Processors Category - Page 1067 of 1129 - CNX Software

September 6, 2012 by Jean-Luc Aufranc (CNXSoft) - 56 Comments

Dual Droid TV Stick based on Rockchip RK3066 with 2GB RAM & 16GB Flash

Lately, there seems to have been a fair amount of interest for a Rockchip RK3066 mini PC (aka UG802) running Android 4.0, and the first mini PC to feature a dual core processor. I’m often reading people complaining about the lack of RAM on those devices, and some others would rather run most things from flash than an SD card for performance reason. But you might be able to get a more powerful mini PC soon, as deadhp1, a reader of this blog would left lots of feedback about Ug802, have been talking with manufacturer to design an HDMI TV stick based on UG802 platform, but with 2 GB RAM and 16 GB Flash, and the processor would be clocked at 1.6GHz instead of 1.2 GHz. The device is called “Dual Droid TV Stick” with the slogan: “Two brains are better than one”. The specifications would be as follows: OS […]

August 31, 2012May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

$49 Cubieboard: AllWinner A10 Open Hardware Development Board

The Cubieboard is a development board for the AllWinner A10 Cortex A8 processor. Contrary to some other AllWinner A10 “development board” that are simply based on a tablet or mini PC PCB, the cubieboard has been designed specifically as a development platform and provides access to I/O pins. Here are the specs of this development board: SoC – AllWinner A10 1GHz ARM cortex-A8 processor with Mali400 GPU System RAM – 1GB DDR3 @400MHz Storage – 2 MMC slot Video Output – HDMI 1080p Connectivity – 10/100M Ethernet USB – 2 USB Host, 1 USB OTG 1 IR sensor 96 expansion pins including i2c, spi, lvds, sata… Wi-Fi and Bluetooth can be supported via external USB dongle(s). The prototype above is the first revision of the hardware, and final hardware may look different. Some connectors (e.g. SATA) are not soldered in the picture above. The cubieboard is expected to be an […]

August 31, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linaro 12.08 Release with Kernel 3.6 and Android 4.1.1 Jelly Bean

Linaro release 12.08 includes Linux Kernel 3.6-rc2 and is the very first release with Android Jelly Bean (4.1.1-R4). The Android platform team has managed to port Android Jelly Bean to all their main development platforms: Versatile Express, Versatile Express RTSM, Samsung Origen, TI PandaBoard, ST Ericsson Snowball, as well as Samsung Galaxy Nexus smartphone. They’ve also added TINY_ANDROID, a minimal Android build that can be used for kernel development, toolchain work and other development where users only need a console. It’s possible to get the source code, build it and access the shell within 10 minutes. U-boot-Linaro has been updated and is now based on the latest upstream release v2012.07. Next month, we might be able to see a preliminary port of Android on 64-bit platform (ARMv8). Here are the highlights of the release: Android Automated Methanol (http://gitorious.org/methanol) browser benchmarking in Linaro Android. Automated over 100 Jelly Bean AOSP tests. […]

August 30, 2012August 30, 2012 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Samsung Unveils EK-GC100 Galaxy Camera Running Android 4.1

Following Nikon steps with its Coolpix S800c, Samsung announced their own Android camera. Samsung EK-GC100 camera features an Exynos 4412 quad core Cortex A9 processor, a 4.8″ touchscreen display (1280×720), Wi-Fi and 3G or 4G connectivity (depending on model), a 16MP camera with a 21X optical zoom, and runs Android Jelly Bean. Samsung Galaxy Camera specifications: OS – Android 4.1 (Jelly Bean) Processor – 1.4GHz Quad-Core processor Memory – 8GB ＋ memory slot : micro SDSC, micro SDHC, micro SDXC Display – 121.2 mm (4.8″), 308 ppi, HD Super Clear Touch Display Image Sensor – 16.3 effective megapixel 1/2.3″ BSI CMOS Lens – F2.8, 23 mm, 21x super long zoom IS – OIS (cnxsoft: what is that?) (Optical Image Stabilization) – See Ganesh comment below for details explanation, in case you don’t know this. ISO – Auto, 100, 200, 400, 800, 1600, 3200 Network – 4G, 3G (HSPA＋ 21Mbps): 850 […]

August 30, 2012May 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Rowboat Releases Android 4.1.1 Jelly Bean for Beagleboard-XM and Beaglebone

Rowboat announced a preliminary version of Android 4.1.1 (Jean Bean) for beagleboard and beaglebone platforms last week. These releases support SGX (3D graphics acceleration) on both Texas Instruments Sitara AM37x processor (Beagleboard-XM) and AM335x processor (Beaglebone), and all download and build instructions are available on their Wiki: Jellybean On Beagleboard JellybeanOn Beaglebone – Tested with LCD7 cape. If you could not care less about building it yourself, Rowboat provides pre-built binaries that you can install on a micro-SD card (4GB and greater) as follows : For Beagleboard-XM (DVI output):

curl http://rowboat.googlecode.com/files/beagleboard-xm-jb.tar.gz &gt; beagleboard-xm-jb.tar.gz
tar -zxvf beagleboard-xm-jb.tar.gz
cd ~/beagleboard_xm-jb
sudo ./mkmmc-android.sh &lt;Your SD card device e.g:/dev/sdc&gt;

curl http://rowboat.googlecode.com/files/beagleboard-xm-jb.tar.gz > beagleboard-xm-jb.tar.gz

tar -zxvf beagleboard-xm-jb.tar.gz

cd ~/beagleboard_xm-jb

sudo ./mkmmc-android.sh <Your SD card device e.g:/dev/sdc>

For Beaglebone (with 7″ LCD Cape):

curl http://rowboat.googlecode.com/files/beaglebone-jb.tar.gz &gt; beaglebone-jb.tar.gz
tar -zxvf beaglebone-jb.tar.gz
cd ~/beaglebone-jb
sudo ./mkmmc-android.sh &lt;Your SD card device e.g:/dev/sdc&gt;

curl http://rowboat.googlecode.com/files/beaglebone-jb.tar.gz > beaglebone-jb.tar.gz

tar -zxvf beaglebone-jb.tar.gz

cd ~/beaglebone-jb

sudo ./mkmmc-android.sh <Your SD card device e.g:/dev/sdc>

The full source is available on rowboat gitorious account, but there are lots of repo over there, so the best way to get the source is probably the “repo init” instructions in the 2 links above. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as […]

August 30, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Nvidia Has Ported Unreal Engine 3 to Windows RT

After Archos GamePad, more gaming news today, as Nvidia announced Unreal Engine 3 port to Windows RT. The company showcased Epic Citadel demo on Nvidia Tegra 3 based Asus Vivo Tab RT (previously known as Tablet 600) at a press conference held at IFA 2012, in Berlin. The demo above is the full PC implementation running on ARM hardware and renders graphics at 35 to 40fps. The Unreal Engine 3 “Epic Citadel” demo implements the full DirectX 9 pipeline, with shaders and materials. Nvidia also announced that UE3 Windows RT code is available to licensees from Epic now. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

August 30, 2012August 30, 2012 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Archos Announces a 7″ Android GamePad Tablet

Many android games now use virtual buttons on the touchscreen for control, but this may not be optimal for all types of games, which is probably why Archos announced the launch a new type of tablet called the Archos GamePad just before IFA 2012. This device would just be like any 7″ Android 4.0 tablets were it not for the control buttons and analog stick on both sides of the screen. The GamePad is powered by a dual core processor @ 1.5 GHz with a quad core Mali-400 GPU (most likely Rockchip RK3066) with 1GB RAM and 8GB Flash. Here are the GamePad specifications as found on Arctablet.com: Operating System Android 4.0 CPU Rockchip RK3066 CPU @ 1.5 Ghz Integrated GPU: Quad-Core Mali-400 Flash Storage Memory 8 GB System Memory 1 GB Additional storage Micro SD slot (SDXC compatible up to 64GB) Display 1024×600 Expected (TBC) Capacitive MultiTouch Bluetooth No […]

August 29, 2012May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Olimex A13-OLinuXino-WIFI Developer Edition is Now Available

Olimex has announced that they started shipping A13-OLinuXino-WIFI-DEV, an AllWinner A13 development board with 512 MB, 4GB and a Realtek RTL8188CU Wi-Fi module that costs 55.00 Euros with free shipping by courier for a limited time. They announced the start of this project late April, so it took them just 3 months to bring this board to to market. The board has the following specs: SoC – AllWinner A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU Memory – 512 MB RAM Storage – 4GB NAND flash + SD Card slot Power – 6-16VDC input power supply, noise immune design USB – 3 + 1 USB Host, 3 available for users and 1 for Wi-Fi module + 1 USB OTG port Wi-Fi – WIFI RTL8188CU 802.11n 150Mbit module on board Video output – VGA video output + LCD signals available on connector. Audio Output / Input RTC – PCF8536 on […]