AMLogic Category - Page 84 of 95 - CNX Software

July 3, 2014 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

How to Use an Android TV Box as a Wi-Fi Access Point

Today, I’ve come across another potential use case for Android TV boxes with Wi-Fi and Ethernet. Let’s say you are in a room with Ethernet, but there’s no Wi-Fi signal or the signal is too weak, and want to use your smartphone to connect to the Internet via Wi-Fi. If you don’t have one of these small (openWRT) Wi-Fi router with you, but instead brought an Android mini PC, you can configure the “Portable Hotspot” function to transform it into a secure Wi-Fi access point. Assuming you’ve connect an Ethernet cable, and powered the device, first make sure Ethernet is enabled\, and Wi-Fi is disabled in the Settings menu. To click on Settings->More.. in the Wireless & Networks section, and select “Tethering & portable hotspot” or simply “Portable hotspot” depending on your firmware. In the next menu, click on Portable Wi-Fi hotspot to enabled it, then “Set up Wi-Fi Hospot” […]

June 26, 2014June 26, 2014 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Zoomtak T8 Android TV Box Powered by Amlogic S802 Features a 2.5″ SATA Bay, an Aluminum Enclosure

There are now several Android TV boxes powered by Amlogic S802 such as Tronsmart Vega S89, SZTomato/Eny M8, and Minix Neo X8, and Zoomtak T8 hardware specifications are quite similar to these three devices, except it happens to feature an internal 2.5″ SATA bay placed under the board, and the body is made of aluminum. Zoomtak T8 specifications: SoC – Amlogic S802 quad core cortex A9r4 @ 2 GHz with Mali-450MP6 GPU System Memory – 1GB DDR3 Storage – 8GB NAND flash + SD/MMC/MS card reader + 2.5″ SATA bay Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi with external antenna. Video Output – HDMI 1.4a, composite output, and component output Audio Output – HDMI, stereo RCA, and optical S/PDIF Video Container Formats – DAT, MPEG, MPE, MPG, TS/TP, VOB, ISO, AVI, MP4, MOV, 3GP, FLV, MKV, M2TS, MTS, M4V, WMV, ASF, RM/RMVB, etc… Audio Formats – MP2, MP3, WMA, WAV, […]

June 22, 2014June 24, 2014 by Jean-Luc Aufranc (CNXSoft) - 102 Comments

Giveaway Week – Tronsmart Prometheus Android STB

The last product for this giveaway week will be Tronsmart Prometheus, and Android TV Box with hardware specifications very similar to Gbox Midnight MX2, namely an Amlogic AML8726-MX dual core processor, 1GB RAM, 4GB flash, HDMI and AV output, optical S/PDIF output, Wi-Fi and Ethernet connectivity and 3 USB ports. My first review had Prometheus run Android 4.1 firmware, but since a firmware update meant it was one of the first Android media player that could run Android 4.2 and XBMC, I also decided to write an updated review, in which I found the firmware to be responsive and stable, XBMC to work as expected except for a few videos (RMVB, MPEG-2) and more critically audio/video sync issues, but these have been fixed in a subsequent firmware update. To enter the draw simply leave a comment below. I can’t find the HDMI cable, so it won’t be included in the […]

June 19, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Geniatech Announces Dragon Board Industrial SBCs Powered by Amlogic Dual and Quad Core Processors

Not to be confused these DragonBoards, Geniatech has announced two industrial single board boards, namely Dragon Board I and Dragon Board II, respectively powered by Amlogic AML8726-MX dual core Cortex A9 SOC, and S801/S802/M805 quad core Cortex A9r4 SoC, and targeting applications such as digital signage player, and display applications for the hospitality industry. Let’s go through the specifications of both boards: SoC Dragon Board I (DB I) – Amlogic AML8726-MX dual core ARM Cortex A9 @ 1.5GHz with Mali-400MP2 GPU Dragon Board II (DB II) – Amlogic S802 quad core ARM Cortex A9r4 @ 2GHz with Mali-450MP6 GPU System Memory DB I – 1GB (1600Mbps data rate) DB II – 2GB (1600Mbps data rate) Storage – 4GB NAND flash (up to 32GB as option), micro SD card slot, SATA interface Video I/O Common – HDMI output, LVDS, and CVBS. DB I only – VGA DB II only – HDMI input […]

June 19, 2014June 21, 2014 by Jean-Luc Aufranc (CNXSoft) - 95 Comments

Giveaway Week – Gbox Midnight MX2 Android Media Player

The fourth prize for this week is Matricom Gbox Midnight MX2, an Android TV box powered by Amlogic AML8726-MX dual core processor with 1GB RAM, 4GB flash, HDMI and AV output, optical S/PDIF, Wi-Fi and Ethernet, and 4 USB ports. The company had specifically worked on the XBMC port at the time, and I found it did a pretty good job. I tested the device in May of last, and I found the firmware to be very stable and responsive, and XBMC works as expected, supporting most video files without issues, except some MPEG-2 had aspect ratio issues,, RMVB files would make XBMC exit, and WebM 1080p could not be played smoothly due to software decode for this particular codec. It could decode all high-end audio codecs such as DTS and Dolby just fine. I did have problems with composite and component outputs but it must have been fixed now. […]

June 16, 2014June 18, 2014 by Jean-Luc Aufranc (CNXSoft) - 87 Comments

Giveaway Week – Jynxbox M1V2 Pure Linux XBMC

When Theaterinabox sent me a Jynxbox M1V2 for review, I was a little surprised to actually receive two. The reason was that I got one for review, one for giveaway. But since I need to drive to the post office anyway, I’ll just giveaway both, and actually start a giveaway week giving 8 different boxes to my readers starting today with the two Jynxbox M1V2, then one a day until Sunday. Let’s talk about the device a bit more. Jynxbox M1V2 is one of the few Linux based XBMC available on the market. It’s based on Amlogic AML8726-M3 Cortex A9 processor, with 1GB RAM and 2GB flash, with several XBMC add-ons pre-installed. You can read my review to get the detailed specs, and pictures. The conclusion of my testing was that the user interface was pretty smooth considering the low end processor, Wi-Fi was excellent, and I was pleasantly surprised […]

June 12, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

MyGica ATV582 Enjoy TV Box Powered by Amlogic S802 Is Now Available for $139

Geniatech has historically been the company which first delivered set-top box and media player solutions based on Amlogic processors. I’m not sure it’s still the case with Amlogic S802 and other S80x SoCs, as other companies appear to have released their products first such as Tronsmart Vega S89 and M8 Android TV boxes, but Geniatech ATV582 based on Amlogic S802 quad core processor has been available since April under the company’s retail brand Mygica. Mygica ATV582 specifications: SoC – AMLogic S802 quad core Cortex A9r4 processor @ 2GHz with Mali‐450MP6 GPU System Memory – 1GB DDR3 Storage – 8GB NAND flash + micro SD card slot Connectivity – 10/100M Ethernet, Wi‐Fi 802.11 b/g/n Video & Audio Output – HDMI, AV. HDMI supports 1080p, 4K2K 30fps Video Codecs and Containers – MPEG1/2/4, H.264, AVC, VC‐1, RM/RMVB, Xvid, DivX3/4/5/6, RealVideo8/9/10… Audio – MP3, WMA, AAC, WAV, OGG, AC3, DDP, TrueHD, DTS, DTS […]

June 3, 2014June 3, 2014 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Jynxbox M1V2 Pure Linux XBMC Media Player Review

Theaterinabox.tv has sent me Jynxbox M1V2 TV box running XBMC Linux Gotham 13.0, and powered by Amlogic AML8726-M3 processor @ 1 GHz with 2GB Flash and 1 GB RAM. This is an upgrade of the first version featuring AML872-M1 and 512 MB RAM. I’ll go through the specs first, then show some unboxing pictures and video, and complete this post by reviewing the device by playing videos from the network and a USB flash drive, as well as going through the available add-ons in a video review. Jynxbox M1V2/M1+ Specifications Here are the specifications listed for Jynxbox M1V2 Pure Linux, aka Jynxbox M1+: SoC – Amlogic AML8726-M3 @ 1GHz with Mali-400 GPU System Memory – 1GB RAM Storage – 2GB NAND flash + micro SD card reader (up to 32GB) Video & Audio Output – HDMI up to 1080p (default: 720p) Video Codecs & Containers- MPEG 1/2/4, H.264, X264, VC-1, WMV, M2TS, TS, RMVB, […]