NXP i.MX Category - Page 56 of 68 - CNX Software

July 15, 2013 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

$99 (and up) Compulab Utilite ARM based Computer Runs Ubuntu or Android

If you’re ready to tinker it’s possible to run Linux in one of the low cost ARM based set-top boxes or mini PCs currently available, although if you need Linux with 3D acceleration and video playback, your only realistic option is to go with solutions based on Freescale i.MX6. Compulab has been developing a mini desktop computer based on Freescale i.MX6 Solo, Dual or Quad that will run either Ubuntu or Android, so you don’t need to mess around to run Ubuntu on cheap ARM hardware. The device is expected to sell for $99 and up starting in August according to Fanlesstech. Compulab Utilite will have the following specifications: SoC – Freescale i.MX6 single / dual / quad core Cortex-A9 up to 1.2GHz, with Vivante GPU, and Video Processing Unit supporting multi-stream 1080p H.264, VC1, RV10, DivX HW decoding System Memory – Up to 4GB DDR3-1066 Storage – 1MB SPI […]

June 19, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

F&S armStoneA9 is a Pico-ITX Board Powered by Freescale i.MX 6 with up to 4GB RAM

F&S Elektronik Systeme GmbH has announced the armstoneA9, a pico-ITX board featuring Freescale i.MX 6 Solo/Dual or Quad Cortex A9 processor with up to 4GB DDR3 SDRAM, and 128 MB flash (1GB+ flash optional) that available in both commercial and industrial temperature range. Here are the specifications of the board: SoC – Freescale i.MX 6 Cortex-A9 (Quad-/ Dual-/ Single-Core) @ 800 MHz to 1 GHz with Vivante GPU System Memory – 1GB (standard version) to 4 GB DDR3 SDRAM Storage – 128MB Flash (1GB+ optional), micro-SD Card Slot, and SATA interface Display: up to SVGA (800 x 600, 65536 colors) via RGB up to WUXGA (1920 x 1200, 18Bit/ 24Bit) via 2x LVDS up to FullHD (1920 x 1080, 24Bit) via HDMI Touch Panel – 4-wire, analogue resistive and PCAP-Touch Interface via I2C Interfaces: 1x 10/100/1000MBit Ethernet 3x Serial (2x RS232, 1x TTL 3.3V Level) 1x USB 2.0 Host, 1x […]

June 11, 2013June 11, 2013 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Wandboard Dual Benchmarks, Serial Console Fun, and Distributions List

Since last time I tried Android and Ubuntu on the Wandboard, a few things happened. I’m not talking about Wandboard Quad announcement, but instead I received a Class 10 SD card, which makes the system so much responsive, and a RS232 to USB adapter so that I can access the serial console. So today, I’ll publish some benchmark results on Wandboard Dual since none appear to be available, and play a little with the serial console. A few things also happened on the operating systems side with more distributions now available for the board. Prerequisites I ran benchmark in Android, so I installed the latest Android 4.1.2 image (11th of April 2012) to my new SD card (ADATA 16 GB Class 10), and contrary to my poor experience on a 4GB Class 4 micro SD, everything was very fluid. I’ve also installed Google Play in order to install the applications. […]

May 27, 2013May 27, 2013 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

$129 Wandboard Quad Board With Freescale i.MX 6Quad and 2GB RAM

When Wandboard launches their Wandboard Solo and Wandboard Dual boards, many people asked when there would be a quad core version. At the time, the company said they had no plan for a quad core version to keep costs low. If we are to believe a Wandboard Quad listing on mouser.com, they must have changed their mind of they now offer a Freescale i.MX6 Quad version with 2GB RAM, and SATA support, which will sell for $129 (as shown on Wandboard site) or $139 (mouser.com) once it becomes available. The Specifications are very similar to Wandboard Dual, except for the quad core processor, 2GB RAM, and working SATA connector: SoC – Freescale i.MX 6Quad quad core Cortex A9 processor @ 1.2 GHz + Vivante GC2000 GPU System Memory – 2GB RAM Storage – 2x micro SD card slot + SATA connector Video Output – HDMI Audio I/O – HDMI, S/PDIF […]

May 27, 2013May 27, 2013 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

UDOO QUAD vs BeagleBone Black vs Wandboard Dual vs ODROID-X2 vs Raspberry Pi

UDOO QUAD is a development board featuring both Freescale i.MX 6Quad and an Atmel SAM3 Cortex M3 MCU, that’s currently having a very successful campaign on Kickstarter, as the total amount pledged is now close to $500,000 US. UDOO decided to put a comparison table against four other ARM Linux boards they consider their main competitors: the BeagleBone Black for its numerous I/O options, Wandboard Dual, also a Freescale i.MX6 powered board, the ODROID X2 for its powerful Exynos 4412 processor, and Raspberry Pi model B which is ubiquitous. The Cubieboard board would also have been an interesting addition, but they did not include it. As you would have guessed the green parts in the tablet shows the winner for each features according to UDOO team. These 5 boards vary greatly in terms of price, and since this is not included in the table above, I’ll mention the price of […]

May 23, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Digia Brings Qt to Embedded Android Devices with Boot to Qt

Digia has recently announced Boot to Qt Technology Preview, a commercial offering that provides a solution for the creation of user interfaces on embedded systems. For the first version, they stripped out Android of Java, or other unnecessary parts (Zygote, SurfaceFlinger), added Qt/QML, and tested it on on ARM and x86 hardware. Boot to Qt includes the following main features: A light-weight UI stack for embedded Linux, based on the Qt Framework – Boot to Qt is built on an Android kernel/baselayer and offers an elegant means of developing beautiful and performant embedded devices. Ready-made images – We have images for several different devices which include the Boot to Qt software stack, making it possible to get up and running with minimal effort from day one. Full Qt Creator Integration – One-click deploy and run on hardware and a fully featured development environment. Simulator – A VirtualBox based simulator which allows device development […]

May 22, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Wi-Fi Performance Comparison for Android Media Players and HDMI Sticks

If you’re mainly using your Android mini PC or STB to stream videos over the web or your local network, Wi-Fi performance is actually more important than CPU performance, and I’ve recently had quite a few issues with Wi-Fi with both T428 (RK3188 / Broadcom Wi-Fi module) and CS868 (AllWinner A31 / Realtek Wi-Fi module), which were only fixed after upgrading my router firmware. So I’ve decided to re-test most of the mini PCs I own with the upgraded router firmware, and the number are highly confusing, and I found out there’s probably be no easy to way to estimate the overall Wi-Fi performance of any device, and it’s most probably highly dependent on the router used, and its firmware version. My router is TP-LINK WR940N, a 300 Mbps Wireless N router with three antennas. Since I bought it, I had never upgraded the firmware (3.9.18 Build 100104 Rel.36350n) from […]

May 21, 2013May 29, 2013 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Linux-based $99 Ceptor HDMI Stick Powered by Freescale i.MX 6Dual

Thanks to individuals developers, we’ve been able to get Linux distributions based on Ubuntu, or Debian run on HDMI TV dongles for about a year, but nearly all of them just come with Android and that’s it. The only two exceptions I can think of are PengPod Pengstick and FXI Technologies Cotton Candy, where actively work on Ubuntu support, and provide images to boot from microSD. But now, Devon IT has developed a mini PC, called Ceptor powered by Freescale i.MX 6Dual processor with 1GB RAM, and up to 32GB Flash. It runs Linux-based ZeTOS operating system, and is destined at creating virtual desktop solutions for the enterprise. The casing just looks like HiaPad Hi802 or Zealz GK802 , but the internal specifications are slightly different: SoC – Freescale i.MX 6Dual @ 1 GHz + Vivance GC2000 GPU System Memory – 512MB or 1GB DDR3 Storage – up to 32GB eMMC […]