A10 mini PC?
I’ve been tipped off about a new Android mini PC called IP878 selling for less than $40 on a site called ahappydeal.com. This HDMI Stick is said to run Android 2.3, features an ARM CPU, 512 MB RAM and 4 GB flash and comes with a basic remote control. There’s no mention of the exact processor on the website mentioned above, but I found what looks like the (a?) manufacturer website (NewMi), which describes IP878 features as follows: SoC – ALLWINNER TECH A10S RAM – 512MB DDR2 Storage – 2GB Flash + microSD card slot Video and Audio out – HDMI (high-resolution video output up to 720P ???) Video Containers – *.mkv,*.wmv,*.mpg, *.mpeg, *.dat, *.avi, *.mov, *.mp4 *.wmv, *.FLV, *.3GP Video Codecs – H.264, H.263,VP8,RV8/9,MPEG4,Xvid,Divx 3/4/5,MPEG1/2 USB – USB 2.0 Host & OTG Wi-Fi – 802.11 b/g Power – 5V/1A Remote control – IR extender Weight – 25 g Dimensions […]
SYSGO Releases ELinOS 5.2 Industrial Grade Linux
SYSGO, a software company for the real-time and embedded markets, has announced the release of ELinOS 5.2, an Industrial Grade Linux distribution, updated to kernel 3.2 and with new features related to scheduling, memory management, file systems, networking and security. The new 5.2 version brings the following improvements: Integration of new kernel 3.2 to support new features and availability of previous versions of kernels 2.6.33 and 2.6.34, to respond to customers demand. Real-time extension based on Open Source Automation Development Lab (OSADL) implementation (PREEMPT RT) especially designed and tested for industrial needs. Support for latest embedded CPUs including Intel, Freescale QorIQ, ARM Cortex, TI OMAP 4, Freescale i.MX6 and MIPS. SMP (Symmetric multiprocessing) support on all multi-core platforms. QEMU simulator supported for all architectures. New functionality support in areas of graphics (i.e. AMD Llano Fusion APUs), Wi-Fi (i.e. Intel iwlwifi 105 and 135), SATA (i.e. Intel C600 serial-attached-scsi controller), USB […]
XBMC for Android With Hardware Video Decoding on Telechips TCC8925 Processor
Taehyun Kim, a developer working for Inisoft (Korea), has been working on video hardware acceleration on Diceplayer for Telechips TCC8925 processor (The one used in CX-01 and Zero Devices Z900) and call this player from XBMC. He has uploaded a video to demo his progress and that’s pretty impressive. You can try it yourself by downloading and installing the following apps: xbmckor-armeabi-v7a-20120821.apk (Korean version). [Update: Kim has also uploaded the English version]. Diceplayer – Free app via Google Play You’ll also need to create a file called playercorefactory.xml in /sdcard/Android/data/org.xbmc.xbmc/files/.xbmc/userdata directory with the following content: <playercorefactory> <players> <player name=”MPC-HC” type=”ExternalPlayer” audio=”false” video=”true”> <filename>com.inisoft.mediaplayer.a</filename> <hidexbmc>true</hidexbmc> </player> </players> <rules action=”prepend”> <rule video=”true” player=”MPC-HC”/> </rules> </playercorefactory> I’ve tried it in Zero Devices Z900. The default language is Korean, but you should manage if you’re familiar with XBMC interface. When you play videos, you lose the usual XBMC interface, as those are played in […]