Nordic Semi Category - Page 22 of 23 - CNX Software

May 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Arduino Primo Board Supports WiFi, Bluetooth LE, and NFC

A couple of weeks after unveiling Arduino UNO WiFi with ESP8266 and Atmel AVR, Arduino Srl has introduced Arduino PRIMO board with Nordic Semi nRF52 MCU with Bluetooth Smart and NFC, ESP8266 for WiFi, and STM32 to handle GPIOs and USB UART during May Faire Bay Area 2016. Arduino Primo board (A000135) specifications: Service Micro-controller STMicro STM32F103R8T6 ARM Cortex-M3 MCU @ 72 MHz with 64KB flash, 20KB SRAM USB/Uart converter & CMSIS-DAP GPIO expander, IrDA Board power management Operating Voltage – 2.0 to 3.6 V Arduino Micro-controller Nordic nRF52832 ARM Cortex-M4F MCU @ 64 MHz with 512 KB flash, 64KB SRAM Analog I/O Pins – 6 + 1 DAC DC Current per I/O Pins – 7 mA Bluetooth Smart – Up to +4 dBm output power, -96 dBm sensitivity Other features – PDM interface, AES HW enc, NFC tag WiFi Micro-controller Espressif ESP8266 Tensilica Xtensa LX106 WiSoC @ 80 MHz […]

May 10, 2016June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

LX IoT Cores Are Made for IoT and Wearables with Bluetooth LE, ANT+, 2G/3G, Sigfox, LoRa, and More

LX Group, an Australian company specializing in electronics design and embedded systems, has introduced three wireless modules for IoT and wearables which they call “LX IoT Cores”, and embeds various wireless protocol such as Bluetooth LE/Ant+, 2G/3G connectivity, WiFi, Lora, Sigfox, Taggle, etc… Let’s go though the main technical specs for the three modules, one of which it itself modular (hence the max and min size) depending on your requirements. LX Cellular Core (Right) MCU – STMicro STM32F217IGH6 ARM Cortex-M3 MCU @ 120 MHz with 1MB flash, 128kB RAM Storage – 1x micro SD card reader Communication Interfaces Radios – 2G/3G, WiFi, BLE, ANT+, provision for LoRa, Taggle, SigFox, optional GPS via daughter board Wired – USB, RS485, UART, SPI, I2C, Digital IO, ADC Sensors – Ambient Luminosity, accelerometer, gyroscope, magnetometer, temperature, humidity, air pressure, microphone USB – 1x micro USB port Misc – Reset and 2x user buttons, 2x […]

May 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

SkinTrack Controls Your Smartwatch with Gestures on Your Skin or Clothes

A group of researchers of the Future Interface Group, Carnegie Mellon University in the US, has worked on SkinTrack technology which enables continuous touch tracking on the skin by using a ring emitting high frequency AC signal, and a sensing wristband with multiple electrodes. They’ve created sensor band and ring prototypes to demonstrate the technology. The ring includes an oscillator that generated a 80Mhz sine wave at 1.2Vpp. It consumes 7mA during operating meaning that they could get 15 hours out of the 100 mAh battery used in the prototype. The wristband features four pair of electrodes coupled with AD8302 RF/IF gain and phase comparator chips in order to derive X and Y coordinates from the phase of the signal. The sensing board produces eight analog values which are sampled by Atmel ATMega328 microcontroller’s 10-bit ADC inputs, and transmitted to the watch using a Nordic NRF8001 Bluetooth Low Energy (BLE) […]

March 24, 2016March 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

BBC Micro:Bit Board is Now Getting into the Hands of British Students

After several delays, BBC is now giving free Micro:Bit Bluetooth LE enabled boards to UK students with the goal of getting them interested in coding and electronics in a way that’s even easier and cheaper than using a Raspberry Pi board. Micro:bit specifications: MCU – Nordic nRF51822 Bluetooth SoC based on Cortex M0 core @ 16MHz with 16KB RAM 2x user buttons, 1x reset button 25x red user LEDs in a 5×5 matrix Connectivity – Bluetooth LE Sensors – Compass, magnetometer, accelerometer USB – 1x micro USB port for port and programming Expansion – 20-pin edge connector, 5x “rings” for 3V, GND, and 3 digital/analog I/Os Power – 5V via USB or battery port to connect two AAA batteries Dimensions – 4cm x 5cm There are four ways to “code” the board: Code Kingdoms JavaScript graphical ‘drag and drop’ and text-based programming, Microsoft Block Editor graphical, drag and drop code […]

December 22, 2015December 22, 2015 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

SMA-Q Smartwatch Mini Review and Teardown

I had great hopes for SMA-Q smartwatch, as it features an always on color e-Paper display, a built-in heart rate monitor, and promised 30-day standby battery life, as well as being 30-meter water resistant. But last week, I found out that the latter did not mean waterproof, and instead the watch was rated IP65 that’s only good enough to wash hands and a little rain, but not showering let alone swimming. In the last week, I could play with the watch, and found some serious Bluetooth connectivity issues (with Iocean M6752 smartphone), and I was recommended to upgrade the firmware of SMA-Q watch, and after that my Bluetooth issue have somewhat improve, but everything pretty much went downhill, and the watch is now out of order, and shows no sign of life. So while I was expecting to write a full review, I’ll simply report with experience with the watch […]

August 21, 2015August 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Mixtile GENA is a Wearables Development Kit Inspired by Pebble Watch

The first Pebble watch with a black and white e-Ink display and Bluetooth for smartphone connection launched in 2012 via Kickstarter, and it became one of the most successful crowdfunding campaigns so far. The watch can now be purchased for $100, but Focalcrest, a startup based in Shenzhen, designed Mixtil GENA development kit with similar features and user interface, although with different electronics components, that goes for $34 on Tindie. Mixtile GENA specifications: Processors Mediatek MT6260 ARM7EJ-S processor @ 364 MHz with 8MB RAM and 16MB Flash Nordic Semiconductor nRF51822 ARM Cortex M0 Bluetooth Smart SoC External Storage – micro SD card slot (Up to 8GB) Display – “Energy-saving” reflective LCD Connectivity – Bluetooth 4.0 LE USB – micro USB 2.0 port Sensor – Gravity sensor Misc – Up, Down, Enter and Power/Return buttons Battery – 270 mAh/3.7V Lithium-ion battery (4 to 5 days on a charge for typical usage) […]

August 2, 2015August 2, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Simblee Low Latency Bluetooth LE IoT Module Loads Its App to Your Smartphone on Demand

RF Digital launched RFDuino Bluetooth Low Energy board in 2013/2014, and the company has now developed Simblee module, whose name is derived from “Simple” and “BLE”, and offers low latency (3ms) and integrates a user application that’s automatically and temporary loaded to your smartphone or tablet upon connection. The module is also part of an add-on board (RFD77201) for RFDuino board. Simblee RFD77101 module specifications: MCU – ARM Cortex M0 micr-controller (Nordic nRF51822???) Memory/Storage – 24KB RAM and 128KB flash for user application Bluetooth Smart / LE Bluetooth Low Energy (BLE) Stack Simblee interference immunity 3ms latency (for connection); 10us accuracy (jitter) -93dBm receiver sensitivity -55dBm to +4dBm TX power Physical range adjustable from a few inches to hundreds of feet Integrated antenna, integrated shield I/Os 29 GPIOs (flexible pin configuration) 6x ADC inputs 4x PWM outputs 2x SPI master/slave, 2x I2C, 1 x UART Security – Built in AES […]

July 7, 2015March 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

BBC Micro Bit Educational Board Features nRF51822 ARM Cortex M0 MCU

The BBC announces its intention to give away 1 million Micro Bit to British schoolchildren a few months ago, but at the time, the specifications were not completely frozen. The broadcaster has now finalized the design which is based on an ARM Cortex M0 micro-controller. Micro Bit board specifications: ARM Cortex M0 micro-controller (Nordic Micro nRF51822 Bluetooth SoC) 5x holes for 3V, GND, and 3 GPIOs 2x user buttons, 1x reset button 25x red LED indicator lights in a 5×5 matrix Connectivity – Bluetooth LE Sensors – Compass, magnetometer, accelerometer USB – 1x micro USB port for port and programming Power – 5V via USB or battery port to connect two AAA batteries Dimensions – 4cm x 5cm On the software side, the BBC has partnered with Microsoft to develop a web based, drag and drop interface for programming called TouchDevelop. Samsung is also involved in the project as […]