Intel Atom Category - Page 51 of 59 - CNX Software

September 3, 2014September 3, 2014 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

Quad Core Android Tablet for $47, Wintel Tablet for $65

When I think about $50 tablets, I think about 512MB RAM, 4GB flash, 800×480 resolution display and so on… But there’s currently a 7″ quad core Android tablet (eZee Tab 7Q11-L) that sells for $46.99 on BuyinCoins including shipping, which has some slightly better specs with 1GB RAM, 8GB flash, and a 1024×600 resolution touchscreen display. Here are the specifications listed on Buyincoins: SoC – Action Semi ATM7029B quad core Cortex A5 class processor @ 1.3Ghz with PowerVR SGX540 GPU System Memory – 1GB DDR3 Storage – 8GB NAND flash and micro SD slot up to 32GB. Display – 7″ multi-touch capacitive touch screen with 1024 x 600 resolution Video Output – micro HDMI Audio Output – 3.5mm audio jack, speaker Connectivity – 802.11 b/g/n Wi-Fi, optional? Bluetooth (RTL8723AS-VT) Camera – 0.3MP front camera Sensors – Accelerometer, “automatic steering display screen”, G-sensor Misc – Volume +/-, power and home buttons […]

September 1, 2014September 1, 2014 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

MINIX NEO Z64 is an Intel Atom Z3735F Bay Trail mini PC Selling for $129

If you thought the upcoming ZBOX ZOTAC PI320 mini PC powered by Intel Bay-Trail-T Atom Z3735F quad core processor was nice and small (and powerful), but at $199, a little pricey, MINIX NEO Z64 may be what you are looking for. On On the outside, NEO Z64 looks very much like the company’s NEO X8 Android TV Box, but inside it’s powered by the same Z3735F processor with 2GB RAM, and 32GB eMMC, and it’s is expected to sell for just $129. MINIX NEO Z64 specifications: SoC – Intel Atom Z3735F “Bay Trail” quad core processor @ 1.33 GHz (Burst freq up to 1.83 GHz) and Intel HD Graphics System Memory – 2GB DDR3L Storage – 32GB eMMC flash + micro SD slot Connectivity – 10/100M Ethernet, Wi-Fi 802.11n + Bluetooth 4.0 Video Output – HDMI Audio Output – Analog Stereo output, HDMI USB – 2x USB 2.0 Misc – […]

August 30, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

MinnowBoard MAX Schematics, Board layout, Gerber, and BoM Released

MinnowBoard MAX (aka MinnowBoard2) is an embedded board powered by Intel Atom Bay-Trail-I E3815 (single core) or E3825 (dual core) processor, with 1 to 2GB RAM, SATA II, USB 3.0, Gigabit Ethernet ports, and more. The board currently officially supports four operating systems: Debian GNU/Linux, Linux built with the Yocto Project, Android 4.4, and Windows 8.1. One of its main selling point is the price as the single core version sells for $99, and the dual core version for $129, rivalling in price with equivalent ARM based development boards. It’s also an open source hardware board, and as it’s now about to ship, CircuitCo released all hardware files under a Creative Commons CC-BY-SA license, allowing anybody with the right skills to create a clone, or their own hardware. Here are the files that have been released: Schematic (PDF) Schematic (Orcad DSN) Board Layout (Allegro BRD) Gerbers Bill of Materials Schematics […]

August 28, 2014 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

ZOTAC ZBOX PI320 is a Pocket-Sized Intel Bay Trail-T Mini PC

If you’re a fan of HDMI TV sticks, but wished it could use an Intel processor, instead of the various ARM processors currently available, your dream may have come true thanks to ZOTAC ZBOC PI320 mini PC. Although it’s not quite as small as your standard HDMI TV stick, it’s small enough (115.5mm x 66mm x 19.2mm) to fit into your pocket, and it’s also much more powerful, as it features Intel Atom Z3735F quad-core Bay Trail-T processor, 2GB RAM, 32GB flash, wired and wireless connectivity and more. ZBOX PI320 pico-series mini PC specifications: SoC – Intel Atom Z3735F “Bay Trail” quad core processor @ 1.33 GHz (Burst freq up to 1.83 GHz) and Intel HD Graphics System Memory – 2GB DDR3L @ 1333 MHz (soldered) Storage – 32GB eMMC flash (soldered) + “3-in-1” card reader (micro SD/SDHC/SDXC) Connectivity – 10/100M Ethernet, Wi-Fi 802.11n + Bluetooth 4.0 (AP6383) Video Output […]

August 21, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Embedded Linux Conference Europe 2014 Schedule – IoT, ARM vs x86, Optimization, Power Management, Debugging…

The Embedded Linux Conference Europe (ELC 2014), CloudOpen, and LinuxCon Europe will jointly take place at the Congress Centre Düsseldorf, in Germany on October 13 – 15, 2014. The 3-day events will consists of keynotes, presentations, and tutorials. Each day will open with two or three keynotes by speakers including Jim Zemlin (Executive Director, Linux Foundation), and Jono Bacon (XPRIZE), followed by presentation and tutorials. There will be 45 presentations for ELCE, 58 for LinuxCon, and 47 for CloudOpen, I’ll make a virtual schedule with a few sessions part of the Embedded Linux Conference Europe “track”. Monday, October 13 11:15 – 12:05 – Performance Analysis Using the Perf Suite by Mans Rullgar, Consultant When faced with a performance problem, the initial steps towards a solution include identifying the sections of code responsible and the precise reasons they are time-consuming. To this end, the ‘perf’ profiling tools provide valuable insight into the […]

August 17, 2014August 17, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

XBMC / Kodi 14 Ported to Tizen 3.0 Wayland

XBMC, soon to become Kodi with version 14, is now supported in Linux, Windows, Mac OS X, Android, and iOS. But Kodi 14 may soon support Tizen, as Phil C., a Tizen developer, ported the alpha version of Kodi 14 to Tizen 3.0, and showcased it on an Intel “Bay Trail” NUC powered by Intel Atom E3815 single core processor. Intel 3815 NUC is officially supported by Tizen and an image is available for download, so most of the work was to build Kodi 14 Alpha, install required packages, and configure some scripts. The video below shows XBMC/Kodi 14 UI running on Tizen 3.0, and a video played from YouTube, and after about 3 minutes, he explains how to modify the BIOS to have the system boot and work properly for the rest of the video. If you happen to own an Intel E3815 NUC, but it could also work […]

July 30, 2014July 30, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Sharks Cove Intel Atom Bay Trail-T Development Board for Windows and Android is Now Available for $299

When Intel announced their Sharks Cove development board, they did not provide that much information, except for the fact that it aimed at Windows development, it would be easy to buy for hobbyist, and provided a picture of the board. The board has now been launched, is available for pre-order for $299, and technical details have been published. Intel Sharks Cove specifications: Soc – Intel ATOM Processor Z3735G, 2M Cache, 4 Core, @ 1.33GHz (Burst frequency: 1.88GHz) with Intel HD Graphics System Memory – 1GB 1×32 DDR3L-RS-1333 Storage – 16GB EMMC 4.5, micro SD Card slot, 2MP SPI NOR Video Output / Display – HDMI connector and MIPI Display Connector Audio – Realtek ALC5640 audio codec, 3.5mm stereo headphone jack, header for speaker, and on-board digital mic Connectivity – None. But Ethernet or WiFi can be added through USB. USB – 1x USB 2.0 type A connector, 1x micro USB […]

July 28, 2014July 28, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

MPL CEC10 Compact Embedded Computers Feature Bay Trail SoCs, 5 Gigabit Ports, Rugged Enclosures

MPL, a company specializing in industrial PCs based in Switzerland, has recently announced their CEC10 series “Compact Embedded Computer” featuring Intel Bay Trail-I E3800 processors, with 5 Gigabit Ethernet ports using RJ45, M12, or SFP connectors, and supporting industrial and extended temperature ranges, and as well as various rugged housings. Specifications for MPL CEC10: SoC – Intel Atom E3800 series single, dual, or quad processor @ up to 1.91GHz with Intel HD graphics. System Memory – up to 4GB DDR3L ECC-RAM Storage: mSATA interface Optional 2.5-inch SATA HDD/SSD Optional eMMC flash (soldered) Video Output- DisplayPort, optional eDP / VGA Connectivity – 5x gigabit Ethernet ports. RJ45 connectors by default, but the system also supports M12 connectors or SFP cages. USB – 1x USB 3.0 host port, 1x USB 3.0 device port, 2x USB 2.0 ports Serial – 1x RS-232 port, optional RS-232/422/485 or extra RS-232 port Expansion Slots: Mini-PCIe slot […]