Mediatek Wi-Fi Category - Page 11 of 17 - CNX Software

July 21, 2017July 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Onion Omega2S and Omega2S+ Linux WiFi Modules Launched for OEMs

Onion Omega2 and Omega2+ are tiny WiFi IoT development boards powered by Mediatek MT7688 MIPS processor running LEDE – OpenWrt fork – that sold for just $5 and up in Kickstarter, but are now selling for $7.50 and $9 respectively. The board also support various add-on boards, and a great for evaluation and various projects. But they may not be ideal for people who want to integrate the technology into their products, and that’s why the company have just launched Omega2S and Omega2S+ with about the same specifications, but in a package more suitable to be integrated into products for mass production. Onion Omega2S/2S+ specifications: WiSoC – Mediatek MT7688 MIPS processor @ 580 MHz System Memory / Storage Omega2S – 64MB DDR2 / 16MB flash Omega2S+ – 128MB DDR2 / 32 MB flash Connectivity – 802.11 b/g/n WiFi with u.FL antenna connector Baseboard Interface – Half holes (aka castellated holes) […]

July 3, 2017June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Linux 4.12 Release – Main Changes, ARM & MIPS Architectures

Linus Torvalds has just released Linux 4.12: Things were quite calm this week, so I really didn’t have any real reason to delay the 4.12 release. As mentioned over the various rc announcements, 4.12 is one of the bigger releases historically, and I think only 4.9 ends up having had more commits. And 4.9 was big at least partly because Greg announced it was an LTS kernel. But 4.12 is just plain big. There’s also nothing particularly odd going on in the tree – it’s all just normal development, just more of it that usual. The shortlog below is obviously just the minor changes since rc7 – the whole 4.12 shortlog is much too large to post. In the diff department, 4.12 is also very big, although the reason there isn’t just that there’s a lot of development, we have the added bulk of a lot of new header files […]

June 28, 2017June 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 39 Comments

Banana Pi BPI-R2’s U-boot & Linux 4.4 Source Code & MediaTek MT7623N Datasheet Released

Banana Pi BPI-R2 is a multimedia router board powered by MediaTek MT7623N quad core processor with 2GB RAM, 5 Gigabit Ethernet ports, up to two SATA ports, two USB 3.0 ports, HDMI output, and I/O headers. The board is not for sale yet, but the company has recently released the source code with U-boot and Linux 4.4.70, as well as a datasheet for MediaTek MT7623N processor. The source code can be found on Github, so let’s see if we can build it:

git clone https://github.com/BPI-SINOVOIP/BPI-R2-bsp
cd BPI-R2-bsp/
sudo apt install gcc-arm-linux-gnueabihf
./build.sh

./build.sh NOTICE:
new build.sh default select BPI-R2-720P and pack all boards
supported boards:
BPI-R2-720P

BPI-R2-720P configured. Now run `make`
This tool support following building mode(s):
--------------------------------------------------------------------------------
 1. Build all, uboot and kernel and pack to download images.
 2. Build uboot only.
 3. Build kernel only.
 4. kernel configure.
 5. Pack the builds to target download image, this step must execute after u-boot,
 kernel and rootfs build out
 6. update files for SD
 7. Clean all build.
--------------------------------------------------------------------------------
Please choose a mode(1-7): 1

git clone https://github.com/BPI-SINOVOIP/BPI-R2-bsp

cd BPI-R2-bsp/

sudo apt install gcc-arm-linux-gnueabihf

./build.sh

./build.sh NOTICE:

new build.sh default select BPI-R2-720P and pack all boards

supported boards:

BPI-R2-720P

BPI-R2-720P configured. Now run `make`

This tool support following building mode(s):

--------------------------------------------------------------------------------

1. Build all, uboot and kernel and pack to download images.

2. Build uboot only.

3. Build kernel only.

4. kernel configure.

5. Pack the builds to target download image, this step must execute after u-boot,

kernel and rootfs build out

6. update files for SD

7. Clean all build.

--------------------------------------------------------------------------------

Please choose a mode(1-7): 1

After a couple of minutes, the build would end with:

usr/lib/u-boot/bananapi/
usr/lib/u-boot/bananapi/bpi-r2/
usr/lib/u-boot/bananapi/bpi-r2/BPI-R2-720P-2k.img.gz

Build success!

usr/lib/u-boot/bananapi/

usr/lib/u-boot/bananapi/bpi-r2/

usr/lib/u-boot/bananapi/bpi-r2/BPI-R2-720P-2k.img.gz

Build success!

For the very last step, it asks you to login as root / sudoer, which it should not do… But we end up with the images, so at least it builds:

ls -lh ./SD/
total 27M
drwxrwxr-x 2 jaufranc jaufranc 4.0K Jun 28 10:46 100MB
-rw-rw-r-- 1 jaufranc jaufranc 22M Jun 28 10:46 4.4.70-BPI-R2-Kernel.tgz
-rw-rw-r-- 1 jaufranc jaufranc 151K Jun 28 10:46 BOOTLOADER-bpi-r2.tgz
drwxrwxr-x 3 jaufranc jaufranc 4.0K Jun 28 10:46 BPI-BOOT
-rw-rw-r-- 1 jaufranc jaufranc 4.8M Jun 28 10:46 BPI-BOOT-bpi-r2.tgz
drwxrwxr-x 4 jaufranc jaufranc 4.0K Jun 28 10:46 BPI-ROOT

ls -lh ./SD/

total 27M

drwxrwxr-x 2 jaufranc jaufranc 4.0K Jun 28 10:46 100MB

-rw-rw-r-- 1 jaufranc jaufranc 22M Jun 28 10:46 4.4.70-BPI-R2-Kernel.tgz

-rw-rw-r-- 1 jaufranc jaufranc 151K Jun 28 10:46 BOOTLOADER-bpi-r2.tgz

drwxrwxr-x 3 jaufranc jaufranc 4.0K Jun 28 10:46 BPI-BOOT

-rw-rw-r-- 1 jaufranc jaufranc 4.8M Jun 28 10:46 BPI-BOOT-bpi-r2.tgz

drwxrwxr-x 4 jaufranc jaufranc 4.0K Jun 28 10:46 BPI-ROOT

MediaTek has also been active by committing patchsets for MT7623 to the Linux Kernel Mailing List, so mainline Linux is an eventual possibility for […]

June 17, 2017June 17, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Design Amazon Alexa Gateways, Robots and Smart Speakers with WisCore Modular Development Kit

RAK Wireless has launched a new development board powered by Mediatek MT7628A processor running OpenWrt with built-in WiFi and Ethernet connectivity, and audio codec and microphone to support Amazon Alexa voice service. Bluetooth, Zigbee, and Z-wave will also be supported via UART modules. Wiscore Specifications: Processor – Mediatek MT7628A MIPS24KEc CPU @ up to 580MHz System Memory – 128MB DDR2 (64 MB optional) Storage – 16 MB flash + micro SD card Audio MicroSemi ZL38062 for audio in and out MicroSemi ZL38067 to handle “Alexa” keyword single or dual digital microphone up to 5 meter range Far field voice wake up Support for echo cancellation Connectivity 802.11 b/g/n WiFi 2×2 MIMO up to 300 Mbps 2x 10/100M Ethernet (LAN and WAN) Optional UART modules for Bluetooth, ZigBeem Z-Wave USB – 1x USB 2.0 host port Expansion – Arduino headers with UART, I2C, SPI and GPIOs Power Supply – 5V via […]

June 14, 2017June 14, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

MangOH Red Open Source Hardware Board Targets Cellular Industrial IoT Applications

Sierra Wireless has announced MangOH Red open source hardware platform designed for IIoT (Industrial IoT) applications with a snap-in socket for 2G to 4G & LTE-M/NB-IoT modules, built-in WiFi and Bluetooth, various sensors, a 26-pin expansion header, and more. MangOH Red board specifications: Snap-in socket to add any CF3-compatible modules, most of which based on Qualcomm MDM9215 ARM Cortex A5 processor including: Airprime WP7502 LTE Cat 3, HSPA, WCDMA, EDGE/GPRS module Airprime WP7504 LTE Cat 3, HSPA, WCDMA, CDMA module Airprime WP7601 LTE Cat 4 module Airprime WP7603 LTE Cat 4, WCDMA module Airprime WP8548 HSPA, WCDMA, EDGE/GPRS, and GNSS module AirPrime HL6528RD quad-band GSM/GPRS Embedded Wireless Module designed for the automotive market And more…. Storage – micro SD slot Wireless MCU Module – Wi-Fi 802.11 b/g/n and Bluetooth 4.2 BLE module with an ARM Cortex-M4 core MCU (Mediatek MT7697) providing access to real-time I/Os Wireless Connectivity “Accessories” Micro SIM card […]

June 5, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

MediaTek Unveils MT7686, MT7682, and MT5932 WiFi SoCs for IoT and Smart Home Applications

Beside announcing MT7622 SoC for WiFi and Bluetooth 5 gateways and routers last week, Mediatek also introduced three “next generation” WiFi SoCs for the IoT and the Smart Home market during Computex 2017, namely MT7686, MT7682, and MT5932. Mediatek MT7686 is a wide temperature range WiFi SoC for appliances: MCU – ARM Cortex-M4F @ 192 MHz System Memory – 4MB + 384KB RAM Storage – 4 MB flash with XIP support Connectivity – Low-power 1T1R 802.11 b/g/n Wi-Fi subsystem Peripherals – SDIO I/F, UART, I2C, SPI, I2S, PWM, and auxiliary ADC Power Supply – Integrated Power Management Unit (PMU) Power Consumption – Connected DTIM1 <0.7mA Temperature Range – “Wide” Package – QFN48 (6x6mm) Mediatek MT7682 is promoted as a cost-effective, integrated SoC for multi-Cloud platforms: MCU – ARM Cortex-M4F @ 192 MHz System Memory – 384KB RAM Storage – 512 KB or 1 MB flash with XIP support Connectivity – […]

June 1, 2017November 27, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

MediaTek MT7622 SoC with WiFi Network Accelerator Supports 4×4 802.11n WiFi & Bluetooth 5

MediaTek has launched a new ARM SoC for routers, home automation gateways, wireless audio and storage, with MT7622 equipped with a dual core ARM Cortex A53 processor, a dedicated network accelerator, 4×4 802.11n and Bluetooth 5 connectivity. Two models with be available: MT7622A with all features, and MT7622B with router features only, which probably mean no Bluetooth, and possibly less I/Os. MediaTek MT7622 specifications: Processor – Dual core ARM Cortex A53 @ up to 1.36 GHz Storage – eMMC and SDXC interfaces; storage accelerator (SATA 3.0/eSATA Gen2) Connectivity 802.11b/g/n WiFi @ 2.4GHz, 4T4R antenna; 802.11ac can be added through MT7615 SoC Bluetooth 5 Fast Ethernet Switch, RGMII and SGMII Network Accelerator – APT+HQoS, MediaTek Wi-Fi Warp Accelerator Audio – Audio Amplifier, I2S, TDM, S/PDIF USB – USB 2.0 host/device, USB 3.0 host Other Peripheral Interfaces – PCIe Gen 2.0, ADC, GPIO, I2C, IR, PMIC I/F, PWM, SPI, UART Misc – RTC The specs on the product […]

April 26, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

$14 LinkIt 7697 Bluetooth 4.2 LE and WiFi IoT Board is Powered by Mediatek MT7697 ARM Cortex-M4 MCU

Mediatek Labs has launched a new IoT development, which on the surface looks similar to LinkIt Smart 7688 board, but the internal design is quite different as the MIPS processor and Linux OS, have been replaced by Mediatek MT7697 ARM Cortex-M4 processor running FreeRTOS, and beside WiFi, also includes support for Bluetooth 4.2 LE. LinkIt 7697 board specifications: Wireless SoC – Mediatek MT7697 ARM Cortex M4F MCU @ 192 MHz with 352KB RAM, 4MB flash, 802.11 b/g/n WiFi, Bluetooth 4.2 LE and a PMU Expansion – 2x 14-pin header with 18x GPIO, 2x UART, 1x I2C, 1x SPI, 18x PWM, 4x EINT, 4x ADC (0 to 2.5V), 1x IrDA, 1x I2S Debugging – 1x SWD, CP2102 UART to USB chipset Misc – Reset and user buttons; power and user LEDs Power Supply – 5V via micro USB port Dimensions – 48 x 26 mm The board can be programmed with […]