AMLogic Category - Page 71 of 95 - CNX Software

August 31, 2015November 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

Tronfy MXIV Telos TV Box Review with Android 5.1

Tronfy MXIV Telos is a TV box powered by Amlogic S812 processor running Android 5.1 Lollipop and costing just above $90 (with coupon), so it will be interesting to find out how it performs compared to Mygica ATV1900AC also based on Amlogic S812 SoC, and Android Lollipop firmware (version 5.0.2), which I reviewed recently, and sells for $169. I’ve already checked the hardware in Tronfy MX4 Telos Unboxing and Teardown, so today I’ll check how the device actually performs. First Boot, Settings and First Impressions I started by connecting peripherals: A USB hard drive to one of the USB port, and a USB hub to the other USB port with a webcam, and two RF dongles for an air mouse and a wireless gamepad, as well as HDMI and Ethernet cables, and the power supply. I then had to press the power button on the unit to start it up, […]

August 27, 2015August 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Review of Mygica ATV586 Android Set-Top Box with DVB-T2 Tuner

I’ve already tested some Android TV boxes with tuners such as HD18T (DVB-T2) and WeTek Play (DVB-S2) , but they were all based on Amlogic AML8726-MX dual core processor. Geniatech recently sent me Mygica ATV586 quad core Android DVB-T2 receiver based on Amlogic S805 processor. I’ve already taken a few pictures, and look at the hardware components, so today, I’ll write the review, mainly focusing on the live TV program capabilities including PVR and Timeshifting. First Boot, Settings and First Impressions I’ve connected a hard drive, a webcam, MeLE F10 Deluxe RF dongle, and a keyboard (for screenshots) to the device’s USB ports, as well as HDMI and Ethernet cables, and a TV antenna cable, before connecting the 5V power adapter to start the device. When everything is connected, the boot takes about 1 minute 35 seconds, but without USB devices, it drops down to 44 seconds. Boot time is […]

August 25, 2015October 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

WeTek Core Android 5.1 TV Box to Support Netflix in HD, OpenELEC, Lubuntu and More

Last year, WeTek launched WeTek Play Android TV receiver with DVB-T2, DVB-S2 or ATSC tuners, and in my review of the DVB-S2 version I found out it was a rather capable device despite the low hardware specifications. The company is about to launch WeTek Core, a media player powered by Amlogic S812-H processor, running Android 5.1.1, as well as supporting Netflix up to 1080p. something most other Android media players can’t handle. WeTek Core preliminary specifications: SoC – Amlogic S812-H quad core processor @ 2.0GHz with an Octa-core Mali-450MP gpu System Memory – 2GB DDR3 Storage – 8GB NAND flash, micro SD slot Video Output – HDMI 1.4 up to 4K @ 30Hz + AV Audio Output – HDMI, AV, and optical S/PDIF Connectivity – Gigabit Ethernet, 802.11 b/g/n & 802.11ac (TBC), and Bluetooth 4.0 USB – 2x USB 2.0 host ports Misc – Power button and LED Power Supply […]

August 22, 2015August 25, 2015 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Tronfy MX4 Telos Android 5.1 TV Box Unboxing and Teardown

I’ve recently reviewed Mygica ATV1900AC TV box powered by Amlogic S812 with 2GB RAM and 16GB eMMC running Android Lollipop, a device with some high quality components, and a RF remote with voice command and search function that sells for $180. Tinydeal, a Hong Kong-based online shopping site specialized in electronic goods, sent me Tronfy MX4 Telos with very similar specifications including support for 802.11ac and Gigabit Ethernet, but selling instead for nearly half price at $98.99 including shipping. The firmware is also based on Lollipop, and runs Android 5.1.1 instead of Android 5.0.2, and it will be interesting to find out how the cheaper product fare against the higher-end one. Tronfy MX4 (MXIV) Telos Specifications Since it’s the first time I come across this box, I’ll list the specifications first: SoC – Amlogic S812 quad core cortex A9r4 @ 2 GHz with Mali-450MP6 GPU System Memory – 2GB DDR3 […]

August 20, 2015August 29, 2015 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Mygica ATV1900AC Android 5.0 Mini PC Review

4K TV boxes based on Amlogic S812 processor have been around for about 9 months, and I already reviewed MINIX NEO X8-H Plus and CX-S806 mini PCs, but Mygica ATV1900AC is one of the first to support Android Lollipop, so I though it would be interesting to see the progress made compared to devices that run Android KitKat. I’ve already taken apart the TV Box, and found some interesting Toshiba eMMC flash and Realtek 802.11ac WiFi chips on the board, but today, I’ll test the firmware including stability, features and performance in this review. First Boot, Settings and First Impressions I’ve connected all ports of the device using the four USB host port with a webcam, hard drive, an RF dongle for a wireless gamepad, the RF dongle for the included remote, as well as inserting an HDMI cable, an optical audio cable S/PDIF, an Ethernet cable to Gigabit switch, […]

August 15, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Touchjet WAVE Adds Android and Touchscreen Capability to Your TV (Crowdfunding)

There are already ways to convert your TV into a smart TV running Android with touchscreen support, but you’d need to buy an Android mini PC and a infrared touch frame overlay for your TV both of which should cost several hundred dollars in total, and the larger your TV the costlier the price, and once you get the hardware, you may also need to modify your kernel source code to enable USB touchscreen… A US start-up is now working on a much cheaper and easier way to achieve this with Touchjet WAVE, a quad core Android mini PC that integrates an infrared sensor to track finger movements and taps across the screen of your existing TV. Touchjet WAVE specifications: SoC – Quad-core ARM Cortex A9 processor @ 2.0 GHz (Likely Amlogic S802 or S812) System Memory – 1GB DDR3 Storage – 8GB flash Video Output – HDMI 1.4 Touchscreen […]

August 13, 2015August 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Mygica ATV586 Quad Core Android DVB-T2 Receiver Unboxing and Teardown

Today, I received both Mygica ATV1900AC and ATV586 from Geniatech. I’ve already taken apart ATV1900AC, so it’s now the turn for Mygica’s latest Android DVB-T2 receiver powered by Amlogic S805 to get photographed and torn down. If you don’t like in a region where DVB-T2 is supported, Mygica also sells a version with an ATSC tuner. Mygica ATV586 Unboxing That’s the retail package for the receiver that shows the tuner type (DVB-T2), and that the box is based on a quad core processor supporting HEVC/H.265 video codec and running Kodi in Android 4.4. There are quite a lotf of accessories in the package including the usual HDMI cable, 5V/2A power supply, and IR remote with two AAA batteries, but there’s also a TV antenna set with an indoor antenna and mounts. I’ll try the indoor antenna, but it’s unlikely to work in my location, so I’ll probably connect the box […]

August 13, 2015August 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Mygica ATV1900AC Android Lollipop TV Box Unboxing and Teardown

Geniatech sent me two samples of their latest Android devices this morning with Mygica ATV1900AC TV box powered by Amlogic S812 quad core Cortex A9 processor, and Mygica ATV586 DVB-T2 receiver powered by Amlogic S805 quad core cortex A5 processor. Beside relatively high-end specs with 802.11ac, Gigabit Ethernet, 2GB RAM, and 16GB eMMC, one of the former main selling point is the Android Lollipop firmware that is said to brings significant improvement over Android 4.4 KitKat. But today, I’ll focus on the hardware side with pictures of the devices and its internals, before writing the results of my tests in a few days. Mygica ATV1900AC Unboxing Geniatech sent me both boxes in a DHL parcel, and both are Mygica branded retail packages. Mygica ATV1900AC packages shows some of its key features like Android Lollipop support, 4K UHD, H.265, 802.11ac WiFi, voice search and so on… Most TV boxes ship with […]